PopRocket123

This is actually for an air rifle but I'm really happy with how it's coming out. It's for the Reximex Pretensis and is based on the KRG Whiskey 3 chassis. Not bad for 3 days work. Now onto the boring stuff. Screw fittings etc.

This is actually for an air rifle but I'm really happy with how it's coming out. It's for the Reximex Pretensis and is based on the KRG Whiskey 3 chassis. Not bad for 3 days work. Now onto the boring stuff. Screw fittings etc.

A couple of other things I've been working on. I got the EMG speedloader but battery size is limited so I knocked up a base that allows for a larger battery and somewhere to keep all the adapters otherwise I'll lose them in about 5 minutes.


 
I also bought the WELL Rattler and didn't fancy using the PEQ box for the battery so I knocked up a longer rattler style handguard and added a 50mm barrel extension to allow for a saddlebag lipo to be contained inside the handguard. Original handguard is shown to show the size difference. 
 

I thought it might be useful to have a phone mount on my plate carrier so that I can use the Ares Alpha app to see my location, that of the objectives etc. So I got myself a cheap mount from AliExpress that protects the phone and holds it securely in place (in landscape mode) on my chest. I can then simply open it up slightly, see my location on the map and close it again.
 
And then I started testing it:
To unlock my iPhone you swipe up from the bottom, however the mount has a strap over the phone to hold it in place and you can’t do it without sliding the phone out. ❌ Face ID on the iPhone only works if it can see your face but I’ll be wearing a mask. ❌ Ok I enable ‘unlock with Apple Watch’ but the phone will not do it when in landscape mode, only portrait mode ❌ So I enter a passcode but I would have to take off my gloves to do that ❌ When the phone is unlocked I can’t actually see anything as it is too close to my face and I would need to wear my reading glasses to see anything detailed. ❌ But apart from that it really works nicely😂 

Was asked to knock up a Magpul style MP5 handguard as the real thing seems to be out of stock everywhere. It's not an exact copy but close enough I think.
Top one is printed smooth in ABS and the bottom one in PLA using the Bambu labs fuzzy setting.

This is what happens when you let someone with adhd who is incapable of making a decision design something. You get 4 different versions of the same thing

This is what happens when you let someone with adhd who is incapable of making a decision design something. You get 4 different versions of the same thing

This is what happens when you let someone with adhd who is incapable of making a decision design something. You get 4 different versions of the same thing

And another for the brit kit. 
An LCT HK53, set up as the L101A1/2 RM Close protection variant. 
Can't afford a real trijicon RX06, so this AIMO reflex will have to do. 
 
Note to self.... this collection is getting out of hand now... 🤣

"I want a MP7"
"We have MP7 at home"
 
MP7 at home.

Lambda Defence with SD kit, Marayama and Archwick GBB's. On Vorsk 6 gas and using .2g BB's we get 340 FPS on the Lambda, 320 on the Archwick and 315 on the Marayama. The Lambda is the softest shooting and could do with some beefier bolt return springs and it's a bit underwhelming to fire. If you are after quality and performance then get the Archwick as it's outstanding. I tried it with 0.3g's and it had no issues lifting them and the hop still had more life in it and I think it probably could do 0.36g BB's out the box.
 
If the straight mag version is what you want, but on a budget, them Marayama are (or already have) releasing a straight mag version with the spare mags around £25 overseas which is about 1/2 the price of the Archwick mags but sadly I doubt they will be compatible between GBB's. 
Oh and the Lambda magwell is annoying as VFC and Raven mags can move forwards and backwards, sometimes releasing a little gas, which is a bit annoying. Some sticky backed foam inside the magwell will sort it.
 

New pew, replacement for my LM4D workhorse. Paired it with a PEQ15, 3x magnifier and RDS and finished it off with a Bifrost BT for flame fun.

My dad and I have a few between us

Yeah had to step away while my life exploded, imploded and then got stirred around in a soup of bullshit for a while. It's nice to know I was missed.

I like them all 😍
You've been quiet for a while, all good ?

My dad and I have a few between us

My dad and I have a few between us

My dad and I have a few between us

You posted this just before I was about to put an update on XD.  So originally I was trying to use the original mag and hide it inside the box mag which would have lead to a much larger box mag than reel steel. I was also considering chopping the mag in half and splicing it smaller until @The_Lord_Poncho Made a suggestion that had somehow entirely slipped my mind "3d print one" And so I have designed and printed a new bottom part using the top half of the original we magazine, no modification needed. To be clear this will be sent off to be machined or printed in metal before I use it but I have tested it by pumping it up very slightly with my hpa pump (while wearing safety glasses) and it does infact cycle the gun just fine though it leaks around the bolts even with o rings which a metal version will hopefully fix. Did also have to remove the paddle mag release to get the connector in a good spot. 
 


having it this short also opens up an interesting possibility. I think I am going to add onto the bottom of it a dovetail or something similar and while I will make a box mag to use I am also considering a magazine adapter for vietnam style short m4 mags. With the belt feed mechanism and a short length of dummy 7.62 the mag would be barely noticeable and id be able to run the gun without the need for a box mag. Obviously Id need to get myself a supply of vn midcaps which are hard as hell to come across right now but I think this could be a great way to use it. If anyone has any suggestion's for some other 100 or so round midcaps that would be small enough to not be noticeable Id appreciate any ideas.  

Also 3d printed a guide to mark out the holes on the handguard and started drilling and cutting them into some 40mm aluminum pipe. The raised ridges on the handguard will be 3d printed additions and all of the small holes are threaded for m5 bolts so I can swap the ridges out for rail sections and the offset foregrip when I get around to modeling and printing it. 
 

 

So a while ago I started to build a hk21e machinegun based on a jg g3 but the gun was a bit screwed and I made a bit of a hash of upgrading it so That rather killed my motivation for working on that. I recently sold off that gun as part of my process of swapping entirely to gbbrs. Having watched a few explosive enterprises vids I decided to give this another go. This time the base gun is a we gbb g3. It came to me with the barrel shortened and Ive just picked up a proper hk21e style clubfoot stock for it. Im planning to model and print most of the bits for it in plastic and then send them off to be done in aluminium when im finished. This is just the first step. 
 
1 new sight block that just sits on the cocking tube and dosent go down to the barrel. 
 
2 front handguard cap with a block hidden under it which bolts to the handguard pinhole to keep everything rigid
 
3 a sleeve to go over the barrel to give it the proper machinegun profile. I have sanded and painted this bit since the proper barrel is tapered and making one of these in metal would be a pain. will probably leave it plastic. It just screws onto the outer barrel nut and gets pinned in place by the flash hider.  

next up is to make the rear handguard cap and order some steel or aluminium tube to make the actual handguard. Ill be building a pinhole into the rear handguard cap where the belt feed mechanism attaches. This would normally be on the reciever instead of the magwell but Im trying to make this in a way which requires as little modification to the base gun as possible. Once the belt feed assembly is made ill be making a box mag to slot onto it, fitting the guts of a 249 box in there, hpa tapping the original mag and drilling a hole in the front for bbs to feed in from a spring tube. Im not really a fan of hpa but for a gbb lmg like this its simply the best option. 

I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.

I never liked the quad rails so I copied the Midwest Industries M-Lok rail

Have a LCT HK33.  As featured in the Thing 1983 (albeit the semi auto version) and its 2011 Prequel.

So I'm about 90% done on the design. still got to do some cosmetic stuff on the right side of the lower receiver and mess around with the mag catch some more but nearly done. (just a thought..if I make this, will this be the first ever UK build AEG?)

My TM saiga and TM akm