PopRocket123

My latest addition to the Eastern Bloc collection...... A cheeky little AK105

Garand Thumb inspired me to get divorced 

Personally I blame Explosive Enterprises and Garand Thumb 
 

Can you adopt me please? 

I was going to fork out for an LCT dog tail and the ugly keymod handguard... Then I remembered the Zenitco SPORT kits don't rely on the retainer so much. Had to cut out the bottom of the rail to accommodate the gas block (AK74/105 gas block sits more forwards and the sport kit has a hole already for it). Rail isn't very pretty due to countless games and abuse but it looks pretty good on the RPK if I say so myself 

What days aren’t you home? Asking for a friend 👀

Everyone needs a stupid project gun

Every time I think I have too many guns, I remember that @ButcherBill exists 😂

As many of you will know, I like to move my toys around every now and then... finding a place for my new URG-I was needed, my AR variants were a little unloved in the corner so centre stage they went (sorry AK's), I've ordered bits n bobs for the URG-I to trick it out (pics to follow) but OMG how skinny is it? I can actually imagine the GI's in VN thinking the first M16's were toys compared with the M14's they had previously.
Tried to keep my favourites & gameday pews prominant & easily accessible but I wanted to get them all on the wall so the G36's & Scar-L's aren't where I'd like them to be but a couple of 2 tones are hiding behind the rif's & I'm happy for now.
I have an UZI to pop on another wall but my 'tism' won't let me just put it in any gap so a bit of thought will be needed to get that in 'just the right place'.
 
p.s. the SL8/9 isn't in the right place but that's a move for another day.

Went the gen 1 MPX SD route for my APFG! Even got the gen 1 MPX upper trademarks 😎 Turned out lovely!

Wanted to make my WE Scar H mags look kinda like Lancer L7AWM’s - found a guy on Reddit who had previously talked about working on one, and got involved with testing it (and suggesting changes/improvements).
 
After about 50 hours total of printing I’ve now got 7 of these done successfully.

Just got a set of G&P externals, probably going to cannibalise another G&P to build it out into an SPR style rifle. Not a huge fan of the texturing on the stock and grip but you get used to it. The lower markings are very 2010s cringe. What I was really after was the URX 3.1 handguard but it also came with the iconic KAC golf ball effect dimpled barrel which is a vibe. And a 3d printed suppressor which looks fine from a few steps back and is actually lighter than the metal flash hider

Won't be getting run like this as you can't get the handguard off to access the battery when the muzzle-break the QD suppressor sits on is threaded but I thought it looked pretty neat. As much as I love the G36E with the bipod I think the G36K lengh is the goldilocks of the bunch - just right.

GBB, it's based on a VFC V2 with a silly lil twist...
 
It's a BASR!

Snap! AEG or GBBR? 1J or DMR? (mine is an MWS based DMR)
 

A pal gave me his handguard to build an upper for him so decided to build a clone of the kyle lamb rifle to try for a trade for a gun he has I want lol.. yea not working so will be getting pulled apart.
 
G&p a2 lower ,g&p upper , g&p outer and steel kac fh , g&p lipo tube / car15 stock. Is meant to have a g&p storm grip but didn't fit it. Systema gearbox with shs high torque motor , still needed bits doing to fully finish but don't think it looks to bad. 

Very nice. I have a 3.1 on my SR25k, which I would love to point you to but it looks like the website where I got it has disappeared! www.honortask.com in case it comes up again.

Just got a set of G&P externals, probably going to cannibalise another G&P to build it out into an SPR style rifle. Not a huge fan of the texturing on the stock and grip but you get used to it. The lower markings are very 2010s cringe. What I was really after was the URX 3.1 handguard but it also came with the iconic KAC golf ball effect dimpled barrel which is a vibe. And a 3d printed suppressor which looks fine from a few steps back and is actually lighter than the metal flash hider

Just got a set of G&P externals, probably going to cannibalise another G&P to build it out into an SPR style rifle. Not a huge fan of the texturing on the stock and grip but you get used to it. The lower markings are very 2010s cringe. What I was really after was the URX 3.1 handguard but it also came with the iconic KAC golf ball effect dimpled barrel which is a vibe. And a 3d printed suppressor which looks fine from a few steps back and is actually lighter than the metal flash hider

Just got a set of G&P externals, probably going to cannibalise another G&P to build it out into an SPR style rifle. Not a huge fan of the texturing on the stock and grip but you get used to it. The lower markings are very 2010s cringe. What I was really after was the URX 3.1 handguard but it also came with the iconic KAC golf ball effect dimpled barrel which is a vibe. And a 3d printed suppressor which looks fine from a few steps back and is actually lighter than the metal flash hider

It's a standard A1, they just act like deacs

Old TM M4s are pig bitch fucks and whoever thought adding those two tabs to the back of the upper was a good idea needs to have his hands cut off. But damn if it doesn't look good now that it's together. The 9mm mag is just because I don't have any stanags at the moment