BigBlackGlock

So, that makes number... 8? 😅

ｃｏｍｐｅｎｓａｔｉｎｇ

I had the Aim-O replicas and they were pretty good. The rear lens wasn't severely tinted and there was little to no ghosting, nor reflection. The ACM ones are absolute shite and are barely usable indoors, unless the room is lit by a million lights

I've only had mine for 4 days so I can't comment much unfortunately 😅 However, I have experienced the same issue before with different guns. As @Duff said, a good barrel clean and cleaning/inspecting the hop unit/rubber was the solution.

Maybe once he takes the job on 😅 Said he can do it but has not responded since, so I assume he has a few projects to do

Well, the kit arrived today and took about 3 minutes to install, no issues at all. It definitely ups the recoil and RoF, as expected! So far, I am very happy with it, it'll definitely be staying installed. The recoil now reminds me of my old GHK G5 with RATech steel bolt I will probably do some testing later to see how it impacts the gas efficiency, how much weight has been added to the bolt, etc Now, if you'll excuse me, I am going to go back to shooting it 😅

First part is here 😀 PTS Aluminium Masada rail

You, sir, are a legend! I spoke to him and he is willing to shorten it for me to my specs, at a fraction of the cost of what the CQB barrel costs! Thank you 😀

Hephaestus obviously doing something right 😅

I will let you know A friend of mine told me about it and said it absolutely transforms the gun. Somehow increases the recoil and RoF (to about 1000rpm) simultaneously. There is also a video on YouTube of the kit by Hephaestus if you are interested

Bits for upcoming PTS Masada build: - Elcan SpectreDR 1-4x - Mini red dot mount for the SpectreDR - Mini red dot for the mount for the SpectreDR (see the theme?) - 180mm x 30mm 14mm Ccw/Cw suppressor - Magpul PTS MOE RVG - Magpul PTS ranger plates (box of 10) - Hephaestus recoil kit for PTS Masada Still waiting for the PTS aluminium rail to arrive, should be here tomorrow. Probably a month for the rest of the stuff. and that concludes my spending for a while. Well, until I see something I want, I suppose. I have an addiction. Help.

Don't slam the stock into the fixed position and you will be fine. Just press the button (as you would when you are folding it) and put the stock back into place. Should be no issues that way. If it does break, at least you can use the stock as a boot.

Got a similar issue, don't fancy paying £125 for an outer barrel 🤐 Even then, this barrel is still about an inch too long for the project I have in mind... If you find a service, I will also be interested