deebo

They aren't RMP......they aren't....haha
 
Like jcheesright said, do t get a pistol unless its and rif. Some people (myself included) will drag out a pistol at any oppertunity, but the cool factor is all gone if its a bright colour and not tacticool.
 
Grab a combat machine and some second hand army gear, then wait till you ha e a defence and can buy proper stuff. Save in the meantime and by then you will have a better isea of what you really want to get/look like. This hobby breeds magpies so its easy to see something cool buy it and change your mind again lol

They aren't RMP......they aren't....haha
 
Like jcheesright said, do t get a pistol unless its and rif. Some people (myself included) will drag out a pistol at any oppertunity, but the cool factor is all gone if its a bright colour and not tacticool.
 
Grab a combat machine and some second hand army gear, then wait till you ha e a defence and can buy proper stuff. Save in the meantime and by then you will have a better isea of what you really want to get/look like. This hobby breeds magpies so its easy to see something cool buy it and change your mind again lol

Any of those starter packs would be ok.
 
Do yourself a favour and stop using the word gat it makes you sound like a chav.☺

Oh my gonads, where to begin...?
 
Probably first on my list is to finish the upgrading of Ekaterina my Gen 1 E&L AKS-74M - I have nearly all the bits:
PDI 6.05mm TBB, ProWin hop up chamber, double O-ring piston head, maybe PDI 100% spring depending on FPS from excellent compression, Prometheus Purple (soft) hop bucking + PTFE tape, SHS single O-ring air seal nozzle is already in, SHS High Speed motor, lo res rewire & Deans connectors, KK BW3 MOSFET, + might buy Kanzen ceramic bearings for the quiet & may adjust the gear ratio depending on how well the KK BW3 pre-cocking function works...
 
Need a new hop solution for Svetlana my spring A&K SVD:
she has a PDI 590x6.01mm TBB and the airsoftpro.cz advanced hop chamber; i was using a PDI W-hold bucking but it was really struggling to lift anything heavier than 0.32g so I tried a Maple Leaf 60° and a variety of 0.4+g ammo all of which was jamming in the hop chamber even with no hop applied; so i surrendered and replaced the W-hold, only to find that she was now jamming 0.3g Blaster Devils which had been my ammo of choice previously - i dunno what the problem is, so opinions would be appreciated (but i want to keep the 6.01mm TBB b/c high compression means weaker spring which makes for easier cocking from tiny & awkward cocking handle {even with the extension}), but anyway I have also bought...
 
...an AEG SVD by CYMA whom I am yet to name:
her stock FPS is supposed to be 440 but my local, Skirmish Mansfield, allow semi-locked guns to fire at up to 500FPS with 0.2g BB's same as BASR's (you just have to leave 1 second between shots), so I expect I'll put a 6.01mm PDI barrel in her to get the extra 60 & may have to trim the spring a bit because gunfire.pl claim her inner barrel is 690mm long, which i think must be an exaggeration, but if it isn't, holy extra compression mucking up standard FPS calculations batman! They also claim that CYMA's clone of Real Sword is so good that the stock compression is excellent, which is a claim i'll have to investigate and, whilst i am a fan of CYMA hop rubbers in AEG's, I'm not so sure they're good enough for sniping, nor is their QC up to much when it comes to hop rubbers, so i may well have to replace it due to bad moulding anyway. No doubt I'll also end up wanting lightning fast trigger response, which may well lead to a pre-cocking MOSFET, hopefully another BW3 because it would be such a waste of money to end up having to buy a BTC Chimera (which can also do ROF adjustment by inserting micro-pauses between full auto shots, rather than slowing the cycle rate) for a semi-auto only gun...
 
Then there's the new Meister Arms AKS-74UN I have just bought:
at some point during 2016 I'll name her and do to her pretty much the same as Ekaterina. except for the ProWin hop chamber which i only bought because it was going cheap 2nd hand (not that they aren't better than the TM compatible design, they are, but E&L and Meister Arms have already copied that design very well, even though it does then limit you to a 1200mAh 11.1V LiPo under the top cover, at least the extra space allows you to put a MOSFET handily on top of the hop chamber which makes it easier to get at to plug in Deans)...
 
...and the massive pile of partially dismantled AK's I have lurking in the back room:
of note Tatiana my AKS-47 needs a new gearbox inserting and her woodwork roughing up; Sabine my tactical AK-47 needs her GB un-jamming and a hand made FIMO ergonomic pistol grip; my franken-AK build needs completing and painting in snow camo; my Post-Apocalyptic/Terrorist AK-47/Type 56-1 hybrid needs her real steel stock fitting and a few internals; plus there's enough bits to make a couple of very good guns and a couple of bargain bin specials to sell...
 
Oh yeah, and there's also Raisa my tactical RPK build:
needs her Zenit style handguard internal file job completed and, oh weep for the heresy, possibly some kind of Crane stock, because i need extendible and can hold a battery, because the top cover is full of faux piston and bolt carrier, which will not come out and still allow the top cover to be latched in place at all easily, but i may experiment with some box section ali to make her existing stock extendible; plus she needs one of those grip-pods which split into 2 halves (rather than the ones which shoot the legs out of the bottom and look silly both open & closed even on L85A2's ); internally she needs the full Ian-stylee high compression/high cycle rate works, locking off to semi, and fettling for a UK-wide-ish DMR FPS of 420...
 
And how could i forget? I also need to finish Vázlav my Vz 61 upgrade:
from my bits pile he needs his SHS gears fitted; Kanzen bearings; Magnesium Alloy piston; 130% spring; and despite prevailing opinions and his PDI 6.01mm TBB, I am going to R-hop him (just to see); I also still live in hope of finding a neodymium magnet motor which will fit in his tiny gearbox...
 
Loadout wise i want to complete my Soviet era tank crew scruffy mixed uniform; add authentic leather jump boots to my Soviet-Afghan war era VDV loadout; build a dedicated Smersh to go with Raisa consisting of 1 side PKM for a drum mag, the other side RPK pouches for long box mags, and the butt-pack modified with an elasticated post box hole in the top as a dump pouch; finish my ghillie suit; get a Partizan/SS Leto Gorka for bad weather...
 
Also need to get my knee healed up so i can go to the gym and get fit again - I plan to be on form by March for the Balshoy Bolshevik Bash 4, but i expect to be fit for long range sniping quite soon...
 
I feel like i'm still missing something...

Not so much 2016 but I've just put a chopped down m170 vsr Spring and put in my old asg franchi 😂
It smarts a bit being shot with it, much to the wifes amusement... I had to cock it for herbal she couldn't
I can't see the trigger holding up too long lol

Not if it was a tenner pointless gimmick from my point of view.
Watching those muricans camping around trying to look all operator put me off even more. If I wanted to watch people standing around achieving nothing I would go watch some council workers doing road repairs.

Is that a duck in the manger or a rabbit?
 

Not really I spent all your money on Quality street and beer 😉
Merry Xmas 🎅
 
Only joking yeah all set. Will be collecting rest of fees end of January.
The mall is taking bookings for those that want to play Sunday so everybody needs to book in.

Like trig said it was a generalisation. And as sgttalbert said teir one have not helped themselves by making theres invite only. In their own words on the fb page they said most arent good enough for them and that they only want the best of the best....in airsoft....the game is mainly for fun, not training in case the chinese invade.
 
Dont insult people. Its a forum, not a schoolyard.
 
Back to topic! Milsims are great if you want to have more realism and objectives, and even the lesser ones are quite a charecter/fitness test. Just another flavour for airsoft. I enjoyed the simulation stuff, but i will definately keep skirmishing as well.

Guess your one of tiers "special" 20% then? 
Looking at your sig as well not overly shocked by your response.

I like the events where it's kit based so you aren't playing spot the armband as it's a horribly flawed way of denoting which team someone is on. There's also quite a lot of skirmish sites where it feels like the objectives for the day have been made up on the spot.
 
I'm not sure if I can be arsed to ever play through the weekend, although i'd be up for stuff where it's a full session saturday, then camping with another session on sunday.

He made a bit of a generalisation not something aimed at a particular person. You flat out insulted him maybe you need to look in a mirror?

Also Tier1 haven't helped themselves and the 'image' of Milsim by saying 80% of the players who turned up weren't good enough. Tier 1 is now invite only

Divorce your parents on the grounds of cruelty.

Monkey metal my mate reffered to it as. They claim aluminium, and that is the highest percentage, but then they top it up with odds and ends like brass, tin, iron or whatever. I imagine only the very high end weapons are actually proper metals if that makes sense.

Am I the only one looking forward to feb 27th more than xmas?

Thats funny your missus told me it was cqb at best. 
Apparently it breaks down pretty quickly as well.

I thought I had performed another miracle ???

Reason not to console game no. 241.
 

Sub machine guns, auto pistols and the like. Plenty of weapons she could get on with. My bro is disabled, has something similar to parkinsons. We took him and he loved it, everyone was really sound and made it really enjoyable for him. Like people have said, the problem is only as big as people make it, and as a rule i havent come across any one who is gonna make an issue or fun of anyone with a disability or problem. I would suggest cqb, just because of the nature of the guns i imagine she could use easily arent great for range, and nothing sucks worse then being out ranged by everyone lol

Not fussed. Thankful for just being able to go the one day thanks to you and your brother given the distances required.

Not for me and the little fella thanks. We are going up with proffrink, but if someone is able to bring him back sunday then he may or may not be in for the sunday game as well.
 
Not speaking for him though as not sure so he needs to comment himself lol

I am staying overnight and shall be attending the Sunday game. My weekend pass has been authorised by the Home General.

Holidays booked and paid for see you all in February.

My mock special purpose rifle, and my trade marked upgraded m&p9
 

Am tempted by some of these dusty paint jobs, they look great.