-
Posts
185 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by Mtemprell
-
-
Off topic a bit here. It goes to show that the s10 was make by the lowest bidder with how brittle the lenses are, it's not an old design but yet they didn't incorporate them. I had trust in this mask when in service and last thing on want while wearing it in a gas environment is for a bit of shrapnel or a fall or what ever to hit a lense and cracked or smash it thus breaking the air seal. Don't get me started on the gsr that's even worse build quality can see glue round the edges of the lense on them.
-
Right who one here has seen or done some stupid acts on the airsoft field?
I'll start.
Once had a lad who was sniping in full gillie suit and he thought the mesh on his hood would be sufficient enough for eye pro. Can safely say he was sent in for proper eye pro.
-
Hi I'm trying to sort my mates tm breacher out it had a load of gas leaks that I've now sorted but now I've noticed the front end the barrel and mag tube are slightly wobbly I've dismantled and checked all screws and they are all good and tight. Any ideas?
-
-
You may get away with it 9 times out of 10, but the plastic is definitely brittle, and the one time you get hosed at close range may be the time it gives up the ghost and not only cracks but then splinters, allowing the rest of the stream of BB's into your eyes.
Cheers. I'm glad I know that now. Used a gsr in airsoft too but had glasses on under it as I don't trust that flexible lense.
-
-
Can some one please tell me what this is worth.
Its a a&k m249 minimi para. I got the gun second hand prefitted with a 6.03 manual tight bore barrel and ec3 connectors with 11.1v lipos.
I know this is worth a lot less as the motor is broken. My guess is this was caused by the lipos as there's no mosfet fitted. Other than that the gun is in good nick.
-
-
Can I ask why the s10 lenses aren't any good? As I have shot mine with a 480fps sniper at a range of 5m and the BBC just bought ced of with no damage so I assumed they're good for airsoft.
-
Off topic here but how expensive would it work out to build a m4 from scratch using well known reliable parts?
-
-
-
I wouldn't bother with a g18 I'd go for a g17 instead. As I've heard the full auto can be hit and miss when it wears.
-
Is that a barret fitted with a 203?
-
I do like your m4. What is it?
-
-
Dude I don't want to come across a knob but I wouldn't wear rank tabs for airsofting. As people have had to work hard to earn right for that rank and a lot of people will not appreciate a civvy wearing that rank especially a officers rank slide.
Edit: but the whole load out does look good.- Jedi_Master and djben9
- 2
-
-
My we l85 is around 4.7 loaded and with susat.
-
-
I do like m4 platforms but I am a big bulpub fan, love my l85 gbb bot too common either with their higher price, also have a scar l which are fairly rare but the more common version of the scar. I might upgrade to a scar h and dmr it.
-
I recon it's a new buffer tube time. The current one will need cutting down and the access to screw is made. Then get a drill slightly bigger than the thread and drill head off then remove the thread with a pair of pliers. Only method I can think of.
-
Done what I've Done with my we kept it standard look with susat. I am not a fan of the Daniel defence rail look.
I just had a army armaments l85 as a project with a very similar problem I had to strip gearbox down and put in all new gear set with a motor pinion too shimmed up and upgraded the piston. I used shs components for it all. Works spot on now.
-
Or we gbb mp5
S10 Respirator/Gas Mask advice
in Guns, Gear & Loadouts
Posted
I thought that. Just myths me why the mod issue ballistic spec Goggles and glasses and skimp on the respirator