mintsauce5
-
Posts
160 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by mintsauce5
-
-
this is what i use with my sordins , with a seperate cable from the ptt into the back of the headset
-
I live a couple of miles from where this is going to be , be interesting to see how they’re going to set it up as it’s not really a very big area , well it wasn’t when the shops used to be up there anyway
-
the rule at the site i play at is that metal grenades have to be rolled knee height or lower and like you say not posted through windows or over barriers incase someones behind or under
- Shamal, RostokMcSpoons and _K4MF_
- 3
-
Hi ,
Theres fireball squadron at bassets pole near Sutton coldfield my regular site , walk on games are the first saturday of every month Airsoft Site | Fireball Squadron | Birmingham , theres also stormforce between Rugeley and Lichfield which is another good one Stormforce Airsoft
-
2 hours ago, Daveoc33 said:
Where do people go for original TM replacement parts? I'm trying to find a TM g18c frame but everywhere sells guarder or aftermarket frames, but nowhere sells TM ones. Or am I drawing a blank because of trademark issues? Cheers
If it’s the lower frame eagle 6 have one in stock
-
Fireball squadron at bassets pole behind the npf paintball site , walk on first Saturday of the month is a great site
-
On 26/07/2022 at 11:17, ak2m4 said:
Been testing this for the past 4 weeks and so far hasn't broken. It's a fully mechanical ETU with 4 micro-arms. I've always been a little sceptical of these type of FET's due to the unreliability of the switches but this one is proving pretty decent so far. I'm organising a small test of these with 10 or 20 regular players later this week, hopefully will see if they last the distance and how serviceable these are. Price should be around £35
Will update the thread with the findings.
do you need any more testers ? I’m just in the middle of a build that I’ve got a titan for but plans can change , Looks quite similar to the btc spectre -
2 hours ago, Tommikka said:
Is that current or old?
If current protect it at all costs and have it looked over
I had one many years ago and took forever to get around to seeing the doctor, I just in time for an infection to properly kick off
It’s a good few years ago that one , did go to the walk in nhs at the time though just to get it checked out
-
- Shamal and Skullchewer
- 1
- 1
-
West mids airsoft have a cqb site in rowley Regis
-
maybe you've tried this but you lever the opposite end as Lozart said and the pin goes flush
-
-
On 13/12/2021 at 09:57, ak2m4 said:
Stupid move by the retailer, honestly takes no time at all to contact the buyer and explain the issue. Any reason for not just using some SHS or Rocket 16:1 gears? They are generally pretty solid and half the price.
Hi ,
no particular reason really , I've just used them in a few of my guns and haven't had any problems , probably try some of the ones you've mentioned next time though I have heard good things about them
-
Recently ordered some parts from a well known retailer one thing was a set of ultimate 16.1 gears , had the delivery today and the gears i wanted had been substituted with a set of krytac enhanced torque 18.1 gears because the ultimate ones were out of stock with a sticker on the receipt saying that a substitution had been made , I've had substitute's from the likes of Asda and tesco's before but never from an airsoft retailer , normally get an email or phone call saying item out of stock do i want a refund or an alternative etc , my question is do i keep these gears in case i need some in the future as i only needed the spur gear to replace a faulty one from the ultimate gear set or do i go through the hassle of sending them back , I notice the krytac ones have a small spring on the spur gear shaft similar to the vfc self shimming ones which aren't supposed to be very good
-
-
how about these HSGI Replacement Bungee Kit Pack of 6 (tactical-kit.co.uk)
-
I know you’ve been steered away from mesh but have a look at heroshark’s mesh goggles , I’ve had dyei4’s , pyramex , even less than two months ago bought some Wiley x xl advanced glasses that cost a fair few £’s they look the mutts nuts but still fog up so back to mr sharks mesh , only been playing sine 2015 but always end up with mesh , had bb’s shatter once on the mesh but that was a hot gun
-
-
Probably something to do with the etu fitted on this gun , read a few posts a while ago saying the G&g etu’s aren’t much cop , did find this regarding the beep codes on another forum
G&G G2 BEEP CODES
So after a lot of searching I got in contact with G&G RMA tech and got a long awaited response about the G2 BEEP CODES. I've copy and pasted the email text below.
Hello, Thank you for contacting G&G Armament. If it beeps once per second, then it means low voltage. If it beeps continuously, then it means the motor couldn't pull the spring, either the GB is jammed, or the motor isn't strong enough. If it beeps twice a second, then it means the sector gear is at the wrong position.
I don't know if this information is already out there and I just couldn't find it, but I thought this might help some people who have had similar problems to me. Also these BEEP CODES seem to be impossible to decipher.
-
Hi , there’s an evo owners group on Facebook that’s great for most information you’ll need plus there’s a lad on there called Simon Moore who regarded as the guru when it comes to upgrades , with regards to jd’s upgrade package I had my bet done with the top upgrade package they do within the first twelve months it had to go back three times due to different things breaking , wether it was down to faulty parts or bad workmanship is open to debate but I wouldn’t ever go to jd for tech work on any of my rifs again , on a side note since the last time it was fixed it’s been fine and it’s definitely worth looking at upgrading the evo
-
Hi , I'm in the Walsall area , myself and a couple of other lads play at Fireball squadron at bassetts pole most months the walk on day is the first Saturday of every month , theres's also stormforce between Rugeley and Lichfield and west mids airsoft which are great sites , you'd be welcome to tag along with us one of the weekends if you like , we are going to Fireball on the 7th of November but I think its fully booked now
-
I'm thinking of selling this aeg not sure of what price to ask for it , build wise the upper and lower i believe is a hurricane hkm4d , rail is a noveske copy , pts pistol grip , internals are ultimate gearbox with ultimate 16.1 gears , piston , cylinder head , cylinder and nozzle , ultimate u35000 motor and a gate aster mosfet , the upper receiver has got a small notch out of it just at the front of the receiver but its not a crack previouse owner looks to have dremeled a section out for some reason
-
Hi all ,
I’ve got a tm g18c gbb pistol with a problem , the pistol fires fine on single shot but when switched to full auto it fires once and won’t fire again unless the slide is cocked and only one shot in full auto , pretty much no clue as to what the problem is as my knowledge of gbb pistols is limited to cleaning and lubing pretty much , anyone any idea what the problem may be ?
-
I’ve got a g&g lower knocking around somewhere I think if that’s what your looking for
Crye G3 trousers
in Appraisals
Posted
Hi ,
Thinking of selling these trousers not sure what to ask , they are Crye G3 trousers with the genuine knee pads , think they may have been dyed in the past as the multi cam pattern is darker than others I’ve looked at also the Velcro is a darker , they’ve been well used but plenty of life left in them