Mad-Al

My last game was a couple of weeks ago but i thought best sleep on it a bit before writing anything up. I'm not sure if it's just my local site but quality of play and of the individuals playing has taken a massive nose dive this year. We started our first game half an hour late as some people were too thick to hand in there waivers and it went downhill from there. First game i took a hit in tight area so i moved to oneside to allow the fire fight to continue as i didnt want to get in anyones way and impede the game, at this point the braindead halfwit that shot me decided to full auto me within MED despite already calling hit, having my hand up and not holding my gun. Next round was full of bad players not abiding by respawn rules and yelling at other players not to either. This round i stored my primary on top of a steel crate dead centre with no overhang after taking a hit when i went to collect i found it had been thrown on the flaw and parts had come off. Third game yet another delay in starting as some twats wouldnt shut up during the brief despite being repeatedly told to. Through the whole day i didn't see anything vaguely resembling teamwork on either side and any encouragement or attempt to organise people was met with contempt, a lot of cheating in not respawning correctly, alot of people over shooting, engaging within MED and just generally acting like dicks. Unfortunately this has been my experience every skirmish this year and has lead to my team investigating new sites. Last year the standards of play were much higher with kess cheating, more teamwork and overall less twats showing up. Part if me hopes that its just over enthusiasm from not being able to skirmish for a long while and people will settle back down and start obiding rules and stop being little shits as my experiences last year were nothing like this but honestly i saw a growing minority of just arse holes showing up and i don't have the time or patience for it.

Most of the noise on a gbbcomes from the bolt moving, no matter what can and barrel combo you usr it won't silence it just change the sound a bit. No outer barrel wobble. To lower fps there is always the NPAS or run it on abbey 144 that'll bring the power down nicely and npas will allow you to tweak for whatever field you want and make the gun more desirable should you decide to move it on. The MP5 is great fun and is skirmishable but i wouldnt have one as an only weapon, its fun as hell and performs reasonably well with the ml hop rubber and nub but if youre somewhere where you need more range and consistency then they're not the greatest but the burst fire makes it worth while. Heres a disassembly video that shows how the hop outer barrel etc fit together

WE apaches are really good, the externals are incredibly tough and will take anything you throw at them (literally). They perform well but get yourself a maple leaf hop rubber and omega nub in there as the stock rubbers are rubbish. Rate of fire isnt insane but given the limited mag capacity i honestly see that as a bonus. Internals are standard fare for WE, theyre okay and are cheap and easy to replace as an when they go with steel parts being available if desired. Barrels are decent and you'll get good enough range and consistency if you really need more then barrel changes are incredibly quick and easy in these and replacements are not expensive. Best hop unit ive ever used. For longevity as long as you arent spamming the 3 round burst then they are actually pretty damn good but as i said if anything does go wrong they are cheap and easy to fix. Mags are incredibly tight and the shape of them makes reloading them a slightly awkward experience. Why would you want to put in a shorter barrel? You can always stabalise the barrel inside the outer barrel with some wadding to stop it from moving but im not sure why you would want to? Performance wise the tm will be better in every way except recoil, the recoil on these is great.

Can you post the link for these please mate?

Ensure your gearbox is radiused and get yourself a well lock bracer. Not the most glamorous mods but will increase the longevity of your dmr.

Yep thats the one, my tech has been running one for over a year now with no issues. Just note that the sizes run small, im 33" waist and there is not much adjustment left in the medium for me. A little over £20

Cheap one for me today, ali express gunfighter belt. Seems well made enough.

My biggest bug bear with the we is all the weird cut outs on it, its not a mp7 but its so close its like they cut bits out to avoid pissing off HK but then they never normally let that stop them.

Bit of a project for me. Used we smg8 with 4x mags Good points: Freshly serviced by a trusted teck NPAS ML Monster rubber Steel stock catch Steel trigger set All magazines have gas route upgrades It was very cheap Bad points: Wrap is very call of duty Wrap is patchy (It was the previous owners first attempt) Bolt doesnt hold open So the following parts have been purchased as well: ML crazy jet 180mm barrel Replacement bolt carrier Replacement bolt hold open parts Krylon Nail varnish remover Rsa style sling point

I think this is finally in a state where i am happy to show it LCT G3A4 (DMRd to 430 fps, warfet, gearbox brace) Genuine Hensoldt 4x24 s2 (had 2 lense covers before some #%@£ng £%₩¥ decided to throw my rifle on the ground when i wasnt looking) Original hensoldt claw mount Aftermarket illuminator Cheapo rail Cyma kac grip Ali express kac rail cover Element llm01 (these suck!) Blue force vickers sling kryptek limited edition Genuine 7.62 magpul The pistol is my trusty KWA g19, these are indestructible this one was bought by my dad who used it in the garden a few times then left it in the loft for 10 + years until i took it out and it still worked! Since then its had a tbb, ml rubber and i key added and some custom work done on the hop. The shotty is my bargain double eagle springer.

I see you play in Billericay, me and a few mates go to AP every month. If youve seen a guy in full mtp with a boonie hat and a g3 thats me.

Its an asg scope, its cheap and nothing special. Youll struggle to find an optic these days that isnt light rain proof. As for anti fogging again not really an issue there no excuse for making an optic that fogs these days, of course there is "doesn't fog" and then there is the proper nitrogen filled anti fog and i will opt for the latter every single time. Most optics can take gbbr recoil without breaking the real issue is holding there zero. Alot of the time with scopes up to a certain point you get what you pay for especially when it comes to clarity, holding zero and general ruggedness. If you're going to use the gun this is attached to a lot I would hold off and get something a little more rugged which is likely to hold ots zero better like a holy warrior or vision king or even better than that if you can stump up the extra a vector.

Personally i would get a cyma or an e&c and spend the extra on a mosfet and getting a tech to look it over and the rest on gucci accessories like a decent optic, stock, rail and foregrip. You'll end up with something that will perform better than the more expensive stuff and be accessorised the way you like it for the same cost. Or as you already have an ar platform get yourself something completely different like a dmr or a LMG realistically if you have multiple ars then they will all end up being basically the same anyway.

I had this same question earlier and ended up going with a blue force gear vickers sling, real steel sling used by military and law enforcement around the world and even got a shout out on garand thumbs video on slings. Holds my LCT g3 fine and the padding is comfortable but not obstructive or sticky. I got mine from tactical-kit.co.uk and am very happy with it. The other main option is the slingster, i opted for the blue force as the padding seemed nicer. Both of these will be massive overkill for an NGRS which is a good thing as it means theres no chance of it breaking.

I love that paint job! Did you do it yourself?

My first attempt at painting a gnu ao be gentle with me: Cyma cm.002 Magpul rvg Magpul STR pts ergo grip Pts ASAP Magpul XDM x2 3x ali express KAC covers Pts ergo trigger gaurd Angry gun l119a2 charging handle Angry sf flash hider Surefake m600df with 45 degree mount Leupold mark 4 cq/t Vector Frenzy Nuprol N mag Cheap non mapul magpul

Have you looked at the army 1911s? Full metal and mostly marui compatible, better than the WE and possibly the cheapest gbb 1911 out there. The r28 kimber is on my shortlist. The co2 would be my choice for skirmishing as the gas capacity in a 1911 is aweful but for plinking the gbbs are just fine.

Yep the only issue is it came from taiwan gun so needs to be a part of a £140 order and youre risking UPS shipping which is as quick and reliable as an Austin princess.

No EBB is not even close to a full GBB experiance if you buy one under that premise then no matter what you get you will unfortunately end up disappointed. Have you tried boomarms.com? They have a couple of varients of the ghk ak in stock. I just checked and it appears they do ship R.I.F to Luxembourg.

Looks awesome with that lpvo!

Oh don't worry its only on there for the look, this was only bought as a garden plinker. Lockdown has left me with a couple of lengths of spaghetti instead of arms so i cant be pumping this bad boy in the field all day.

2 a shotgun and a sniper rifle

Placed a taiwan gun order 2 and a bit weeks ago, showed up 2 weeks later with no extra fees or issues.

No i get that alot but i hate the irons and i saw the GIGN MP5s with eothechs and compared to those this is positively beautiful! This is the only one ever ever seen but i think so.

Done