Leaderboard

*Checks if received any “careful now” reactions in past few days* Nope, defo gone missing 🤨

A little update..... I didnt get round to buying anything from the above thread. I had one of these kicking around, Viper mag rig So i got bored one night and found out that with a bit of slack the 7.62's would fit. But I hated all the bungee cord and the extra pistol pouches too so I got busy and chopped the mag pouches off, restrung the main pouches and voila! It now looks like this Sits nice an flush to my chest and also doesnt hardly affect the gun when slung in fromt of me. Anotjher view Another view The centre pouch is fairly rigid, would prolly fit an M4 in there at a a guess I also bought these The G2H G&G 400rnd mags are fairly small and they fit fine in all configurations The Skorpion style ones ive not fitted yet as i want to trial the mag rig 1st Cheepy fast mags on the belt, with the wings on to aid refitting

What has been the best/well thought out scenario you have played in ?

Hi all. Myself and a friend are looking to try Airsoft in Yorkshire in the new year. Could anyone give us recommendations for places to go try? Thanks in advance.

Looking for a price on this. Unfortunately due to COVID, breaking my wrist and some other bits this is no longer financially and ergonomically viable for me to use. Ordered in January, picked up early March. Has been used to marshal/test shot a few games inbetween the two lock downs, so probably about 1000rds through it at most. Front wired with a custom outer barrel. Internal Upgrades listed in photo. Included (everything in photo) AG warden with brake style muzzle. 9" custom milled barrel with 8" BCM mlok handguard. BCM mlok QD socket. Repro DBAL i2. Magpul MVG mlok. Repro Eotech. Magpul SL-K stock. 1x PTS EPM 4x Genuine NGRS Magazines 2x 1300mah Giant Power 7.4v lipo Acetech Charger All the internal spares and some external spares from the stock. Cheers.

Hit our local poundland for the epoxy. Guess how much? Yep correct.One British pound.amazballs! Blasted every thing off with easy start,not a speck of grease🙂. Stuck bushings in and now waiting for it to stick.Luverly 👍 Regards

Tough one again to appraise. Firstly ouch about your wrist.... Damn that must have bloody hurt!!! Now going back to the task at hand (pardon the pun), there are two schools of thought. Either try and sell as a compete package so 60-70% of total value. That may be more difficult to shift. Or part the rifle with the bare minimum which is one mag and sell the other accessories separately at 60%-70%. A bit of a ball ache but it’s another option. Bloody pucker build by the way!!!

The cold up north is making people a bit nuts We need some heat from the bbs o.O I will try the facebook group you linked and thanks for that. I did actually get so many o-rings with the kit but, since I am new to this, didn't really understand what to do with them. I haven't tested the air seal yet, I will do this very soon. Just wish i had a long barrel to try holding it to see how it feels You guys are welcome to join any time

i'd check you can get a spare for it before giving that a go, but the logic seems sound enough.

@Wild Weasel thanks for your help mate. A user which name is Matt Mills gave me an access on Google Drive. I think he was the author. Its nice to meet you guys. I will read the text , if I have any questions maybe I will disturb you one more time Have a nice day, greetings from Turkey/ Istanbul..

Self imposed airsoft exile 😐

is why bushings in gearboxes & metal rack on pistons are epoxy'd in pop into poundland, buy a cheap £1 syringey 2-part epoxy (wipe sides of box/bushings clean) squeeze out same amount 2 moderate size blobs mix with matchstick and smear a small amount on the inner rim of case push them in and leave to set for a few hours wipe off any excess & you should be able to set all 6 in one sitting if you move briskly (the epoxy tends to set within 5 mins) sorted not watched vid - got guests over but this cheap shit will do the job for a quid JB Weld is for more robust jobs, but just getting stuff to stay put well I use this quite often for bushings & piston racks (plus other stuff)

Do u reckon people should do Black Friday sales on the the forum marketplace 🧐 If so my gun is £120 collected this weekend that’s a saving of £10!! T&Cs apply* 😝😂

Me back in 2011

I am the captain now!

Schrodinger got its wrong. He said because the cat could be either dead or alive then it was sort of both. However there is only one true state of existence for a cat thats been sealed in a box: bloody furious

Don't...for some bizarre reason I tried explaining the concept to an 80 year old relative and she came to the conclusion that we're all the hype-aggressive types akin to Begbie from Transpotting (Scottish reference added for you).

If anybody is wondering about what bucking/nub combinations are good for the MWS, I have experience with four so far - the stock bucking, the Modify Tan + SixG brass nub, the Maple Leaf MR Hop (60 or 70 degree) + Maple Leaf Omega Tensioner/Modify flat nub, and the T-N.T. TR Hop bucking for GBB (60 degree) + Modify flat nub. Stock Bucking + nub: +Accurate to roughly 40 meters, 50 meters on a good non-windy day and if the target's torso is fully exposed +Doesn't seem to get dirty too quickly, easy to clean +/-Decently durable, but you're limited to under 120 MPS/400 FPS -Can lift up to 0.30's only - nub is too weak -Feels smooth, not as grippy as Maple Leaf buckings Modify Tan + SixG: +Very accurate out to 60 meters or so on 1.3 J, 0.30 - 0.36 G BB's (capable of lifting heavier BBs, up to 0.40, decent accuracy out to 70 meters - not sure about 0.45 or 0.48) +Drop in fit, no need to modify nub - the SixG nub is a good pairing with most buckings on the market +Works very well in cold weather -Not very durable -BBs often curve to either side at the end of travel, some lateral deviation observed -Limited to under 120 MPS/400 FPS, I would not go above 350 FPS in all honesty Maple Leaf MR Hop + Maple Leaf Omega Tensioner: +INSANE range, approx. 70-80 meters accurately with 0.40g and heavier BBs @approx. 2.0 J and above +Very grippy bucking, decently durable, makes a great seal with the nozzle +Consistent FPS +Lateral deviation is noticeably less than Modify Tan/SixG combo -Omega Tensioner needs to be cut at the front and needs to be perfectly aligned or else your gun will shoot way off -MR Hop bucking gets dirty quickly due to how grippy it is and is a pain to get squeaky clean (you'll need to strip and clean your bucking/barrel after every game day) -Very strange issue - has no trouble lazing BBs on semi-auto, but BBs will fall out of the barrel on full auto T-N.T. TR Hop 60 degree + Modify Flat Nub OR T-N.T. standard flat nub: +Not as much range as MR Hop but even better consistency due to shape of patch, insanely accurate (it outranged most AEGs and I was able to score several cross-map kills) +Almost 0 lateral deviation +Doesn't get dirty as quickly, very easy to clean -Need to cut off front of nub in order to fit inside hop chamber -Needs teflon tape to seal better and prevent rotation of inner barrel inside hop chamber due to the bucking retaining edge being a bit thin - took more work to get this one right than the other combos In close to medium range testing (placing shots at roughly 30-40 meters onto a large postcard sized target, about 8x10 inches), the Modify tan combination and the T-N.T. bucking are the most accurate, though at under 30 meters the difference is negligible across all the combinations I've tried and the stock bucking is more than adequate for hitting targets at this range. The main issue I faced with the stock nub and bucking was that it could not lift 0.30s very far unless I was shooting over 1.5 J. In addition, after a while of shooting I noticed a lot of horizontal deviation. I could literally see my BBs making sidespins down to their target and it was getting difficult to thread BBs through small openings. However, past 100 feet is where the MR Hop and the T-N.T. buckings really shine. The MR Hop and the TNT buckings are on another level. The consistency of the T-N.T. from 30-60 meters is better than that of the MR Hop. The MR Hop is a little bit more "grippy." The T-N.T. seems to run cleaner. Both can send 0.40-0.45's out to 250 feet easily. The main issue with the Modify Tan bucking is that it's rated only at 50-60 degree and is not as durable as the TNT or Maple Leaf MR hop bucking. It also has more lateral deviation at long range than the MR Hop or the TNT bucking. There are numerous reports of people's Modify Tan buckings ripping from normal use. I don't see that happening anytime soon with my MR Hop bucking or my T-N.T. buckings. Apologies for the long post. This is just my experience and results may vary from setup to setup.