Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Emergencychimps
    As others have said, turn the belt around. Drop the height of the plate carrier a touch and Look into dangler style pouches, some of them are rather larger and/or groin protectors which hang down from the front of the plate carrier. As a "larger" man myself I've found 2 options. 1. Dangler pouches on the front. 2. Wearing field shirts rather than ubacs/combat shirts. They're a little less fitted/tight around the belly. Personally, I find those belts too big to be comfortable, so I prefer the inner belt with a small outer molle on. However clones of cryes mrb are a good compromise. If you are going to stick with that belt, I'd suggest a set of braces/shoulder harness for it that would go under your plate carrier. It doesn't look like you have anything attached to that belt.....so if be inclined to ditch it altogether. As it looks like you're a righty, I'd probably move the mag pouch from under your right arm to as far forward on your left side as I could. My experience is both looks based and I'm not a fan of those stinging belly shots.
  3.    Austeyr reacted to a post in a topic: Loadout advice (belt mostly)
  4. HELIflipper03

    Time Left: 6 days and 23 hours

    • SALE OR SWAP
    • NEW

    Completely unused, includes 4 fully functional mid-caps. No original box, so collection near Milton Keynes preferred or can attempt to box it up as best as possible. Looking for a Kriss Vector for swaps or cash either way .

    300.00 GBP

    Milton Keynes - GB

  5.    Enid_Puceflange reacted to a post in a topic: Macks airsoft dreamers of the week thread
  6. Today
  7. Jaylordofwaargh
    Yeah, this makes the cut, also welcome to the show
  8. Calblay
    Calblay joined the community
  9.    HZR13 reacted to a post in a topic: Loadout advice (belt mostly)
  10.    HZR13 reacted to a post in a topic: Loadout advice (belt mostly)
  11. greenfingers
    greenfingers joined the community
  12. CRTHayes

    P* kythera dmr

    CRTHayes posted an advert in HPA

    Time Left: 6 days and 22 hours

    • FOR SALE
    • USED

    Selling a polarstar kythera dmr fully upgraded, started life as a Cyma platinum 308 and has seen some changes 😂 ugs stock makes using hpa more convenient, no more pesky likes and bottles on your back, just plug and play, regulator included in the stock to change fps before game day. upgraded with a silent industries hop unit, best on the market imo theta optics 6-24x scope for those long range kills 5 mid cap metal mags 2 plastic battle axe style mid caps all in all an absolute gem and a very reluctant sale but I need a holiday 😂 message for more details collection very much preferred but can post at buyers expense

    500.00 GBP

    - GB

  13. Darkmikey22
    Have pm'd you a fee times, no reply.
  14. Doobie
    Doobie joined the community
  15. Enid_Puceflange
    You do whatever is most comfortable for you bud! I think the clips on the bottom front of your plate carrier are probably for a dangler pouch, to carry more stuff in (and a bit of tummy protection) I used to use one of those belts, to hold a dump pouch and an extra mag pouch or two, but wore it with the buckle to the front with a harness to support it over my shoulders. I’ve moved over to one of the two part belts, and have found it far nicer to have moved a bit of weight to my hips, (they are very rigid and have little to no “sagging” or drop when you fit them properly) and not my upper where the weight is supported by my shoulders and then my back, allowing me to lighten my PC a touch (helping reduce back pain)
  16. Lyndication
    The wide bit goes at the back, those connectors are for if you're running a shoulder harness. (Like the ol' PLCE). You don't to fill the front of a belt, it gets in the way of crouching and going prone. That wide bit lets you attach larger pouches for heavier stuff, like water bottles, gas bottles, and HPA tanks. Oh and note on fitting the plate carrier. The top of it should be in line with your collarbone. The bottom will end up slightly below your ribs, ideally. The idea is to cover your ribcage cos that's where your most important squishy bits are.
  17. Punisher3990
    If its around the other way none of the molle is accessible so I assumed this is the way its meant to go since the connectors line up with the straps under the mag holders perfectly.
  18.    Anonymoose reacted to a post in a topic: Loadout advice (belt mostly)
  19. Lyndication
    Why's the belt on backwards?
  20. Lyndication
    If you read the article, he didn't purchase a rif, and he didn't use Just Cos. He bought a two tone and painted it. He's underage to have a legal defense to buy RIFs.
  21. fatih
    fatih joined the community
  22.    PopRocket123 reacted to a post in a topic: Gun picture thread
  23.    Chai. reacted to a post in a topic: Recommended groin protection?
  24.    Chai. reacted to a post in a topic: Recommended groin protection?
  25.    Darkmikey22 reacted to a post in a topic: Gun picture thread
  26.    John_W reacted to a post in a topic: More blank firers being banned.
  27. hunter511
    For me letting bellends like this purchase RIFs is exactly why Just-Cos shouldn't exist https://www.bbc.co.uk/news/articles/cqxzjlj27w8o
  28. Punisher3990
    Good morning all, So, I am new to airsoft and have been slowly buying my gear. I have been getter cheaper stuff as per advice given. Mostly VIPER or KOMBAT stuff. Here's a pic of me in most of it so my reason for the post is the belt mainly. I went for this Viper battle belt as it does a good job of hiding/keeping the belly in (lol) but I notice that most people use a belt with the velco inner. Would I be better off using one of those and then just having a hanging piece where the belt currently is? Or is my current load out good? Also any tips on my gear? is it decent? (I have lowered the PC after this image as I realised it was a bit high)(the belt also now has a holster, pistol mags and a couple.of rifle mags on it, it isnt just empty lol)
  29. AbsoluteHeresy13

    Time Left: 6 days and 18 hours

    • WANTED
    • USED

    Wanted TM AKM/AKX ideally with hpa adapter

    123.00 GBP

    Chesterfield - GB

  30. Nickolai

    Time Left: 6 days and 18 hours

    • FOR SALE
    • NEW

    Brand New G&G ESG B-10 Gas Shotgun Never used, comes with box and manual. CNC and hard anodised aluminium hand guard comes with M-Lok slots either side of the front rail that gives you flexability to mount accessories. The lower hand guard can be removed and reveal the picatinny rail for a virtical drip or grenade launcher. • Gas Powered Airsoft Shotgun • 5 and 10 Burst Select Fire • Compatible with AEG M4 Magazines • Aluminum and Polymer Constuction • Bullpup Design with Internal Gas Reservoir £250 + postage. Open to offers. PM me for more information.

    250.00 GBP

    - GB

  31. Nickolai

    Time Left: 6 days and 18 hours

    • FOR SALE
    • USED

    Sig Sauer ProForce MPX AEG Rifle Mint condition in box. Used but like new. Small marks but nothing much. Authentic Sig Sauer. This SMG is built like a tank, sporting full metal construction and precision CNC machining across its externals and flawlessly realistic SIG trademarks, and is pre-wired with a basic MOSFET to keep its trigger contacts protected as you lay down rapid semi-auto shots in CQB, in the MPX’s natural habitat. • Adjustable Hop-Up • Telescopic & Folding Stock • Semi and Full Auto Fire Modes • M-LOK Front Rail System • 100 Round Mid-Capacity Magazine (BB Speed loader included) £300 + postage. Open to offers. PM me for more information.

    300.00 GBP

  32. drgrzly

    Time Left: 6 days and 14 hours

    • FOR SALE
    • USED

    Selling another one of these beauties. This one comes with a 8'' mlok handguard installed. It has been fully upgraded to offer top performance. Most of the parts are brand new. Chrono 1-1.05J. Here what's inside: Gate Aster 2 Bluetooth ETU Gate 13:1 Gears Warhead Brushless Motor 27K Rocket Airsoft Gearbox Anti Reversal Latch V2 V3 X 1 FPS Airsoft Carbon Fibre Reinforced Tappet Plate V2 X 1 FPS Airsoft Stainless Steel Cylinder AEG Inner Barrel Type A - Type F X 1 Size: Type B - 201-250mm FPS Airsoft Gearbox Zero-Shock Light Weight Piston Full Rack X 1 FPS Airsoft Gearbox Urepan Ergal V2 Cylinder Head X 1 FPS Airsoft Gearbox Advanced Ergal Piston Head CNC Double O-Ring X 1 Rocket Airsoft Gearbox 8mm Bushings CNC Machined X 1 FPS Airsoft POM CNC Air Nozzle With O-Ring M4 / M16 21.2mm X 1 Laylax Prometheus Stainless Steel 6.03 Inner Barrel Wide Window (custom cut to 21cm) 4UAD Friction Pro Bucking and nub Laylax M100 Spring Externals include Brand new Sig Sauer Romeo 5 Gen II Defnac laser/light unit (green laser + 450 lumen torch) Surefire M300 on mlok mount Modbutton BCM mlok covers PTS QD Sling Attachment Aluminum Foregrip Sig Minimalist Mini Folding Stock PTS EPG Pistol Grip Angel Hive Metal Suppressor filled with foam Laylax Battery Protector Lancer coupler for magazines Extras included 1400mah 11.1 Lipo Battery that fits inside the handguard (clean look) Extra magazine (total 2) Original Motor Tested up to .32bb and it shoots lasers. Worth over 1.3K, selling for £1000, Includes shipment if needed. If you don't need the sight, then price is £930. Collection is in NW6 London. I rather you collect the replica so you can see it, but if you want it shipped, payment is only through bank transfer.

    930.00 GBP

    London - GB

  33. EDcase
    Oooh Nice! Did you get it from Octagon?
  34. Yesterday
  35. danny959
    danny959 joined the community
  36. Manchester homes
    Manchester homes joined the community
  37. DrabCam
    DrabCam joined the community
  38. 1st commando
    The correct scope is being made by EG with the mount and acro in FDE. The AG suppressor still looks better than the vfc one from pics but I'll directly compare them once the vfc suppressor lands later this month . UKSF versions do have some other optic and furniture options if you don't fancy the ranger/RM options
  39. Loki7491

    Time Left: 6 days and 10 hours

    • WANTED
    • NEW

    As per the title. Looking for a lefthanded holster for a Walther P99. Ideally opened bottomed to accept the suppressor, but I'll take what I can get.

    1,234.00 GBP

  40. Darkmikey22
    Thanks bud. No, they're completely stock. Trouble is, when the collection becomes as big as it has. I tend not to run them. I have a separate rifle and pistol for that. Plus buying boneyard (although still not cheap) makes the collection more achievable. Plus I tend to focus more on external accuracy then internal. A better pick of all the family together.....
  41. Anonymoose
    The AR design has kinda been done to death and people make a huge fuss over "new" AR-based stuff that looks exactly like every other one. I like my 416 but it does look like every other AR. But i do kinda like this. Not bothered about the L403 specifically, but i like the KS-1 dressed up like that with the foregrip and suppressor, etc. I'd rather have a black one over the FDE though. I do like an A1 triangular foregrip.
  42. patrykj26
    yes everything's stock. when i took it apart last time i did see some light marking on the piston as you've said. what would you suggest i should do to prevent that from happening to the new one if i replace it?
  43. Punisher3990

    Time Left: 6 days and 10 hours

    • WANTED
    • USED

    Hey all, I am looking for a set of the Vorsk VP-X Punisher Pistols (Black and Silver). These are more for a personal project of mine than skirmishing, so they don't necessarily need to be working, BUT ideally in good condition externally. I am a huge Punisher fan and want to recreate the display case these guns are in in the 2004 Punisher Movie. I understand these Vorsk pistols are not that popular for some reason so I am not expecting alot of messages. Please send me an offer. Please note, I am not going to be paying retail prices, so don't bother sending anything ridiculous

    1,234.00 GBP

  44. shaun b

    CYMA MP5 SD parts

    shaun b commented on Azreal's advert in Parts

    Hi is it a metal receiver.
  45. Lyndication

    Time Left: 6 days and 9 hours

    • FOR SALE
    • USED

    Having a clearout, if anyone wants any of this. 1. Amomax CZ75 Holster, £10 2. M16 Collapsing Stock, £12 3. M16 S&W Style Stock, £12 4. Flip-Up Lens Protector, £4 5. SVD Cheek Rest, £8 6. VFC MP7 Foregrip,£8 7. 16mm CW .50 Cal Muzzle Brake, £6 8. Mk12 Style Muzzle Brake, £6 9. 30mm Flip-to-Side Magnifier Mount, £10 10. LCT HK33 Handguard, £20 Plus £3 postage. Can work out deals for multiple items.

    Ask for price

  1. Load more activity
×
×
  • Create New...