1st commando Posted September 11 Posted September 11 12 hours ago, Gunboat Diplomat said: Have you any experience of an MWS to compare it to? I've been swinging back and forth on buying a V3 VFC for a while, but Jaeger Precisions latest range test of them vs MWS shows suggests they are still not there in terms of accuracy. If this latest revision of their hop can close that gap I'd be interested to know. I've had both mws and vfc rifles among other gbb platforms. I've since sold all my mws rifles and kept buying vfc . I've not had an issue with accuracy and certainly nothing that couldn't be solved by a new hop rubber if I couldn't be bothered to wear in the stock hop Gunboat Diplomat and Austeyr 1 1
Popular Post ButcherBill Posted September 11 Popular Post Posted September 11 (edited) Been waiting on this all day... This thing has a kick & I'm extremely pleased with it, the stocks a bit wobbly but planning on replacing it anyway (along with the grip). This was on pre-order (from the day I posted my weakness) & arrived by DPD today. Edited September 11 by ButcherBill Barny, JimFromHorsham, HZR13 and 2 others 3 2
ButcherBill Posted September 11 Posted September 11 I was wondering about that, the allen key doesn't seem to fit the npas tho (assuming it's just for the hop).
1st commando Posted Monday at 09:09 Posted Monday at 09:09 On 11/09/2025 at 17:00, ButcherBill said: I was wondering about that, the allen key doesn't seem to fit the npas tho (assuming it's just for the hop). The key in the box is for the hop ButcherBill 1
ButcherBill Posted Tuesday at 17:30 Posted Tuesday at 17:30 On 15/09/2025 at 10:09, 1st commando said: The key in the box is for the hop Yeah, I guessed as much.
Lyndication Posted Tuesday at 18:49 Posted Tuesday at 18:49 1.5mm hex key for the NPAS. It'll probably benefit from heavier BBs than .25s as well ButcherBill 1
Jacket Posted Wednesday at 17:54 Posted Wednesday at 17:54 Anyone else got one for going around corners? Gunner91, EvilMonkee, Lyndication and 5 others 8
Diemaco Posted Wednesday at 18:25 Posted Wednesday at 18:25 31 minutes ago, Jacket said: Anyone else got one for going around corners? What happened to it?
ButcherBill Posted Wednesday at 18:29 Posted Wednesday at 18:29 (edited) Ouch. Looks like you need one of those barrel wrenches that aren't available yet. Edited Wednesday at 18:30 by ButcherBill
Jacket Posted Wednesday at 18:38 Posted Wednesday at 18:38 Yep, definitely hasn’t happened in transit as packaging is unmarked. Must be a CQ issue, I think Stevie Wonder was on that day Outer barrel is central to the rail, it’s all on the piss HZR13, ButcherBill and Diemaco 3
hitmanNo2 Posted Wednesday at 19:39 Posted Wednesday at 19:39 Oh dear. What retailer did that come from?
Jacket Posted Wednesday at 19:48 Posted Wednesday at 19:48 Not sure, it was bought from here! Austeyr and Cannonfodder 2
ButcherBill Posted yesterday at 16:28 Posted yesterday at 16:28 Then I hope you've spoken to the seller & paid using paypal? Cannonfodder, HZR13 and Austeyr 3
Jacket Posted yesterday at 18:04 Posted yesterday at 18:04 1 hour ago, ButcherBill said: Then I hope you've spoken to the seller & paid using paypal? Yep, sent back today. Paid with G&S, seller said they will refund + postage cost when it arrives back. Pretty bad luck, looks like the barrel nut was cross threaded onto the receiver. Never seen a barrel that wonky, even my first TM M16VN in 1997 wasn’t that bad! ButcherBill 1
ButcherBill Posted yesterday at 18:23 Posted yesterday at 18:23 18 minutes ago, Jacket said: Yep, sent back today. Paid with G&S, seller said they will refund + postage cost when it arrives back. Pretty bad luck, looks like the barrel nut was cross threaded onto the receiver. Never seen a barrel that wonky, even my first TM M16VN in 1997 wasn’t that bad! Bet it was cross threaded because the proper tool isn't available yet and 'someone' likes to fiddle. EvilMonkee 1
ButcherBill Posted yesterday at 18:45 Posted yesterday at 18:45 I'm struggling to get more than 15 bb's in the mag, is it just bedding in?
Jacket Posted yesterday at 19:42 Posted yesterday at 19:42 1 hour ago, ButcherBill said: Bet it was cross threaded because the proper tool isn't available yet and 'someone' likes to fiddle. Honestly don’t think it has been touched at all. If it had been tinkered with, without the VFC tool, I think there would have been scratches all over it. Pretty sure a QC issue from the factory, but how it could have got out being that wonky is beyond me! ButcherBill 1
hitmanNo2 Posted yesterday at 20:35 Posted yesterday at 20:35 VFC have clearly hired ex GHK QC staff 😄 Schadenfreude34, Enid_Puceflange, TheFull9 and 1 other 2 2
Lyndication Posted yesterday at 21:00 Posted yesterday at 21:00 2 hours ago, ButcherBill said: I'm struggling to get more than 15 bb's in the mag, is it just bedding in? The VMags have a feed track that's too narrow, and you need to butcher it a bit to allow the BBs to stack properly. ButcherBill 1
Wavey_Gravey Posted 12 hours ago Posted 12 hours ago 12 hours ago, Lyndication said: The VMags have a feed track that's too narrow, and you need to butcher it a bit to allow the BBs to stack properly. Same with the STANAGs or just the V’s? I can get 18 in mine before the speed loader shits itself.
Lyndication Posted 12 hours ago Posted 12 hours ago Stanags are fine, it's just a weird issue with the Vmags. Wavey_Gravey 1
Wavey_Gravey Posted 12 hours ago Posted 12 hours ago Good to know, thanks. Will be picking up a bunch of those for another rifle so will come in handy.
ButcherBill Posted 5 hours ago Posted 5 hours ago 6 hours ago, Wavey_Gravey said: Good to know, thanks. Will be picking up a bunch of those for another rifle so will come in handy. There are some for sale in the classifieds
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now