Popular Post Stevobeavo Posted February 19, 2022 Popular Post Share Posted February 19, 2022 (edited) So I managed to put a few rounds through the gun at work today. It uses the same gearbox as all the other DE guns with the falcon system. At about 10/15m I was getting a grouping of around 2" or so (using valken .20g outside. I then shot at sign about 30/35m maybe which was about a foot square and after adjusting for wind I was hitting it pretty consistent. The gun feels very solid. No creeks anywhere. The only part that has a bit of movement is the stock when extended half way or more but even then it's not that much. I thought I'd highlight a few bits that might be useful and nice touches. First up is the battery compartment. It's pretty airy in there, especially if your a fellow 904G owner. as you can see plenty of room for larger sticks or crane batteries.b The stock has 6 extendable positions plus a couple for the cheek rest. It has a nice rubber pad at the end. A little detail that I thought was nice was a window to show what position the stock was in. The charging handle is ambidextrous and can be swapped over easily. You pull the charging handle back along 2 sprung loaded stainless steel tubes too access the hope unit. Hop now exposed through the large ejection window. This stays open until you press the catch and it snaps shut. Next is the grip. Feels good in the hand. Has a nice rubber texture on it. Definitely more comfortable than my 904G and H. Lastly one slight downside. The stock when folded doesn't click into anything to make it stay fully closed to the rifles body. There's a bit of free play before force is needed to fold it back to lock it out. Easily solved with a bit of velcro, or something. This is the amount 'free play' Hope that helps someone. Edited February 20, 2022 by Stevobeavo John_W, ak2m4, Akuma121 and 3 others 4 2 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted February 19, 2022 Share Posted February 19, 2022 Interesting. I've been looking at these. The lack of magazine options has put me off, I just need a hi-cap or two (or even a drum mag) and a bag of BB's to play these days and it seems only mid-caps are available at the moment. I wonder if it's compatible with G&G PCC45 mags? Otherwise, at half the cost of a G&G PCC45 and this a better looking gun (IMO), i think DE is onto a winner here. Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted February 19, 2022 Share Posted February 19, 2022 Yeah that's really nice. I like everything about my M906C, short of the small battery space (the circular tube only good enough for ~170mm long and 20mm diameter batteries), and the fact the spring was made out of chicken wire, so I'm an easy sale for another DE gun. I really like the look of this, and I'm glad to hear it's impressive so far... I too am concerned about the mags though. Being logical I really need to stick to STANAG types as that's what I've already got, and my belt rig is set up for them too... so if I get a second DE it might well be one of these instead: https://www.patrolbase.co.uk/double-eagle-m916g-utr556?pv=17877 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted February 19, 2022 Share Posted February 19, 2022 9 minutes ago, RostokMcSpoons said: I really like the look of this, and I'm glad to hear it's impressive so far... I too am concerned about the mags though. Being logical I really need to stick to STANAG types as that's what I've already got, and my belt rig is set up for them too... so if I get a second DE it might well be one of these instead: https://www.patrolbase.co.uk/double-eagle-m916g-utr556?pv=17877 Can't make my mind up between a DE UTR556 or an ICS CXP-16. I know ICS really well, but I am tempted to jump on the Double Eagle train just because I keep hearing good things about them. Link to comment Share on other sites More sharing options...
Stevobeavo Posted February 20, 2022 Author Share Posted February 20, 2022 2 hours ago, Speedbird_666 said: Interesting. I've been looking at these. The lack of magazine options has put me off, I just need a hi-cap or two (or even a drum mag) and a bag of BB's to play these days and it seems only mid-caps are available at the moment. I wonder if it's compatible with G&G PCC45 mags? Otherwise, at half the cost of a G&G PCC45 and this a better looking gun (IMO), i think DE is onto a winner here. I believe hi caps will be available in the future. But I'm pretty sure no other mags will work in this gun. That's according to the description I've read on TG. But maybe one could be lightly modified to work. 2 hours ago, RostokMcSpoons said: Yeah that's really nice. I like everything about my M906C, short of the small battery space (the circular tube only good enough for ~170mm long and 20mm diameter batteries), and the fact the spring was made out of chicken wire, so I'm an easy sale for another DE gun. I really like the look of this, and I'm glad to hear it's impressive so far... I too am concerned about the mags though. Being logical I really need to stick to STANAG types as that's what I've already got, and my belt rig is set up for them too... so if I get a second DE it might well be one of these instead: https://www.patrolbase.co.uk/double-eagle-m916g-utr556?pv=17877 Well as I've already got 2 DE m4 plus a shitna arms edge M4 (that's never worked) I thought I'd try a different platform. I'm not too fussed about different mag types. Takes a minute to swap over pouches on a belt lol. RostokMcSpoons 1 Link to comment Share on other sites More sharing options...
Fatboy40 Posted February 20, 2022 Share Posted February 20, 2022 15 hours ago, RostokMcSpoons said: Yeah that's really nice. I like everything about my M906C, short of the small battery space (the circular tube only good enough for ~170mm long and 20mm diameter batteries)... A PTS EPS stock is the perfect solution, you can fit anything then, you could run a Titan 6000mAh 11.1v Crane battery if you wanted to. Back onto the topic though it does cosmetically look like a very nice rifle, but it's begging to be front wired so the stock could be a little better 👍 RostokMcSpoons 1 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted February 20, 2022 Share Posted February 20, 2022 (edited) 23 minutes ago, Fatboy40 said: A PTS EPS stock is the perfect solution, you can fit anything then, you could run a Titan 6000mAh 11.1v Crane battery if you wanted to. I got one (The EPS that is. And a Titan 11.1v 3000mAH nunchuck for it and the F2000. Edited February 20, 2022 by RostokMcSpoons Link to comment Share on other sites More sharing options...
Stevobeavo Posted February 20, 2022 Author Share Posted February 20, 2022 2 hours ago, Fatboy40 said: Back onto the topic though it does cosmetically look like a very nice rifle, but it's begging to be front wired so the stock could be a little better 👍 There is a picture floating about with a skeleton style stock but if it is released I've read it won't be until at least 6 months time. I personally really like the stock. It's wrong in a good way I think 😃. Fatboy40 and RostokMcSpoons 2 Link to comment Share on other sites More sharing options...
BigAl Posted February 21, 2022 Share Posted February 21, 2022 (edited) Mags look like UMP mags, same as the g&g pcc45. Would make sense as the DE UMP was a G&g clone. Edited February 21, 2022 by BigAl Link to comment Share on other sites More sharing options...
Speedbird_666 Posted February 21, 2022 Share Posted February 21, 2022 8 hours ago, BigAl said: Mags look like UMP mags, same as the g&g pcc45. Would make sense as the DE UMP was a G&g clone. G&G PCC45 mags *look* like UMP mags, but they are absolutely not. The mag feed tube exits differently on top so they cannot interface with the hop unit - there is no cross-compatibility between the PCC45 and G&Gs own UMP(G). DE/G&G UMP: DE UTR 45: G&G PCC45: All mags are pictured in the same orientation (front closest) off patrolbase's product pages. Not convinced that PCC45 mags will work in the UTR45 either, there seems to be subtle geometry differences in the feed tube sizing an position. Link to comment Share on other sites More sharing options...
BigAl Posted February 21, 2022 Share Posted February 21, 2022 Was told the G&G PCC45 was compatible with there ump mags. Guess I was told wrong, shame I've got a few G&G UMP Mags so where. Link to comment Share on other sites More sharing options...
Stevobeavo Posted February 21, 2022 Author Share Posted February 21, 2022 (edited) They are probably compatible with double eagles older m89A ump 45. https://www.patrolbase.co.uk/double-eagle-m89a-umg-submachine-gun-hi-cap-magazine Added some accessories to the gun. Red dot from my 904G. Suppressor is the factory one from the 904H hence why it's so long. Edited February 21, 2022 by Stevobeavo RostokMcSpoons 1 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted February 22, 2022 Share Posted February 22, 2022 12 hours ago, Stevobeavo said: They are probably compatible with double eagles older m89A ump 45. I would wager not. The pictures I posted included the M89A/UMP mag - which is a G&G clone. The feed port is toward the rear of the mag, the UTR it's towards the front. Link to comment Share on other sites More sharing options...
ak2m4 Posted February 22, 2022 Share Posted February 22, 2022 Nice, I see they are bringing out a version without that hideous clubfoot 🙂 Link to comment Share on other sites More sharing options...
Stevobeavo Posted February 22, 2022 Author Share Posted February 22, 2022 6 hours ago, Speedbird_666 said: I would wager not. The pictures I posted included the M89A/UMP mag - which is a G&G clone. The feed port is toward the rear of the mag, the UTR it's towards the front. Sorry I meant the g&g ones working with the M89A. I missed the pictures. Speedbird_666 1 Link to comment Share on other sites More sharing options...
Mr3ko Posted March 14, 2022 Share Posted March 14, 2022 I do belive the G&G PCC45 magazines fit and work well in this replica Speedbird_666 1 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 14, 2022 Share Posted March 14, 2022 1 hour ago, Mr3ko said: I do belive the G&G PCC45 magazines fit and work well in this replica Good info. I take it they feed fine? Oh, and welcome to the forums. 🙂 Link to comment Share on other sites More sharing options...
Stevobeavo Posted March 15, 2022 Author Share Posted March 15, 2022 15 hours ago, Mr3ko said: I do belive the G&G PCC45 magazines fit and work well in this replica I did notice pheas Airsoft mention these mags do fit but I haven't seen one being test fired. Also I'm not a fan of how that looks. Taking mine out this Saturday for the first time. Looking forward to seeing how it performs Link to comment Share on other sites More sharing options...
Mr3ko Posted March 15, 2022 Share Posted March 15, 2022 (edited) 14 hours ago, Speedbird_666 said: Good info. I take it they feed fine? Oh, and welcome to the forums. 🙂 This was a conversation I was having with fellow UTR45 owner on discord on pheas airsoft coincidentally he was using midcaps ive recently placed an order for some high caps will update with more info when they arrive, thanks for having me Edited March 15, 2022 by Mr3ko Paul Mckee 1 Link to comment Share on other sites More sharing options...
ak2m4 Posted March 15, 2022 Share Posted March 15, 2022 @Mr3ko wtf! is that a sticker on those mags? do they come out of the box like that. how much did you pay for the hi-cap? are they flash wind or wheel. Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 15, 2022 Share Posted March 15, 2022 (edited) 1 hour ago, ak2m4 said: @Mr3ko wtf! is that a sticker on those mags? do they come out of the box like that. They are plastic fake rounds: Edited March 15, 2022 by Speedbird_666 Link to comment Share on other sites More sharing options...
ak2m4 Posted March 15, 2022 Share Posted March 15, 2022 @Speedbird_666 thanks. the 520 rnd mag is wheel based for anyone who is interested. Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 15, 2022 Share Posted March 15, 2022 Looks like a ball-ache to get apart. Pesky Ambi controls with their associated cogs and tiny pieces.... Link to comment Share on other sites More sharing options...
Fatboy40 Posted March 16, 2022 Share Posted March 16, 2022 12 hours ago, Speedbird_666 said: Looks like a ball-ache to get apart. Pesky Ambi controls with their associated cogs and tiny pieces.... It does look pretty, however I'll take a DE M900 over it due to their structural simplicity and identical internals. Link to comment Share on other sites More sharing options...
mightyjebus Posted September 4, 2022 Share Posted September 4, 2022 Nice review. I've picked one of these up and thankfully the internals are the same great stuff in the M9XX series. I first thought it was a made up replica by Double Eagle but it turns out it's actually based on a real firearm http://www.imfdb.org/wiki/LWRC_SMG-45 it's also good to see a whole bunch of rails, screws, a different mag release and the battery adapter in the box as well. Hotweeweejef 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now