MilesR97 Posted June 6, 2022 Share Posted June 6, 2022 (edited) I’ve just received my tm mp5a5 ngrs and the magazines seem quite difficult to put in and after loading them around 20-30 times they’ve slightly worn away at the side. can anyone confirm this is normal or not? cheers Edited June 6, 2022 by MilesR97 JimFromHorsham 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 6, 2022 Supporters Share Posted June 6, 2022 Had the same, not sure what to do about it though. Link to comment Share on other sites More sharing options...
MilesR97 Posted June 6, 2022 Share Posted June 6, 2022 5 minutes ago, TheFull9 said: Had the same, not sure what to do about it though. same, i feel like sending it back and asking for another one but i dunno how that will go with such limited stock etc.. i really have to force the mags in though, it definitely doesnt seem right 😕 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 6, 2022 Supporters Share Posted June 6, 2022 Not to be funny but what would another one achieve? It's the design. For now all I can do is press the mag catch lever as the mag is going in, if it's as common as I suspect an update or aftermarket fix will come. Link to comment Share on other sites More sharing options...
MilesR97 Posted June 6, 2022 Share Posted June 6, 2022 34 minutes ago, TheFull9 said: Not to be funny but what would another one achieve? It's the design. For now all I can do is press the mag catch lever as the mag is going in, if it's as common as I suspect an update or aftermarket fix will come. I didnt realise this was a really common problem and thought mine was faulty, but it seems its fairly normal, sorry. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 6, 2022 Supporters Share Posted June 6, 2022 Nothing to apologise about mate lol, but if there's 2 people in just this small thread it's probably common and a design flaw; someone else will now say they don't have it but I'd bet this issue will show up a lot as the guns get more prevalent and get used over the next year or so. That's airsoft, unfortunately it's a niche tinkerers' hobby, and sure you have the same consumer rights as with anything, but you'd just waste your own time getting repeated returns quite likely. Sometimes you've gotta bite the bullet in this game. Link to comment Share on other sites More sharing options...
Bunkerstevo94 Posted June 7, 2022 Share Posted June 7, 2022 Just a heads up SRC stocks fit only require the hole drilling out to allow the tm pin to pass through about a 1mm too small of a diameter just waiting on my Midwest industries rail Mels, TheFull9, Wavey_Gravey and 1 other 3 1 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted June 7, 2022 Share Posted June 7, 2022 (edited) On 06/06/2022 at 13:56, MilesR97 said: I’ve just received my tm mp5a5 ngrs and the magazines seem quite difficult to put in and after loading them around 20-30 times they’ve slightly worn away at the side. can anyone confirm this is normal or not? cheers mags are snug in mine , they have to be perfectly square or it’s a no go , depressing the mag release a touch also makes life a bit easier . The wear you are seeing would likely be 10times worse with a loose fitting rattletastic edition. Try a wipe over inside the magwell and the tops of the mags with some easyglide silicone spray , the key here is wipe .. dont spray it directly into or onto , just a little on a cloth . Edited June 7, 2022 by JimFromHorsham Link to comment Share on other sites More sharing options...
Hatchet Posted June 11, 2022 Share Posted June 11, 2022 Managed the spring upgrade on mine to an Eagle 6 M100, also seeing around 340. Wasn't too difficult, just following the video and going slow. I found I didn't need to take it apart quite as much as they did (I didn't take the FCU off or remove the recoil unit). Slightly arsed up putting recoil unit back together, but worked it out in the end. Also seemed a bit fiddly getting the fire selector back in. At least the barrel/hop is accessible without taking the whole lower receiver apart, unlike the original. I didn't though. Testing tomorrow I think... TheFull9 1 Link to comment Share on other sites More sharing options...
Bunkerstevo94 Posted June 17, 2022 Share Posted June 17, 2022 Midwest industries rail turned up now to get some batteries small enough to fit JimFromHorsham 1 Link to comment Share on other sites More sharing options...
Xepo Posted June 18, 2022 Share Posted June 18, 2022 Hey folks, any of you have a recommendation for a speed loader like the odin sidewinder? I bought one from big dragon with an adapter but it seems the NGRS are a bit fatter Link to comment Share on other sites More sharing options...
Mels Posted June 19, 2022 Share Posted June 19, 2022 (edited) 6 hours ago, Xepo said: Hey folks, any of you have a recommendation for a speed loader like the odin sidewinder? I bought one from big dragon with an adapter but it seems the NGRS are a bit fatter I think this is the sloset you will get at the moment. https://www.airtac.me/shop/p/tm-mp5-ngrs Edited June 19, 2022 by Mels JamesWills 1 Link to comment Share on other sites More sharing options...
Xepo Posted June 19, 2022 Share Posted June 19, 2022 10 hours ago, Mels said: I think this is the sloset you will get at the moment. https://www.airtac.me/shop/p/tm-mp5-ngrs Alright haha, thanks for the link! Link to comment Share on other sites More sharing options...
Xepo Posted June 23, 2022 Share Posted June 23, 2022 On 20/05/2022 at 20:57, Mels said: Thanks Stew, that's what I was hoping. Has anyone here tried the G&P flashlight handguard? Hey, I tried this today. It won't fit without taking a bit from the insides. Personally not a fan of the quality, in my case the button for the light has shady contacts which makes it more of a strobe than anything else. Returning it. Link to comment Share on other sites More sharing options...
JamesWills Posted June 24, 2022 Author Share Posted June 24, 2022 12 hours ago, Xepo said: Hey, I tried this today. It won't fit without taking a bit from the insides. Personally not a fan of the quality, in my case the button for the light has shady contacts which makes it more of a strobe than anything else. Returning it. Unfortunately all torch grips on the market require some modification to be "useable" I wasnt massively impressed with the quality of the VFC torchgrip I've got but its 10% of the price of a RS surefire grip Link to comment Share on other sites More sharing options...
Hatchet Posted June 24, 2022 Share Posted June 24, 2022 I'm still waiting in the hopes that TM will release one. If they do the same job as they have on the polymer on the gun it should be good. Mind you, I'm still hoping they'll release some more mags, so... Link to comment Share on other sites More sharing options...
mightyjebus Posted June 24, 2022 Share Posted June 24, 2022 7 hours ago, Hatchet said: Mind you, I'm still hoping they'll release some more mags, so... in stock here: https://www.sixmm.com/collections/back-in-stock/products/copy-of-tokyo-marui-mp5a5-high-capacity-aeg-magazine-for-tokyo-marui-mp5a5-next-gen-70rds I've never had a problem ordering from sixmm but some people migth have another opinion. Also of interest is these 2 parts from JKArmy https://shop.jkarmy.com/bm-rmr-mount01.html https://shop.jkarmy.com/bm-gmf-stk05a.html I quite like the stock. I have one on my ACP9 and it's a good stock so I might add one to the MP5 Hatchet 1 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted June 24, 2022 Share Posted June 24, 2022 (edited) 1 hour ago, mightyjebus said: in stock here: https://www.sixmm.com/collections/back-in-stock/products/copy-of-tokyo-marui-mp5a5-high-capacity-aeg-magazine-for-tokyo-marui-mp5a5-next-gen-70rds I've never had a problem ordering from sixmm but some people migth have another opinion. Also of interest is these 2 parts from JKArmy https://shop.jkarmy.com/bm-rmr-mount01.html https://shop.jkarmy.com/bm-gmf-stk05a.html I quite like the stock. I have one on my ACP9 and it's a good stock so I might add one to the MP5 regarding the stock , if the “fit” is anything like the adaptor I bought then I’d avoid it , very poor fit with no real way to correct it looks lovely and I had high hopes for it but sadly it flops around like an old donkeys cock. Edited June 24, 2022 by JimFromHorsham Link to comment Share on other sites More sharing options...
mightyjebus Posted June 24, 2022 Share Posted June 24, 2022 a 3D printed sleave between the receiver and the stock would probably work JimFromHorsham 1 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted June 24, 2022 Share Posted June 24, 2022 2 minutes ago, mightyjebus said: a 3D printed sleave between the receiver and the stock would probably work Ii wonder if they’ve used the same specification for the fit of complete stock kit as the adaptor , if you want to take a look at the adaptor before committing and think you may be able to do a workaround then I’d be happy to send the adaptor for you to take a look at . It’s just sat here doing nothing at the moment , if you figure something out then do it twice and let me buy one and if you don’t then just pop it back in the post . offers there if it may be of help Link to comment Share on other sites More sharing options...
Xepo Posted June 25, 2022 Share Posted June 25, 2022 18 hours ago, mightyjebus said: in stock here: https://www.sixmm.com/collections/back-in-stock/products/copy-of-tokyo-marui-mp5a5-high-capacity-aeg-magazine-for-tokyo-marui-mp5a5-next-gen-70rds I've never had a problem ordering from sixmm but some people migth have another opinion. Also of interest is these 2 parts from JKArmy https://shop.jkarmy.com/bm-rmr-mount01.html https://shop.jkarmy.com/bm-gmf-stk05a.html I quite like the stock. I have one on my ACP9 and it's a good stock so I might add one to the MP5 Oh damn, thanks for posting the mount. Was looking for something like that. Impulse101 has the official Marui one, but they don't ship to NL =[ Link to comment Share on other sites More sharing options...
LoopDK Posted July 1, 2022 Share Posted July 1, 2022 Was looking to get the SD6 but i got a great offer on a A5 so after reading the 9 pages i still dont know what rail thats fits and what battey tthats fits. Plz help Link to comment Share on other sites More sharing options...
Yuukan Posted July 3, 2022 Share Posted July 3, 2022 Has anyone found a full length mlok optic mount ? Hoping to have a way to mount my light pressure switch on to the top of the MP5. Link to comment Share on other sites More sharing options...
JamesWills Posted July 4, 2022 Author Share Posted July 4, 2022 12 hours ago, Yuukan said: Has anyone found a full length mlok optic mount ? Hoping to have a way to mount my light pressure switch on to the top of the MP5. https://www.sixmm.com/products/army-force-airsoft-top-scope-rail-mountfor-tokyo-marui-mp5-aeg-umarex-mp5-gbb-series JimFromHorsham 1 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted July 15, 2022 Share Posted July 15, 2022 On 04/07/2022 at 09:45, JamesWills said: https://www.sixmm.com/products/army-force-airsoft-top-scope-rail-mountfor-tokyo-marui-mp5-aeg-umarex-mp5-gbb-series that was a good link , thank you On 24/06/2022 at 19:11, mightyjebus said: a 3D printed sleave between the receiver and the stock would probably work just wanted to say a big public thankyou to the very talented @mightyjebus for making dreams come true using his technical ability and my supreme postal prowess he sorted my MP5 stock adaptor good and proper ! It’s now solid as rock , thank you Paul JamesWills 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now