Jump to content

TM MP5 NGRS Owners


JamesWills

Recommended Posts

Does anyone know/has anyone tried a VFC retractable stock on their MP5? I can't find a replacement Marui one and hoping a VFC might fit...

Link to comment
Share on other sites

28 minutes ago, kt82 said:

Does anyone know/has anyone tried a VFC retractable stock on their MP5? I can't find a replacement Marui one and hoping a VFC might fit...

The solid stock fits but the sliding stock for the gbb has a buffer etc in it.  I'll try it later when I get chance

Link to comment
Share on other sites

On 07/06/2024 at 00:01, 1st commando said:

BIOs often aren't as good as non bio BBs especially if they aren't a good brand.

Personally i will not use bios in any of my rifles 

The trouble is my local site insists on bios, so I need to find some that are half decent and feed reliably 😩

Link to comment
Share on other sites

On 07/06/2024 at 21:15, 1st commando said:

The solid stock fits but the sliding stock for the gbb has a buffer etc in it.  I'll try it later when I get chance

 

Any luck with the retractable stock? I have the original Marui butt and the whole locking module itself, I just don't have the two bars which retract...

 

If they fit, at least I can try moving them over to the TM parts...

Link to comment
Share on other sites

1 hour ago, kt82 said:

 

Any luck with the retractable stock? I have the original Marui butt and the whole locking module itself, I just don't have the two bars which retract...

 

If they fit, at least I can try moving them over to the TM parts...

Oh good point I'll try it when I go upstairs in a bit

Link to comment
Share on other sites

On 06/06/2024 at 19:34, Hotweeweejef said:

Any one else run into feeding issues with certain BBs
 

Only just got mine and had nothing but issues. Using some bios that I’ve not used before so I’m hope if it’s just that. 
Initially slight forward pressure on the bottom of the mag helped but now it’s just random whether it will feed on not. 
 

 

Think I may have found the actual reason I’ve been having feeding issues with my RIF
After watching a disassembly video of

the NGRS MP5, I noticed that mine is missing the spring that fits over the inner barrel and puts pressure on the hop unit when the outer barrel is installed. 
 
5E74DE1A-F514-42A3-B720-CEF813B5BDD6.thumb.jpeg.e0503bef22685042046b213011944943.jpeg

 

There is small amount of free play back and forth without it and I think may be causing misalignment with the feed lips on the mags.

Any idea where I might be able source a replacement? 

Link to comment
Share on other sites

  • 2 weeks later...

Can I please ask a question as an absolute newbie to this gun and the AS world generally?

 

I've just purchased one of these TM MP5 NGRS and it's being delivered next week. I know absolutely nothing at the moment about batteries, the connectors or chargers.

 

I'm not looking for anything budget, so can anyone advise as to the best battery that fits into the factory foregrip on these and the connector required? I would also appreciate any advise on the best chargers - I am looking to add an AEG assault rifle to my collection in the near future so want something that can service all LiPo etc. Complete beginner sorry!

 

Any advise would be awesome and gratefully received 👍

Link to comment
Share on other sites

5 hours ago, KDairsoft said:

How do those batteries compare to the Mini-s in size?

No idea what a Mini-S is.

Link to comment
Share on other sites

  • 5 weeks later...

Hi all, anyone know how to clean the barrel on the MP5 ngrs. Should I be removing it before cleaning to avoid damaging the hop up. I thought your meant to use the cleaning rod inserting from the hop up side to the front. 

 

Cheers 

Link to comment
Share on other sites

  • Supporters

'The standard' is to turn your hop fully off then just go from the front.  Long as you're not using anything abrasive and are careful/gentle/don't go ham fisted at it then it'll be absolutely fine, nothing adverse is going to happen.

Link to comment
Share on other sites

  • 3 weeks later...

Hi all,

 

just checking if there is anyone can point me to an Odin adapter for the slightly wider NGRS MP5 Mags?  Seems the few avil ahave sold out 😞 

 

ta in advance

Link to comment
Share on other sites

  • 4 weeks later...
2 hours ago, mightyjebus said:

for those that might be interested the 5KU monolithic rail kit is a drop in fit and gives the MP5 more rail space.

That’s looks pretty slick. 
 

What it like for battery space? Looks tiiiiight 😬

Link to comment
Share on other sites

  • 2 weeks later...
On 27/08/2024 at 15:27, Scorp said:

Hi all,

 

just checking if there is anyone can point me to an Odin adapter for the slightly wider NGRS MP5 Mags?  Seems the few avil ahave sold out 😞 

 

ta in advance

Back in stock at https://airtac.me/products/tm-mp5-ngrs-odin-sidewinder-adapter?_pos=2&_psq=Ngrs&_ss=e&_v=1.0

Link to comment
Share on other sites

On 21/06/2024 at 16:02, Cyy8883 said:

I've got a broken control board in my SD6. Has anyone replaced their mosfet with a 3rd party one?

Did you get anywhere with this. I’m in the same situation. Thanks

Link to comment
Share on other sites

On 07/10/2024 at 23:35, Marf83 said:

Did you get anywhere with this. I’m in the same situation. Thanks

@Marf83@Cyy8883 check out this thread, seems someone managed to...

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...