kt82 Posted June 7 Share Posted June 7 Does anyone know/has anyone tried a VFC retractable stock on their MP5? I can't find a replacement Marui one and hoping a VFC might fit... Link to comment Share on other sites More sharing options...
1st commando Posted June 7 Share Posted June 7 28 minutes ago, kt82 said: Does anyone know/has anyone tried a VFC retractable stock on their MP5? I can't find a replacement Marui one and hoping a VFC might fit... The solid stock fits but the sliding stock for the gbb has a buffer etc in it. I'll try it later when I get chance Link to comment Share on other sites More sharing options...
Hotweeweejef Posted June 7 Share Posted June 7 On 07/06/2024 at 00:01, 1st commando said: BIOs often aren't as good as non bio BBs especially if they aren't a good brand. Personally i will not use bios in any of my rifles The trouble is my local site insists on bios, so I need to find some that are half decent and feed reliably 😩 Link to comment Share on other sites More sharing options...
Jacob Wright Posted June 9 Share Posted June 9 I’ve been using Geoffs Bio BB’s for a couple of years in my NGRS, can’t fault them 👍🏼 Hotweeweejef 1 Link to comment Share on other sites More sharing options...
kt82 Posted June 11 Share Posted June 11 On 07/06/2024 at 21:15, 1st commando said: The solid stock fits but the sliding stock for the gbb has a buffer etc in it. I'll try it later when I get chance Any luck with the retractable stock? I have the original Marui butt and the whole locking module itself, I just don't have the two bars which retract... If they fit, at least I can try moving them over to the TM parts... Link to comment Share on other sites More sharing options...
1st commando Posted June 11 Share Posted June 11 1 hour ago, kt82 said: Any luck with the retractable stock? I have the original Marui butt and the whole locking module itself, I just don't have the two bars which retract... If they fit, at least I can try moving them over to the TM parts... Oh good point I'll try it when I go upstairs in a bit Link to comment Share on other sites More sharing options...
1st commando Posted June 11 Share Posted June 11 The answer is no it will not fit, at least not without modification Link to comment Share on other sites More sharing options...
kt82 Posted June 11 Share Posted June 11 Ok mate. Thanks for trying 😔 Link to comment Share on other sites More sharing options...
Hotweeweejef Posted June 13 Share Posted June 13 On 06/06/2024 at 19:34, Hotweeweejef said: Any one else run into feeding issues with certain BBs Only just got mine and had nothing but issues. Using some bios that I’ve not used before so I’m hope if it’s just that. Initially slight forward pressure on the bottom of the mag helped but now it’s just random whether it will feed on not. Think I may have found the actual reason I’ve been having feeding issues with my RIF. After watching a disassembly video of the NGRS MP5, I noticed that mine is missing the spring that fits over the inner barrel and puts pressure on the hop unit when the outer barrel is installed. There is small amount of free play back and forth without it and I think may be causing misalignment with the feed lips on the mags. Any idea where I might be able source a replacement? Link to comment Share on other sites More sharing options...
Cyy8883 Posted June 21 Share Posted June 21 I've got a broken control board in my SD6. Has anyone replaced their mosfet with a 3rd party one? Link to comment Share on other sites More sharing options...
Theturdinator Posted July 3 Share Posted July 3 Just incase anyone interested, the MP5 ngrs pulls around 15A continuous on full auto without firing bbs with a 8.4V Nimh. I was thinking of installing a switch so I don't have to remove the battery everytime. VID_20240703072041.mp4 Link to comment Share on other sites More sharing options...
Doyley83 Posted July 7 Share Posted July 7 Can I please ask a question as an absolute newbie to this gun and the AS world generally? I've just purchased one of these TM MP5 NGRS and it's being delivered next week. I know absolutely nothing at the moment about batteries, the connectors or chargers. I'm not looking for anything budget, so can anyone advise as to the best battery that fits into the factory foregrip on these and the connector required? I would also appreciate any advise on the best chargers - I am looking to add an AEG assault rifle to my collection in the near future so want something that can service all LiPo etc. Complete beginner sorry! Any advise would be awesome and gratefully received 👍 Link to comment Share on other sites More sharing options...
mightyjebus Posted July 7 Share Posted July 7 buy these 4 things. https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-checker-for-tm-ms-li-po-chargers-batteries/ https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-7-4v-1500mah-airsoft-battery-model-standard-type/ https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-7-4v-1500mah-airsoft-battery-model-standard-type/ https://eagle6.co.uk/product/tokyo-marui-dedicated-ms-li-po-battery-charger Doyley83 1 Link to comment Share on other sites More sharing options...
KDairsoft Posted July 8 Share Posted July 8 18 hours ago, mightyjebus said: buy these 4 things. https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-checker-for-tm-ms-li-po-chargers-batteries/ https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-7-4v-1500mah-airsoft-battery-model-standard-type/ https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-7-4v-1500mah-airsoft-battery-model-standard-type/ https://eagle6.co.uk/product/tokyo-marui-dedicated-ms-li-po-battery-charger How do those batteries compare to the Mini-s in size? Link to comment Share on other sites More sharing options...
mightyjebus Posted July 8 Share Posted July 8 5 hours ago, KDairsoft said: How do those batteries compare to the Mini-s in size? No idea what a Mini-S is. Link to comment Share on other sites More sharing options...
Theturdinator Posted August 7 Share Posted August 7 Hi all, anyone know how to clean the barrel on the MP5 ngrs. Should I be removing it before cleaning to avoid damaging the hop up. I thought your meant to use the cleaning rod inserting from the hop up side to the front. Cheers Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted August 7 Supporters Share Posted August 7 'The standard' is to turn your hop fully off then just go from the front. Long as you're not using anything abrasive and are careful/gentle/don't go ham fisted at it then it'll be absolutely fine, nothing adverse is going to happen. Theturdinator 1 Link to comment Share on other sites More sharing options...
Scorp Posted August 27 Share Posted August 27 Hi all, just checking if there is anyone can point me to an Odin adapter for the slightly wider NGRS MP5 Mags? Seems the few avil ahave sold out 😞 ta in advance Link to comment Share on other sites More sharing options...
mightyjebus Posted September 23 Share Posted September 23 for those that might be interested the 5KU monolithic rail kit is a drop in fit and gives the MP5 more rail space. Doyley83, Jacob Wright, ButcherBill and 1 other 2 2 Link to comment Share on other sites More sharing options...
Hotweeweejef Posted September 23 Share Posted September 23 2 hours ago, mightyjebus said: for those that might be interested the 5KU monolithic rail kit is a drop in fit and gives the MP5 more rail space. That’s looks pretty slick. What it like for battery space? Looks tiiiiight 😬 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 23 Share Posted September 23 7.4 saddle bag lipo's fit Link to comment Share on other sites More sharing options...
Treefrog2 Posted October 7 Share Posted October 7 On 27/08/2024 at 15:27, Scorp said: Hi all, just checking if there is anyone can point me to an Odin adapter for the slightly wider NGRS MP5 Mags? Seems the few avil ahave sold out 😞 ta in advance Back in stock at https://airtac.me/products/tm-mp5-ngrs-odin-sidewinder-adapter?_pos=2&_psq=Ngrs&_ss=e&_v=1.0 Link to comment Share on other sites More sharing options...
mightyjebus Posted October 7 Share Posted October 7 probably one for the A4 users as battery space will be a problem. https://www.octagonairsoft.com/product-page/fcw-kac-mp5-20mm-rail https://www.octagonairsoft.com/product-page/fcw-kac-ris-for-tokyo-marui-mp5-next-generation-ebb Link to comment Share on other sites More sharing options...
Marf83 Posted October 7 Share Posted October 7 On 21/06/2024 at 16:02, Cyy8883 said: I've got a broken control board in my SD6. Has anyone replaced their mosfet with a 3rd party one? Did you get anywhere with this. I’m in the same situation. Thanks Link to comment Share on other sites More sharing options...
Jacob Wright Posted October 9 Share Posted October 9 On 07/10/2024 at 23:35, Marf83 said: Did you get anywhere with this. I’m in the same situation. Thanks @Marf83@Cyy8883 check out this thread, seems someone managed to... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now