Jump to content

TM MP5 NGRS Owners


JamesWills

Recommended Posts

5 minutes ago, TheFull9 said:

Had the same, not sure what to do about it though.

same, i feel like sending it back and asking for another one but i dunno how that will go with such limited stock etc.. i really have to force the mags in though, it definitely doesnt seem right 😕

Link to comment
Share on other sites

  • Supporters

Not to be funny but what would another one achieve?  It's the design.  For now all I can do is press the mag catch lever as the mag is going in, if it's as common as I suspect an update or aftermarket fix will come.

Link to comment
Share on other sites

34 minutes ago, TheFull9 said:

Not to be funny but what would another one achieve?  It's the design.  For now all I can do is press the mag catch lever as the mag is going in, if it's as common as I suspect an update or aftermarket fix will come.

I didnt realise this was a really common problem and thought mine was faulty, but it seems its fairly normal, sorry.

Link to comment
Share on other sites

  • Supporters

Nothing to apologise about mate lol, but if there's 2 people in just this small thread it's probably common and a design flaw; someone else will now say they don't have it but I'd bet this issue will show up a lot as the guns get more prevalent and get used over the next year or so.  That's airsoft, unfortunately it's a niche tinkerers' hobby, and sure you have the same consumer rights as with anything, but you'd just waste your own time getting repeated returns quite likely.  Sometimes you've gotta bite the bullet in this game.

Link to comment
Share on other sites

On 06/06/2022 at 13:56, MilesR97 said:

I’ve just received my tm mp5a5 ngrs and the magazines seem quite difficult to put in and after loading them around 20-30 times they’ve slightly worn away at the side. can anyone confirm this is normal or not? cheers

946D4CF1-0F2A-49B6-9361-5D7FAFE0165C.jpeg

mags are snug in mine , they have to be perfectly square or it’s a no go , depressing the mag release a touch also makes life a bit easier . The wear you are seeing would likely be 10times worse with a loose fitting rattletastic edition. Try a wipe over inside the magwell and the tops of the mags with some easyglide silicone spray , the key here is wipe .. dont spray it directly into or onto , just a little on a cloth .

Edited by JimFromHorsham
Link to comment
Share on other sites

Managed the spring upgrade on mine to an Eagle 6 M100, also seeing around 340.

 

Wasn't too difficult, just following the video and going slow. I found I didn't need to take it apart quite as much as they did (I didn't take the FCU off or remove the recoil unit).

Slightly arsed up putting recoil unit back together, but worked it out in the end. Also seemed a bit fiddly getting the fire selector back in.

 

At least the barrel/hop is accessible without taking the whole lower receiver apart, unlike the original. I didn't though.

 

Testing tomorrow I think...

Link to comment
Share on other sites

6 hours ago, Xepo said:

Hey folks, any of you have a recommendation for a speed loader like the odin sidewinder? 

 

I bought one from big dragon with an adapter but it seems the NGRS are a bit fatter

IMG-20220616-WA0003.jpeg

 

 

I think this is the sloset you will get at the moment.

 

 

 

 

 

 

 

 

 

 

spacer.png

 

 

 

 

 

https://www.airtac.me/shop/p/tm-mp5-ngrs

Edited by Mels
Link to comment
Share on other sites

On 20/05/2022 at 20:57, Mels said:

Thanks Stew, that's what I was hoping. 

Has anyone here tried the G&P flashlight handguard?

 

GP-tal002.jpg.f8ea7d727b857ba78b846c3f54eb06ac.jpg

 

Hey, I tried this today. It won't fit without taking a bit from the insides. Personally not a fan of the quality, in my case the button for the light has shady contacts which makes it more of a strobe than anything else. Returning it.

WhatsApp Image 2022-06-23 at 8.22.09 PM.jpeg

Link to comment
Share on other sites

12 hours ago, Xepo said:

 

Hey, I tried this today. It won't fit without taking a bit from the insides. Personally not a fan of the quality, in my case the button for the light has shady contacts which makes it more of a strobe than anything else. Returning it.

WhatsApp Image 2022-06-23 at 8.22.09 PM.jpeg

 

Unfortunately all torch grips on the market require some modification to be "useable" I wasnt massively impressed with the quality of the VFC torchgrip I've got but its 10% of the price of a RS surefire grip

Link to comment
Share on other sites

I'm still waiting in the hopes that TM will release one. If they do the same job as they have on the polymer on the gun it should be good.

 

Mind you, I'm still hoping they'll release some more mags, so...

Link to comment
Share on other sites

7 hours ago, Hatchet said:

 

 

Mind you, I'm still hoping they'll release some more mags, so...

 

in stock here: https://www.sixmm.com/collections/back-in-stock/products/copy-of-tokyo-marui-mp5a5-high-capacity-aeg-magazine-for-tokyo-marui-mp5a5-next-gen-70rds

 

I've never had a problem ordering from sixmm but some people migth have another opinion.

 

Also of interest is these 2 parts from JKArmy

https://shop.jkarmy.com/bm-rmr-mount01.html

https://shop.jkarmy.com/bm-gmf-stk05a.html

 

I quite like the stock. I have one on my ACP9 and it's a good stock so I might add one to the MP5

Link to comment
Share on other sites

1 hour ago, mightyjebus said:

 

in stock here: https://www.sixmm.com/collections/back-in-stock/products/copy-of-tokyo-marui-mp5a5-high-capacity-aeg-magazine-for-tokyo-marui-mp5a5-next-gen-70rds

 

I've never had a problem ordering from sixmm but some people migth have another opinion.

 

Also of interest is these 2 parts from JKArmy

https://shop.jkarmy.com/bm-rmr-mount01.html

https://shop.jkarmy.com/bm-gmf-stk05a.html

 

I quite like the stock. I have one on my ACP9 and it's a good stock so I might add one to the MP5


regarding the stock , if the “fit” is anything like the adaptor I bought then I’d avoid it , very poor fit with no real way to correct it :(


looks lovely and I had high hopes for it but sadly it flops around like an old donkeys cock.

9B9D9D1D-1EEC-4B05-A624-C67A178DA70E.thumb.jpeg.017db3897f4e1500ba76eca4f7fceb74.jpeg

Edited by JimFromHorsham
Link to comment
Share on other sites

2 minutes ago, mightyjebus said:

a 3D printed sleave between the receiver and the stock would probably work


Ii wonder if they’ve used the same specification for the fit of complete stock kit as the adaptor , if you want to take a look at the adaptor before committing and think you may be able to do a workaround then I’d be happy to send the adaptor for you to take a look at . It’s just sat here doing nothing at the moment , if you figure something out then do it twice and let me buy one :D and if you don’t then just pop it back in the post .

 

offers there if it may be of help :) 

Link to comment
Share on other sites

18 hours ago, mightyjebus said:

 

in stock here: https://www.sixmm.com/collections/back-in-stock/products/copy-of-tokyo-marui-mp5a5-high-capacity-aeg-magazine-for-tokyo-marui-mp5a5-next-gen-70rds

 

I've never had a problem ordering from sixmm but some people migth have another opinion.

 

Also of interest is these 2 parts from JKArmy

https://shop.jkarmy.com/bm-rmr-mount01.html

https://shop.jkarmy.com/bm-gmf-stk05a.html

 

I quite like the stock. I have one on my ACP9 and it's a good stock so I might add one to the MP5

 

Oh damn, thanks for posting the mount. Was looking for something like that. Impulse101 has the official Marui one, but they don't ship to NL =[

Link to comment
Share on other sites

Was looking to get the SD6 but i got a great offer on a A5 so after reading the 9 pages i still dont know what rail thats fits and what battey tthats fits.

 

 

Plz help

Link to comment
Share on other sites

Has anyone found a full length mlok optic mount ?
Hoping to have a way to mount my light pressure switch on to the top of the MP5.

Link to comment
Share on other sites

12 hours ago, Yuukan said:

Has anyone found a full length mlok optic mount ?
Hoping to have a way to mount my light pressure switch on to the top of the MP5.

 

https://www.sixmm.com/products/army-force-airsoft-top-scope-rail-mountfor-tokyo-marui-mp5-aeg-umarex-mp5-gbb-series

Link to comment
Share on other sites

  • 2 weeks later...
On 04/07/2022 at 09:45, JamesWills said:


that was a good link , thank you :)

 

267A16B1-FE27-4D6A-8BD3-4F39D057C29E.thumb.jpeg.b28f89bd9f17bed79eb6f4fb46860f82.jpegF6CD36FD-0D6A-45ED-8BDC-47306DEA8683.thumb.jpeg.517f494a42a3b5aedf77679b5e83c008.jpeg

On 24/06/2022 at 19:11, mightyjebus said:

a 3D printed sleave between the receiver and the stock would probably work


just wanted to say a big public thankyou to the very talented @mightyjebus for making dreams come true :)

 

using his technical ability and my supreme postal prowess he sorted my MP5 stock adaptor good and proper ! 
It’s now solid as rock , thank you Paul :)

 

8475CB05-625D-4A04-AA93-914D4BDBE983.thumb.jpeg.0e4029a62eb2d970fff3a75d95de3e5f.jpeg

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...