Skara Posted December 1, 2022 Share Posted December 1, 2022 1 hour ago, Steveocee said: new hammer material It's still weak, maybe not as weak as the original black one, but not ideal for prolonged use. I've already seen a few shanked ones at my local retailer (the owners probably abused full auto from the get go) Link to comment Share on other sites More sharing options...
Steveocee Posted December 1, 2022 Share Posted December 1, 2022 7 hours ago, Skara said: It's still weak, maybe not as weak as the original black one, but not ideal for prolonged use. I've already seen a few shanked ones at my local retailer (the owners probably abused full auto from the get go) I'm pretty frugal anyway but the price increase on BB's lately I won't be going full auto. Link to comment Share on other sites More sharing options...
crawsader01 Posted December 1, 2022 Share Posted December 1, 2022 Need some advice. I recently did some upgrades to my aap-01 and ran into 2 big issues. One issues being i get random burst of full auto when it's in semi. The second issue being the bolt gets jammed and once i free it it fires on its own. The only thing i noticed is that i think the trigger only engages when there is either a mag in or when pressure is applied to the upper. These issues only seem to appear with hpa. Would appreciate some help. Part list: -Ctm lightweight bolt -Stock nozzle set and piston head -140% recoil spring no short stroke but would like to add it back -200% nozzle spring -stock fire selector and plate -cowcow steel hammer set -cowcow steel auto sear -cowcow fire lock pin -stock trigger -AA cnc hop unit -60° maple autobot -stalker panthera nub -AA 6.03 inner barrel -stock upper receiver Hpa stuff: -Primary airsoft adapter -valken tank -balystik reg Link to comment Share on other sites More sharing options...
diamondtip Posted December 2, 2022 Share Posted December 2, 2022 good day to all, new to this thread and interested in trying something a bit different. Does anyone know if an AAP-01 can be printed on a 3d printer (the upper and the grip) and then the internals can be bought separately and placed inside, just wondering where i woud be able to get the full internals purchased to put inside the printed frame. i hope you all understand what it is im trying to accomplish. Link to comment Share on other sites More sharing options...
leadly Posted December 2, 2022 Share Posted December 2, 2022 (edited) 8 hours ago, diamondtip said: good day to all, new to this thread and interested in trying something a bit different. Does anyone know if an AAP-01 can be printed on a 3d printer (the upper and the grip) and then the internals can be bought separately and placed inside, just wondering where i woud be able to get the full internals purchased to put inside the printed frame. i hope you all understand what it is im trying to accomplish. Might work out cheaper to just try and find a 2nd hand AAP. Then you can use the internals and measure up the body for printing. Edited December 2, 2022 by leadly Link to comment Share on other sites More sharing options...
diamondtip Posted December 2, 2022 Share Posted December 2, 2022 5 hours ago, leadly said: Might work out cheaper to just try and find a 2nd hand AAP. Then you can use the internals and measure up the body for printing. well actually the reason i ask is becaause importing an airsoft gun is illegal where im from, there are the loopholes for the rich and famous but the average joe cannot import one so that is the main cause for this experiment. Link to comment Share on other sites More sharing options...
Steveocee Posted December 7, 2022 Share Posted December 7, 2022 On 02/12/2022 at 03:17, diamondtip said: good day to all, new to this thread and interested in trying something a bit different. Does anyone know if an AAP-01 can be printed on a 3d printer (the upper and the grip) and then the internals can be bought separately and placed inside, just wondering where i woud be able to get the full internals purchased to put inside the printed frame. i hope you all understand what it is im trying to accomplish. Airsoftworld sell a lot of the internals separeately. Even the upper and lowers. Link to comment Share on other sites More sharing options...
Steveocee Posted December 22, 2022 Share Posted December 22, 2022 Cowcow hammer arrived today from Ebog along with a stainless knocker lock as well (learning from @leadly 's experience). Got a hi capa nozzle valve spring ready to go in, PDI inner barrel, H plate, autobot 60 also sat waiting and CTM 200% recoil and nozzle springs on the way. I plan to get a lightweight BBU as well at some point but these will do for now. Only question really is do I go shotgun shell hpa or m4 mag? Link to comment Share on other sites More sharing options...
Skara Posted December 23, 2022 Share Posted December 23, 2022 9 hours ago, Steveocee said: Cowcow hammer arrived today from Ebog along with a stainless knocker lock as well (learning from @leadly 's experience). Got a hi capa nozzle valve spring ready to go in, PDI inner barrel, H plate, autobot 60 also sat waiting and CTM 200% recoil and nozzle springs on the way. I plan to get a lightweight BBU as well at some point but these will do for now. Only question really is do I go shotgun shell hpa or m4 mag? I'd go shotgun shell because it's less cumbersome but you don't get as many rounds as with an M4 mag. Link to comment Share on other sites More sharing options...
leadly Posted December 23, 2022 Share Posted December 23, 2022 MP5 mags? Link to comment Share on other sites More sharing options...
Steveocee Posted December 27, 2022 Share Posted December 27, 2022 On 23/12/2022 at 07:50, Skara said: I'd go shotgun shell because it's less cumbersome but you don't get as many rounds as with an M4 mag. I bought it with the intention of going shotgun shell but then the thought of M4 crossed my mind being as I bought a set of EPM1S's just to use with my capa so almost makes sense, plus then there's the extra firepower of 170rnd per mag. Whatever happens, once I've done the internal mods, I'm buying one of them. Link to comment Share on other sites More sharing options...
Steveocee Posted January 6, 2023 Share Posted January 6, 2023 Upgrades have started. I went with a 5KU BBU as they're less than half the price of the Cow2 ones and generally in hi capa land the 5KU stuff is pretty decent with good tolerances. Can only echo the same thing. BBU area upgrades are completed. Got barrel/hop upgrades to do and then hammer/knocker before we stick a HPA adaptor up it. Here it is with a 5KU BBU and 5KU magwell. leadly 1 Link to comment Share on other sites More sharing options...
leadly Posted January 7, 2023 Share Posted January 7, 2023 Looking good Steve!! I'll be slapping a longer inner barrel in mine and trying it as a DMR. Couldn't quite justify a full KC02 build, so this will hopefully scratch that itch. The General kindly gifted me a 200 and 220mm barrel to try in it!! Link to comment Share on other sites More sharing options...
Steveocee Posted January 10, 2023 Share Posted January 10, 2023 I've done 2 build/rebuilds in the last week aimed at using at KZ. IMO you don't need a DMR as such for that site, a well set up <350 would be just as amazing. AAP with a Loki and decent carbing setup would clean up if you can get it reaching out. I'll be running the Mk23 there soon as primary. AAP though I'm going to wait until HPA ready and then take it to the Growhouse. Link to comment Share on other sites More sharing options...
leadly Posted January 10, 2023 Share Posted January 10, 2023 You down on the 22nd dude? Link to comment Share on other sites More sharing options...
CheeseToastie Posted January 20, 2023 Share Posted January 20, 2023 Morning all. So I've recently picked up the CTM ultra light bolt that comes with the CTM 200% recoil spring. I was having an issue that with the supplied spring the bolt was cycling so fast that in semi I was experiencing burst fire. Changing the spring to the original AAP spring solved this issue. Just curious if any one else has experienced this? Link to comment Share on other sites More sharing options...
Steveocee Posted January 21, 2023 Share Posted January 21, 2023 On 10/01/2023 at 13:32, leadly said: You down on the 22nd dude? Sadly not. I was planning to be but the kiddo got some tickets to the match today and wants me to take him. I can't leave the mrs with all the kids 2 days in a row 😞 Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted January 26, 2023 Author Share Posted January 26, 2023 (edited) So I'm back in the AAP club after selling my Black Mamba build some time ago. Before I'd fired a shot, I installed a CTM FUKU-2 (great name, huh) trigger, which I really like the look and feel of. However I probably spent more time trying to get the perfect position on the overtravel grub screw, than it took me to actually get the trigger in there. I'm still not happy with the grub screw, especially as it's wobbly and I don't really want to screw glue it. Can someone explain "overtravel" to me and if I really need to use the grub screw? I also don't know whether to keep the upper stock, go for another Black Mamba or a CTM two piece job (although IMO they're overpriced) 🤔 As much as I love the look of the Black Mamba, it did seem to negatively affect cooldown, quite significantly. Edited January 27, 2023 by Cr0-Magnon Link to comment Share on other sites More sharing options...
Terry_Rist Posted January 27, 2023 Share Posted January 27, 2023 18 hours ago, Cr0-Magnon said: . Can someone explain "overtravel" to me and if I really need to use the grub screw? Just means how much further you can pull the trigger once it has got past the break point. If you want to have a super short trigger pull with a hard stop then you can use the grub screw to do that, if you leave the grub screw out then it just means you have more travel left in the trigger once you have tripped the hammer before there is a physical stop to the trigger movement. This doesn't affect the take up in the trigger before the break point so doesn't impact the trigger response on a single shot. Only if you are spamming in semi auto it may decrease the reset time between shots but it is pretty much just a personal preference thing. Cr0-Magnon 1 Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted January 27, 2023 Author Share Posted January 27, 2023 I did actually feel like the gun was very snappy on semi-auto with it in....hmm, will have a think. Cheers! Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted January 30, 2023 Author Share Posted January 30, 2023 What tips do people have for maximising gas efficiency? ie lighter blowback unit? How are the aftermarket nozzle sets? Link to comment Share on other sites More sharing options...
Skara Posted January 30, 2023 Share Posted January 30, 2023 1 minute ago, Cr0-Magnon said: What tips do people have for maximising gas efficiency? ie lighter blowback unit? How are the aftermarket nozzle sets? I say stock is pretty efficient compared to the majority of GBBs (except TM, because fairy dust). I think you can tune the valve to make it more efficient (i.e. pump out only the gas needed to achieve the required energy output and cycle the bolt), a lightweight bolt might help but at the same time I'd be careful with going too lightweight or you may end up with cycling issues like our friend above, especially if you use stiff recoil springs. Afaik the CowCow nozzle is a bit shit, don't know about others (I don't even know if other nozzles exist!) Cr0-Magnon 1 Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted January 30, 2023 Author Share Posted January 30, 2023 OK cheers, gonna stick with the stock blowback unit and nozzle for now. I have ordered the Waldo customs snappy boi thingy though. I've had this new one since Friday and so far have installed a CTM trigger and lower (in Ranger Green). I can see myself getting a new upper and the hop unit at some point...jeez, this is going to be an expensive one isn't it... leadly 1 Link to comment Share on other sites More sharing options...
leadly Posted February 1, 2023 Share Posted February 1, 2023 On 30/01/2023 at 21:17, Cr0-Magnon said: OK cheers, gonna stick with the stock blowback unit and nozzle for now. I have ordered the Waldo customs snappy boi thingy though. I've had this new one since Friday and so far have installed a CTM trigger and lower (in Ranger Green). I can see myself getting a new upper and the hop unit at some point...jeez, this is going to be an expensive one isn't it... Definitely going to cost you a few quid, I've spent loads on mine on never bloody use it 😭 Cr0-Magnon 1 Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted February 1, 2023 Author Share Posted February 1, 2023 3 hours ago, leadly said: Definitely going to cost you a few quid, I've spent loads on mine on never bloody use it 😭 Not going to lie....when comparing them both last night, I did favour how my TM Glock 17 Gen.4 felt in my hand....that and I have about twenty other pistols. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now