Smooth_Operator Posted June 4, 2018 Posted June 4, 2018 Hi all, I've got a real steel Hensoldt dual optic carry handle, which I believe came from a Police Issue G36. It's an absolutely stunning piece of kit and I'd love to use it on a GBB or AEG. Sadly it doesn't fit either my Umarex or S&T G36 though... Has anyone fitted one to their G36? If so, what brand of G36 does it fit? Cheers, Rob
Wo1f Posted June 4, 2018 Posted June 4, 2018 Send it to me and I’ll see if it will fit my WE gbbr ? i do believe it will fit the WE because I have a RS flat top rail that fits just fine.
Smooth_Operator Posted June 4, 2018 Author Posted June 4, 2018 7 minutes ago, Wo1f said: Send it to me and I’ll see if it will fit my WE gbbr ? i do believe it will fit the WE because I have a RS flat top rail that fits just fine. Haha well it is the WE GBBRs that I've been looking at, so that makes me feel much better! Could you do me a favour and measure from the centre of the forward bolt hole to the centre of the first bolt hole at the back? Just so I can compare it to this one...
Archer Posted June 4, 2018 Posted June 4, 2018 Fits the WE G39 perfectly - ran a hensoldt on mine for ages
Smooth_Operator Posted June 4, 2018 Author Posted June 4, 2018 1 minute ago, Archer said: Fits the WE G39 perfectly - ran a hensoldt on mine for ages Now that's exactly what I needed to hear - thanks! G36C, K or E? Just out of interest - I know they're all the same fitting. ?
Wo1f Posted June 4, 2018 Posted June 4, 2018 Sounds like you don’t need it now, but I’ll measure anyway when I get in. Where did you get it from? I want one for mine
Smooth_Operator Posted June 4, 2018 Author Posted June 4, 2018 3 minutes ago, Wo1f said: Sounds like you don’t need it now, but I’ll measure anyway when I get in. Where did you get it from? I want one for mine Got an absolute bargain off eBay. They sell for a pretty penny in the states, but I think I paid £90 for mine if I remember correctly. Seen them go for £200-£300 on eBay over here... ?
Smooth_Operator Posted June 5, 2018 Author Posted June 5, 2018 Just now, johnnyj said: Well i know who I sold it to now Haha nice to make your acquaintance! ?
johnnyj Posted June 5, 2018 Posted June 5, 2018 A lad that did or still does run a site in north wales got hold of 4-5 of them from a pal in the manchester force , I got one sure jez got another also was a good while ago . plan was always to try and get it on a WE g36e as I loved the rifle version but hated WE didnt have the dual optic set .
Moderators Jez_Armstrong Posted June 6, 2018 Moderators Posted June 6, 2018 Had 6 or 6 of these, on Classic army and KWA
Supporters Druid799 Posted June 7, 2018 Supporters Posted June 7, 2018 18 hours ago, Trojax88 said: Well, I did a thing... Sir Weeeeeeet !
FreeFrag.UK Posted February 25, 2019 Posted February 25, 2019 Bit of a necro but does anyone know if these will fit a Tokyo Marui?
BigStew Posted February 25, 2019 Posted February 25, 2019 18 minutes ago, FreeFrag.UK said: Bit of a necro but does anyone know if these will fit a Tokyo Marui? Pretty much all g36 AEGs are clones of the TM so unlikely
FreeFrag.UK Posted February 25, 2019 Posted February 25, 2019 @BigStew - Seems a little contradictory based off of the above the statements but cheers for the info.
1st commando Posted February 25, 2019 Posted February 25, 2019 it fits most as they are somewhat flexible I had a load of them and have fitted them on most things . The hardest to fit on was actually a 22lr G36
BigStew Posted February 25, 2019 Posted February 25, 2019 10 minutes ago, FreeFrag.UK said: @BigStew - Seems a little contradictory based off of the above the statements but cheers for the info. I read the top post which stated it didn't fit a load of TM clones. Did not see the post that contradicted that.
1st commando Posted February 25, 2019 Posted February 25, 2019 7 minutes ago, BigStew said: I read the top post which stated it didn't fit a load of TM clones. Did not see the post that contradicted that. The S&T in the first post were not TM clones
BigStew Posted February 25, 2019 Posted February 25, 2019 6 minutes ago, 1st commando said: The S&T in the first post were not TM clones Well you learn something new every day. As far as I was aware the only difference on the s&t was an addition mag release and the umarex were just 're badged JG.
1st commando Posted February 25, 2019 Posted February 25, 2019 Most Umarex were S&T and Ares back then . The body density and dimensions can vary slightly from one brand to another but the G36 optic has enough flex to fit most replicas . However the 22LR replica actually needed modification which was funny as airsoft guns get the dimensions more accurate than something firing live rounds
BigStew Posted February 25, 2019 Posted February 25, 2019 22 minutes ago, 1st commando said: Most Umarex were S&T and Ares back then . The body density and dimensions can vary slightly from one brand to another but the G36 optic has enough flex to fit most replicas . However the 22LR replica actually needed modification which was funny as airsoft guns get the dimensions more accurate than something firing live rounds Oh I remember an umarex model that removed a lot of material off the body they were garbage.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.