sniperslucky Posted February 16, 2018 Share Posted February 16, 2018 Hi All, Just started to look into getting a gas pistol, ASG or STTI version of the MK23, site states 420fps can this be reduced by changing the internals as green gas stated on website for fps limits or is the fps incorrect , just don't want to get 1st pistol and be hot when other sites state 300-350fps? Thanks for any explanation Link to comment Share on other sites More sharing options...
Albiscuit Posted February 16, 2018 Share Posted February 16, 2018 Under the impression you would have to not use the silencer/barrel extension. I have noticed my TMMK23 on Nuprol green is over my sites 350 limit but switching to 144a gas brings it down enough to be useable!..(nowhere near enough of a reduction to be helpful to you though) Link to comment Share on other sites More sharing options...
Head Moderator Jedi_Master Posted February 16, 2018 Head Moderator Share Posted February 16, 2018 Spend the extra money and get the TM version. Problem solved . Link to comment Share on other sites More sharing options...
Supporters Prisce Posted February 16, 2018 Supporters Share Posted February 16, 2018 My brothers ASG Mk23 is only firing 340fps on green gas with the silencer on. It’s 300 without. My Tm is only firing 290 on green gas. I’m now only firing 187fps using .4s on red gas. Which is still lower than 350fps. (247.48 is limit on .4s) Link to comment Share on other sites More sharing options...
Paltala Posted March 2, 2018 Share Posted March 2, 2018 You could try Nuprols 1.0 gas. It's less powerful than 2.0 (Green) iirc. Link to comment Share on other sites More sharing options...
TARGETSZONE.CO.UK Posted March 2, 2018 Share Posted March 2, 2018 I Think what you are seeing is 420fps with .12g which equates to about 330fps with .20g Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 3, 2018 Supporters Share Posted March 3, 2018 On 02/03/2018 at 9:21 PM, TARGETSZONE.CO.UK said: I Think what you are seeing is 420fps with .12g which equates to about 330fps with .20g Having run two HFC MK23’s (the original OEM for stti&ASG) I can confirm both were doing between 405-415fps on .2’s with the suppressor/inner barrel extender and again both were running between 336-344fps with out the suppressor . Link to comment Share on other sites More sharing options...
TARGETSZONE.CO.UK Posted March 4, 2018 Share Posted March 4, 2018 16 hours ago, Druid799 said: Having run two HFC MK23’s (the original OEM for stti&ASG) I can confirm both were doing between 405-415fps on .2’s with the suppressor/inner barrel extender and again both were running between 336-344fps with out the suppressor . Wow I am gob smacked that's a lot of power for green Gas Link to comment Share on other sites More sharing options...
Head Moderator Jedi_Master Posted March 4, 2018 Head Moderator Share Posted March 4, 2018 That is the joy of non-blow back, the gas is much more efficient and not wasting power moving the slide. Link to comment Share on other sites More sharing options...
TARGETSZONE.CO.UK Posted March 4, 2018 Share Posted March 4, 2018 Ah! I just presumed it was blowback, now I see the full picture Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 4, 2018 Supporters Share Posted March 4, 2018 6 hours ago, TARGETSZONE.CO.UK said: Wow I am gob smacked that's a lot of power for green Gas Indeed ! When we first saw the numbers our selves we were like WTF ! Even with being non blow back to say we were amazed would be an understatement, but after repeating a good few times they were very consistent numbers . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.