airsoftwarrior147 Posted February 1, 2014 Share Posted February 1, 2014 Ok so I've brought myself a 417 in the end but my freinds 7.4v battery will hadly blow air out and neither will a 8.4 the manual says to use a 9.6 but will I get the best performance of that or a 11.1 lipo!Also does anyone know where I can get mags cheap as I've only found them at jd airsoft for 30£Finally what mag pouches!Thanks for helping joe Link to comment Share on other sites More sharing options...
Supporters Del Monty Posted February 1, 2014 Supporters Share Posted February 1, 2014 You should be ok with a 9.6 11.1v tend to be a little OP in my opinion and can result in an eaten up internals. as for Mags try Zero One, does it not take standard M4 mags ? Link to comment Share on other sites More sharing options...
Supporters Esoterick Posted February 1, 2014 Supporters Share Posted February 1, 2014 The HK417 uses proprietary mags. Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 1, 2014 Author Share Posted February 1, 2014 no they have specalised 7.62 style mags and yah i might get a 9.6v for now then maybe upgrade again dunno Link to comment Share on other sites More sharing options...
Moose87 Posted February 1, 2014 Share Posted February 1, 2014 remember if you use an 11.1 lipo you are.gonna need a mosfet. mags are expensive and so are the pouches. Link to comment Share on other sites More sharing options...
CaptainDumbass Posted February 1, 2014 Share Posted February 1, 2014 I recommend a 9.9v LiFePO battery. It is between a 9.6v nihm and an 11.1v Lipo, I use them and they're brilliant. As for mags and pouches, if you want them cheap, taiwangun. Link to comment Share on other sites More sharing options...
Spatch Posted February 1, 2014 Share Posted February 1, 2014 What make 417 did you get in the end? Umarex (VFC)? Be very careful running an 11.1, it's just gonna destroy the gearbox, when you say a 7.4 lipo isn't giving any air, but an 11.1 is that doesn't make sense, the piston is being pulled all the way to the back of its stroke regardless of the battery, battery difference will change ROF and trigger response, not the amount of pressure created by the cylinder/piston The mags unfortunately are proprietary, there's no way around it, and the umarex work best with the proper mags, they fit in most 7.62 mag pouches but some can be a squeeze, WAS and flyye tend to very tight to start with Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted February 1, 2014 Supporters Share Posted February 1, 2014 +1 Spatch - battery voltage does not affect shot power. If it doesn't fire well now, there is something wrong with it. At this stage, don't bother messing with it yourself, send it back and have the retailer sort it out. The mags ought to fit upside down in this type of 7.62mm x 51 mag pouch: ...which are available in loads of colours these days. Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 Captain it is a 7.4 v Nimh Next It is underexposed/vfc and I'm going to buy a bigger battery first as. The NBA are just hopping out if the feeding chamber/hop chamber Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 Captain it is a 7.4 v Nimh Next It is underexposed/vfc and I'm going to buy a bigger battery first as. The NBA are just hopping out if the feeding chamber/hop chamber Link to comment Share on other sites More sharing options...
Spatch Posted February 2, 2014 Share Posted February 2, 2014 Give the barrel a really good clean bud and put a drop of gun oil, not silicone oil as the rubber will swell, into the hop unit, turn the gun upside down a literally put a drop into the BB feed tube, you don't know how long the gun has been sitting so the rubber may be a little hard and needs bedding in, don't open the gun up as it's new, if the manual says a 9.6 nimh then a 7.4 lipo should be man enough if it's a good one with decent discharge (25c) Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 OK thanks also were would i get gun oil from? and can anyoe help me with getting to the rubber as m a tech noob kinda (never opened a gun before) also ive been told to check the serial number and am unsure as to weather this is the numbers above the fire selector or somewhere else Link to comment Share on other sites More sharing options...
Spatch Posted February 2, 2014 Share Posted February 2, 2014 Gun oil can be got from any shooting/country type shop, you don't need to open the gun up and I wouldn't recommend opening it in case it does have a problem and you need to return it to the retailer, once you open the gun you will void the warranty in 99% of cases! give the barrel a proper clean as I said and the oil just needs a drop into the hop, look into the magwell from underneath and you'll see where the bottom of the hop is Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 Googled them but thanks anyway I've don't both still no firing you can hear it cycle but it won't feed, and the bbs just jump out of the hop chamber any ideas Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted February 2, 2014 Supporters Share Posted February 2, 2014 Check the position of the hop up control because it may be at full on. Try turning it all the way opposite. Link to comment Share on other sites More sharing options...
CaptainSwoop Posted February 2, 2014 Share Posted February 2, 2014 As already posted increasing the voltage just increases the rate of fire. If the mechanism is cycling it will shoot at the same power whatever the battery. There is a problem elsewhere if you think it is down on power. Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 Have been told the hop might be out of place or the mags follower Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted February 2, 2014 Supporters Share Posted February 2, 2014 Is it a mid cap mag then, or hicap? It is very possible for the feed tube, which is the lower part of a hop unit and carries BB's up from the mag, to be out of place, but this would indicate that the hop unit was not fitted correctly and/or busted terminally. Did you check the position of the hop control? Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 It's a mid cap and if you mean chafing the hop I've tried it and still nothing I'm really getting annoyed with it now Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted February 2, 2014 Supporters Share Posted February 2, 2014 No what I'm thinking is the simplest problem with hop units - that it is turned full on so the BB's can hardly fit through. Oh yeah, and re the mag follower, when the mag is empty, does the plastic follower press right up into the port where the BB's are held back by the sliding spring catch? Because if it does, there's nothing wrong with it. But I don't see how it could affect the power of shots anyway. Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 Um not really sure but I can try and upload a pic if it helps Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted February 2, 2014 Supporters Share Posted February 2, 2014 Yeah it might help. Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted February 2, 2014 Author Share Posted February 2, 2014 Won't let me upload off phone I'll try tommorow but I'll be taking it to jd airsof on Wednesday to get them to check it Link to comment Share on other sites More sharing options...
Teo Posted February 2, 2014 Share Posted February 2, 2014 Landwarriorairsoft have newly got blue force gear ten speed 417 mag pouches up but they are like 30 quid Link to comment Share on other sites More sharing options...
P2A Posted February 2, 2014 Share Posted February 2, 2014 Landwarriorairsoft have newly got blue force gear ten speed 417 mag pouches up but they are like 30 quid That is not a bad price considering that product trades in at £26.40, if you bear in mind that most retailers would either go trade times anything from 1.30-1.85 or 100% markup. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.