Qlimax

So here's the final product of my SMP. most want a TBB fitted, I did have a 6.03mm but SMP's work better on wider barrels so it now has a 6.07mm Orga barrel with a R hop. New Chrome Speed trigger set to a hair and boy can you tell. silencer does work and makes this bad boy quiter than usual. cheeky tango down grip just bought as well. so nearly a grand later it's here. before anyone says that's near PTW money I know I chose this over a Tac PTW, i did have one on order but wanted this instead.

Colemans Propane is brilliant this time of the year.

I don't think there is a UK supplier of the Tippmann yet, the only problem is nothing bar the Stock and RIS is changeable

I trailed one of these before getting my SMP unit and defo prefer the Wolverine SMP. Currently these are only available in he USA and is only available in the M4A1 version. Nice little piece of kit but was an easy choice for me as I am not a fan of he long barrel M4.

I wondered about that one myself

My new G&P EOD M4. I like the markings on this and defo like the selector ones

£350 depending on how well its been maintained..

here's my poor attempt at the review of my SMP. http://youtu.be/as7wb6wQ03Y?list=UUNczICeYbDk2JdW1OCYZIkg

Get some prices then run them by me mate. I can get you everything for £460 posted from the States

So for your first question please see this link, this is what I have been doing for myself and others to show hints on the SMP as information available is extremely limited . http://youtu.be/9AwN94oxj28 Your third question I have answered the filling part already and for managing your PSI that is done on your regulator but only need to set this once for your desired Fps and its done, mine is currently at 80PSI doing 335Fps. Your second question. I have a Redline Regulator with a straight control line as I run it through my shoulder strap on my DCS. Redline regulators also have the tournament lock on which is required if you wanna use the SMP on all UK sites. As for a bottle your SMP comes with a Guarilla 48ci 3000 PSI bottle well mine did but that depends where you get it from. You can PM me anytime for help with purchases or anything.

I'll correct you there, it will fit in ANY V2 or V3 gearbox as long as it's a full shell box but you have to know which box it is you have before buying dos these come in a V2 & V3 version http://www.airsoft-forums.co.uk/index.php/topic/23827-wolverine-smp-fitting/?p=172581

£35 is zero on custom fee £36 up then charges start getting applied more expensive the item the higher the fee. Airsoft peak are a better choice if they have something you need if you use their ASP postage

The wolverine SMP is a great little system, easy to install. The SMP fits into a V2 or V3 gearbox only. Unfortunately though you won't be able to avoid maintenance like any weapon us Airsofters use maintenance is requires but every 50-75k of BBs fired depending on conditions you play in. Maintenance is extremely easy to do and takes 5 mins to do what's needed. I did a clean of mine today all in all it took an 1Hr to strip down clean and rebuild. As for running, I have a supplier that can supply everything required to get it up and running. It uses the following bits. SMP Unit ( FCU, battery) Regulator Control line HPA bottle It all has to be tuned once installed using the FCU and a chrono. For the hop chamber & air nozzle can you post some pics for me to look at. If you go into the Custom Guns section and Other I have a thread there for the SMP. Mine had a problem and haven't used it yet but was an easy fix. I've had to learn quick with mine and install it all myself as long as you have knowledge of getting into a gearbox your good to go. Also having your bottles filled may be a challenge, if you have a local paintball site or you know someo e with a scuba tank your laughing. I personally have bought my own scuba tank and filling station one less thing to worry about.

So as I said I would. Here is a quick maintenance video on the SMP. Again I am working in the dark as there's not much help out there but I can confirm these steps have made it run loads better. The Fps is more consistent but will have to wait and see on the air consumption. http://youtu.be/9AwN94oxj28

if your comfortable going into a gearbox you can do it bud, it's pretty easy to do.

You want a hardwired if your planning on running an 11.1 Lipo. Plug n play is more to change your fire mod than anything else where as a hardwired one helps with the trigger contacts. I personally used an active braking on off ebay called AirFet and it's been brilliant had it nearly two years without a fault.

If you read his thread properly it clearly says PEQ BATTERY BOX WITH WORKING RED LASER. And I would imagine the helmets will be plastic for that price

You should somewhere between 2-3k on shots depending on your setup. I am using he standard G&G Tightbore barrel 6.03 which I'm now told uses a it more air. Not sure on that I know 100% First & Only have banned them but they are gay so foooook em lol. If you have a tournament lock on it like mine then NO site should ban it as it runs the same as a Polarstar which all sites allow so I am told. I need to strip and clean to rule out the air issues then after that we can look at other issues if any. I should be going a game day in the next two weeks so I will get some footage of this running.

its working now and on full auto but makes me wonder plus something is wrong with the amount of air it's using so going to take it apart and clean/lube then test it all again. just on testing and set up I've used two 48ci bottles which isn't good

Yeah had a look at that one but it's only a strip down from he gearbox he doesn't enter the SMP unit it self :-( thanks though bud it is appreciated.

I can't find the video buddy. Can only see two which are reviews. :-(

So I have been playing with my SMP yesterday and been doing some research on this. So at the moment mine is using more air than I imagined which got me thinking. So it appears using an SMP in a CBQ sized M4 is a bad thing shorter the barrel more air has to used and it would also appear the tighter the barrel more air is used as there's less room for the air to travel. Mine has also developed an issue with the Full auto mode, after troubleshooting this fault I found there's a number of issues to look at the rule everything out, mine was simply the ROF was to high as in full it would only fire 1 BB then just blast air out but if it weren't thr ROF I'd have to strip the weapon down and clean the solenoid and lube the air nozzle which I am going to do anyway. Now with this system being kinda new finding videos or answers on how to do a strip down and clean is NONEXISTENT so I will do this but being unsure of this I am not sure how this will turn out but if all goes well at least they'll be one video out there for owners of this kit. I will be doing a full review of pros and cons of this system in the next few days as there's afew things that need pointing out and it will be good to show people a close up of the FCU and some functions. Unfortunately I won't be doing a fire test as until I've taken it apart and cleaned/lubed it all I don't want to run the risk of causing any damage but testing video will follow more than likely of it being used on a full game day to see how it actually runs out in the field.

I love woodland the site is play at is 100% the best woodland site I've played at so far but I do occasionally enjoy some CQB as well. S.W.A.T Liverpool is a quality CQB site and I've played at Urban 6 but don't like it for a number of reason, whilst the site is brilliant for it there's other factors I belive are stupid and not player friendly.

yeah total joke isn't it by the grange only got it as the delivery delay was made out to be longer and wanted to check that my SMP actually worked......

Well it would appear that e US supplier I got my plugs from was wrong about the delivery time. So I pay TheGrange £26 for a plug so I can get my SMP running and today my two new plugs arrive lol... Not bad turn around