Davegolf

They don't really need upgrades, but it's well supported now that it's been out for a while if you're that way inclined. Why do you want to re thread the reciever? Accepts many rail and RS milspec stocks out the box. Beat me @Wo1f! but carrying on, VSR buckings are better for GBB than AEG too, take more nozzle insertion beasting and give a better seal.

Mmmmm excitement at home! Thanks for people's AK insights, so chuffed with this build wise, the finish and fit really is lovely, nice that even the little bits are machines not cast from pot metal! Also maintenance guide and the tools to do it included!

Mmmmm excitement at work!

@RossF Be careful, it may not identify as a he or she 😱

Probably the SixG nub causing issues 😂 No seriously work backwards, with stock parts until your problem is rectified, then go forward again with the knowledge of the what part has caused your problem, you can then tune that part to actually work. As said by @RossF the MPA is a prime culprit, once you start messing with gas volumes and timing it creates all sorts of fun things to tune out - put the stock nozzle back in and test again.

What FPS was his sniper? C02 runs at much higher pressures so I can see where he's coming from but back on green gas etc you don't really want to limit it, and longer barrels hurt accuracy in airsoft.

Have you ever moved your buffer tube before? Have you removed the buffer and spring, are they in good condition and slide freely down the buffer tube? Also the buffer bumper/plunger. What FPS is it shooting at? Is the piston seal in good order / lightly silicone greased?

Just sign up to UKASA Clearly missed this one, WTF were you attempting to do!?

@rocketdogbert Didn't you just trade yours away lol!?

£350 of mags 😱

Just ordered a set for work too

@PopRocket123 is building an armoury

Not a probelm, Itll work harden over time, more powerful gas will beat it a little harder mind. This is prob the worst bit about a lot of 'lightweight' ally bolts, they get mashed to hell.

£££££££££££££

Cheers.... goes and sulks

I've just been refunded so I assume the handbrake is firmly on now then. Damn it!

Not a chest reg exactly but the Tactical Tailor MAV 2 are great bits of kit, especially if you get the additional optional yoke. As above running balanced weight on the back, I.E. hydro really helps. Otherwise run 4 mags and a bottle of gas / BBs.

That's pretty impressive, sure the vibrator lovers won't like the lack of recoil though

Cool, I really need to play!

Faggot

Stocks = MILSPEC Grips = STANDARD AR

A loose loop around the stock is usually the ticket, it can move/rotate freely when you dip the back of the rifle down to transition. So you only need a front sling mounted behind your foregrip/barrel hold to stop tangling

Have you lost the hop wheel detent spring? Or has it failed / got silly weak? Due to the design of the MWS hop system the only way it should be able to reset the hop setting would be if something were rubbing the hop adjust wheel, is the nozzle / BCG clearing it ok? Fitment is the plague of aftermarket parts, its worth spending time with wet&dry paper making the nozzle move freely without lube, any kind of binding affects BB loading/nozzle seating/nozzle retraction/gas efficiency. Thanks @Sawyer always happy to hear players are enjoying the products 👍

Very nice! All works really well together, visually and ergonomically by the looks of it! The FSP suits it. What tape is that on the grip etc?

🤣 rumblepack! I'm sure you have to be a certain age to know what one of those is these days!!!