Jump to content

Terry_Rist

Members
  • Posts

    36
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    0%

Terry_Rist last won the day on December 6 2022

Terry_Rist had the most liked content!

Profile Information

  • Guns
    RDB17, SOC-AR, P90, Cyma M4, Various pistols.
  • Loadouts
    Chest rig and shorts whatever the weather

Recent Profile Visitors

1,038 profile views

Terry_Rist's Achievements

  1. Thanks for clarifying, I thought that would be the case but didn't want to give false information based on an assumption and no experience. It explains why there is no settings in the perun to disable the feature electronically.
  2. I have hacked up an ETU++ in the past to work in a P90 with a warhead brushless and it works fine (this was before they released the P90 optical mosfet) The only thing I am not sure about is if the Perun ETU still allows you to use the mag cut-off feature? I haven't installed one in a replica that has a mag stop so have no idea how the mag stop functions and whether it is a mechanism linked to the trigger contacts or a separate switch via the control board, but probably worth checking that it is still supported beforehand if that feature is important to you.
  3. Terry_Rist

    UKARA

    The UKARA just is a way for retailers to validate that you have a defence to purchase a RIF. Otherwise it would be almost impossible for retailers especially those online to make sure you had a defence and they weren't risking breaking the law by selling to you. It was set up separately form the VCRA legislation by the retailers as a way to protect themselves from breaking the law and ensuring that who they sold to did have a valid defence. You can still rent, borrow and play with a non two tone RIF at an airsoft site without the UKARA and some sites will sell you non two tone guns if you are there playing as they count that as a valid defence.
  4. The problem with the UAR is that It is built to such a tight budget that the bodies on them are really horrible and plasticky. They don't -and never will- feel like a solid platform. Other than that they can be upgraded performance wise to whatever you want, relatively standard V3 platform underneath it with a trigger linkage. I loved my RDB until the mosfet shat itself, and the reliance on a magnetic sensor not a cut-off lever made it almost impossible to get a custom mosfet working for me. I actually have another stock mosfet on the way to fix it as it has just been sat in bits underneath my bench for months. Yes I did have to upgrade the piston, piston head and nozzle out of the box just to get a decent air seal, and then fucked the mosfet probably by using a high torque with strong magnets which has just caused it to go haywire. Externally and ergonomically it is fantastic though, one of the best bullpup platforms.
  5. IF it were me, I would shove a V6 in it. You should have enough room and this allows you to use the standard P90 hop unit which will save you a lot of time and hassle trying to get a 3D printed unit to work. My version of we have Bren Gun at home...
  6. I would advise changing the spring, putting it back together and making sure it still works before diving into anything else 🤣. Other than getting serious and opening up the gearbox to change parts inside, the only other things you may want to look at upgrading if you aren't happy with the performance and consistency are the hop rubber and the barrel. Both of these depend on how good the stock performance is, and I am a big believer in 'if it 'aint broke don't fix it' because you are just as likely to make it worse and then have to spend ages fiddling to get it to work properly... don't ask me in how I became an expert in this.
  7. Yeah added an Edit because I did find one complete in stock but it is more expensive than I remembered seeing it. I have to say I am impressed with the M14 platform for its performance in range/accuracy. Out of the box the shoot stupidly well and consistently compared to other options in the price bracket. A lot of people are put off by the difficulty of getting parts and the hassle of working on them which is fair enough, but if you can persevere past those drawbacks they are a great and underrated platform in my opinion. I can't believe how difficult it has become to get replacement parts for replicas in the past few years. I thought I used to be able to see hundreds of stock furniture parts as spares or replacements listed everywhere, now it seems to be the case that you have to ask a retailer nicely if you can get them to order it in and hope they can. This isn't helped by brexit and the high shipping costs from Asia now either.
  8. I am sure I came across they CYMA variant in stock at a reasonable price a couple of months ago when I was buying a standard M14, I now can't remember/find where it was or maybe they have already sold out. Not a massive fan of the looks of them personally, but they definitely aren't common I will give you that. Not sure if people didn't like the look of them or what, but I guess they never sold that well. Having the EBR style motor housing stops anyone just buying a replacement stock to switch between that and standard without having to switch parts of the gearbox as well otherwise you could just run one set of internals/receiver and switch between which one you felt like. Edit: found one in stock on BBguns4less, but at £190 it is considerably more than a standard new CYMA M14, maybe i was misremembering the price.
  9. An M130 spring seems excessive with only 4 teeth removed. That is the same short stroke as as stock CYMA platinum and mine gets to 340+fps with an M110 spring. I have others that I have short stroked with cut down M120 springs, but never had to go as high as M130. All springs are different in airsoft, there is no standardisation across different manufactures, even within the same manufacturer you can sometimes get ones that don't match up to what you expect.
  10. I never run a 'DMR' so it doesn't affect me, but I always wonder why anyone bothers at sites where the limit is only 50 fps over a normal AEG. I can't believe that you really get that much extra range and you are still stuck with the disadvantages that come with adhering to DMR rules. 425-450 makes more sense in terms of limits to me, if you go all the way to 500fps the people with bolt actions get salty that they are now the ones at a disadvantage when you take away their high joule monopoly, some sites seem to get away with doing it though.
  11. Yeah I agree. Site design has a big part to play in this, but it feels like at a lot of sites the cover can be placed just out of range of the rental/ stock gun performance and just within range of really well set up replicas. This leads to a huddle of players behind both barricades just sat there unable to push up because there is no more cover and unable to take each other out because they don't have the range. The people with worse performing guns end up getting stuck in stalemates all the time and can cause a lot of the 'they aren't calling their hits' when they see some people can shoot that far and believe with the amount of shots they have put at the opposite cover there is no way that they could have missed even though they're just not reaching out that far. Good layouts should have some areas at longer range like this, but they should also have alternative routes with cover stacked a lot more densely to allow those without the range to move up and not get stuck in a stalemate. It isn't just rentals and new players that this affects, anyone that wants to run anything that is 'sub optimal' say a spring shot gun (heck even a gas shotgun that hasn't been HPA tapped) or some other obscure replica that is fun to use but is never going to match the performance of the completely upgraded M4 platforms. Ideally Sites would be set up to offer opportunities for both longer range slow playstyles but not discourage people pushing up and keeping the game flowing. Now when I get people come along to play airsoft for the first time I tend to lean towards suggesting going indoors because it removes the element of new players being stuck or unable to play because they feel like they don't have the range to compete with the regulars. Yes they can still be overly cautions and end up stuck places, but that is just a mental barrier to overcome not a physical limitation of the range on the replica that they are using. I will say that this is different for some big outdoor fields that host much longer games, but the ones that cater to generic weekend woodland skirmish's should try and do as much as they can to equalise the discrepancy in range and accuracy between those who have dumped thousands into their kit and those who have turned up with their mates for the first time and just want to have fun running around with a rental G36. Maybe it is just rose tinted spectacles, but I am sure that people used to have more variety of guns that they ran. The M4 platform was still popular, but now it can seem like 90% of the AEGs at a game day are an M4 variant of some kind. I somewhat understand, but it still makes me a bit sad when there are so few people I can talk to about their interesting primaries. Even some more people running AK's would be a start but they seem less and less especially as a starter gun, more and more start with an M4 rather than the AK or G36 or even MP5 that used to be more common I am sure. The whole YouTube thing bothers me because it is so far removed from what an actual gameday is like. It isn't even the fact that they cut out most of it and only show curated parts, they have to make content that is interesting to watch after all. It is that the stupid stuff they do and pass off as normal, glorifying cheating/cheater justice, making it seem like they are only going for headshots, staging things for better content or focusing on drama on/off the field gives airsoft a bad name. It makes it look like the wild west for people who have never played and gives the impression that everyone is angsty and against each other all the time. Most airsofters are nice friendly people who will help you out in the safe zone, talk about their cool kit and gear and are there to have a laugh and have fun. I guess people just hanging out, having a few laughs and a good time doesn't make for good clicks and you have to focus on the tiny amount of bad things and arguments that do happen. Also people turning up to just take pictures for their social media are just mildly annoying. So long as they aren't affecting the game play and keep them selves to themselves I don't have a problem and can't complain. But if you turn up to pose in the safe zone, then go out and pose for your mate or girlfriend to take pictures of you in game and don't actually play and then leave at lunch time why did you bother even turning up; also who is even looking at what they are posting?
  12. Probably the only time you will confirm if a site actually has the proper cover is when the worst happens and you need to rely on it...
  13. I bought some red retro-reflective tape and wrapped it round the centre of my BFG. You can't see it when it is in the pouch, but makes it noticeable enough once thrown, either outside because of the red colour of the tape or in dark areas it is easy to see the reflections when sweeping the area with a torch. I also have my name and mobile number written on the side of my grenade in silver permanent marker, just an extra level of insurance in case I do loose it and someone finds it at a later date.
  14. This is completely true. Even If I had a super accurate laser gun with sites 100% dialled it I think most of the time I pull the trigger first rather than lining up my shot to deliberately aim at someone's hands. Whenever I get sot somewhere particularly painful that is what I attribute it to with who ever shot me. I doubt they spent ages lining up their shot with malice to shoot me right on the knuckle, it probably just happened to be what ended up getting hit as they shot at me as a whole.
  15. No problem, Hope it all goes well for you. One thing I just realised is that I am not sure the upgraded spring guide you have will work. As far as I was aware the Double Bell Scar has a quick change spring system and the spring guide you have listed is the normal type. It is worth checking at least before you buy what your gun has, it looks like it may even come with a metal spring guide with a bearing already installed in which case there may be little point to changing it. I usually only upgrade a spring guide if it is plastic from stock and doesn't have any form of washer or bearing on it.
×
×
  • Create New...