JimFromHorsham

Upper / lower / handguard etc this is where to me it’s shining , it’s really nicely finished , trademarks are crisp , the rifle while light is solid and very robust feeling ( apart from those sights and stock wobble ) barrel to receiver fit is good with no movement , handguard is again rock solid as you’d expect .anodising throughout is clean and in my opinion high quality , a nice satin sheen . I would say in this regard the overall feel of it is on par or better than a TM rifle .all screws , pins , mag release , fire selector , castle nut are steel . Tbc Standard WE 2.0 yields an average 290 fps with .30g BB , overall so far I like it , it’s what I’d call a petite rifle , the super slim handguard really makes it feel different , minimalist and light . so if you are looking for something different to a MK18 or URGI then this could be just the ticket for an out of the box platform it’s pissing hard here at the mo so still no proper range test but semi and auto are very good , running from beginning to end of the mag with no noticeable cool down , firing cycle is pretty sharp and trigger feels good compared to my WE rifles . some fancy pics will report back once I get a proper chance to shoot it 👍🏼

Ok , I’ll keep It brief for now and a “first impressions” rather than a full strip down . It’s worth me noting that I do not have a TM MWS here next to me for a direct comparison but I have had a bit of time with them here and there , WE M4 platform GBBR is my main go to for my collection purely for ease of parts and selection . And Tokyo Marui for pistols .However I’m hoping to have an MWS on loan so I can perhaps do a few side by sides but no idea when then might be , likely end of the month . The box - standard issue , cardboard and foam , silica packs . Nothing about this is TM , think King Arms . It’s a box to get the gun from A-B. Although nicely printed. inside you’ll find the rifle , magazine , iron sights ( we shall get to those later ) , speed loader adapter and a baggie of words . magazine looks pretty decent , not as nice as the guns modify and I suspect these are Ace-1 arms ? RS Ranger plates do not fit , however looking around they can be had for £35-£40 ish from HK so if they hold gas and feed fine could be a cheaper way of boosting that load out . feed lips and router look pretty good , speed loader adaptor is a perfect fit to a TM loader and loads the magazines beautifully Tbc. Stock is a Magpul clone , a little wobbly on the tube nothing that couldn’t be shimmed so standard airsoft really , RS MOE-SLK fits very well and the rattle is reduced by at least 50% .(pics later ) grip is a Magpul K clone , nicely made , no branding and I will test fit a genuine one later . iron sights …. Ugh , horrible cheap plastic , wobbly , grim . A real let down . Fitted for the pictures but they will go in the bin tbh . steel flash hider is nice quick break down , upper to lower fit is excellent , no play whatsoever and the pins are lovely and snug needing a pin pusher to release Bolt and buffer assembly all seem pretty decent , a magnet over the trigger group shows alot of steel parts bolt is nice , all seems well fitted together ,although it was very dry so gave a quick wipe over with a light oil , spring is fairly soft , cocking the rifle the return is what I’d describe as lazy but this may be because it was dry and not run in . tbc.

Peanut buttered an LMT

you’ll need to file / grind them off .

for some people the interest in firearms and collecting goes beyond the actual pew pew , they aren’t doing it for anyone else they are doing it because in the whole it’s a difficult challenge to piece together and satisfying once you get to the end . It’s a shame but for some reason there is way more negative “judgement” on people putting a lot of effort into their builds than there is in reverse . Just reading this thread tells you that those people are the first to try and offer advice and help to anyone else wanting to go that route 👍🏼 each to their own of course 🍻

Managed to get hold of one , will try for play time & update later today

following UKSF is like following apple products , just when you think you’ve got the latest ….. 😭

no , it’s put up it for sale and tell everyone that the paint could easily be removed 😭

400ml Military Style SPRAY PAINT (Army Spray Paint - Panzer Grey) https://amzn.eu/d/i5tb744 sorry , wrong one , 400ml Military Style SPRAY PAINT (Army Spray Paint - Grey-Blue) https://amzn.eu/d/3mCcvCi

First step - which SF Unit shall I clone ? Second step - which era ? third step - start reading . fourth step - how accurate do I want to be ? Fifth step - start spending , be happy .

i bought a few sets from Ballistic designs when they were still running , you could try contacting them but I think they are out of stock , possibly not trading any more .

adhesive vinyl stencils , inbetween the colours This one for example , base coat black add first stencil layer then overspray with olive , next stencil layer overspray with grey then some light dusting of black to blend a little , leave to dry , peel & reveal Optics & accessories to match / same method

tell Me more , with more pictures and maybe a video 😛

Not airsoft but here’s two of my air rifles I’ve done , just Krylon & stencils then a clear coat over the top

If everything is working , clean , tidy & boxed I’d work on 3/4 of new retail price ( forget any labour for custom work ) but expect a little haggling , if your wanting quicker sales then go 2/3rd from the off . broken , faulty , missing parts , modified beyond being able to put back to OG , painted etc then expect less .

In U.K. ? highpressureairsoft and JDAirsoft both showing available to order , https://www.highpressureairsoft.co.uk/emg-noveske-n4-gbbr-mws-system-by-double-eagle https://jdairsoft.net/emg-noveske-n4-gbbr-mws-system-1

Your friend doesn’t sound like much of one, no one spends 3k on an airsoft gnu and doesn’t remember what they did or who did it, any tech doing that kind of work keeps a record of it for warranty . on my old phone , can’t remember? oh dear . At a guess , with zero factual info other than it’s been messed around with in a previous life and ANOTHER tech has fixed said mistakes then I’m afraid it’s just another 417 recoil . £300-£400 , maybe 🤷🏼‍♂️

Yes , it’ll still be 100rd mags under the top cover 👍🏼

What torch do you have fitted ?

Couldn’t resist it , the calling for a full metal kit was too strong , got some more steel parts on the way from HK too

https://www.octagonairsoft.com/product-page/double-bell-p90-pink-aeg-的副本 cheap fix 👍🏼😎

And fitting this AA DD416 rail , barrel nut & upper receiver threads took some fettling but go there in the end WE GBBR base