JinxDuh

M90 is nice, but 4th for me is AUSCAM 😂 Although, really... Anything that isn't multicam 😂

https://www.ebay.co.uk/itm/184417993754

If there's no screws left over at the end 👍 If there's screws left over but it goes pew 👍

3 out of 4 of my favourite camos all in one pic 😂

It's not even straight...

Awesome, thank you! I know 0 about suppressor makes so I had no clue 😂

Big Resident Evil fan and recently got myself a Krink (Thanks HuttArmouries) and figured I'd make a dragoon build. I've sourced and got every other part ordered, except from these... The torch mount And the suppressor Any help is massively appreciated! Update: I've found the torch mount, just need to ID the suppressor now.

The two toned wa2k 😭

Can confirm KA SAA sucks, massively.

He had it in the appraisals before it was posted here too 😂

Update: I followed the video, thanks Gavin. I put some coins in, wasn’t enough. So I stuck an AEG gearbox Cylinder behind the resin block and now it’s returning too fast BUT it fires!!!!

So, it wasn’t the issue. Even with the buffer tube completely off, when I manually pull the bolt back it gets stuck in the same position… I’m lost for ideas ☹️ If I move the upper receiver slightly the bolt can be moved back, it’s like it’s getting stuck on the actual receiver. So far I have: Taken the hop up out, it got stuck. Removed the trigger box, it moved freely Made sure the box is seated correctly like in videos, still got stuck

Because usually DCA comes up before a lot of other sites, and as he’s called it multiple times before he adds “cunt tax” for people that don’t shop around. Plus greed. Mostly greed.

So it turns out after speaking to my pal I got it from, the muppet swapped out the WE buffer for an S&T one which is a different shape and made out of plastic. I didn’t think about it, and just assumed it was an older WE as he did say he had it for ages. Didn’t want to send to China again for the 7th time for a few parts, so ended up getting one of the Guarder ones https://www.fire-support.co.uk/product/guarder-recoil-buffer-for-kscvfcwe-m4-gbb-fixed-buttstock-2018-new-version Hopefully that should solve the problem and then I’ll finally have a working, slightly upgraded M16A1!

I dropped this kit into my xm177 (Converting to an m16a1) and the new BCG will fire once and then the whole bolt gets stuck back. I have to remove the entire buffer tube to then remove the buffer spring etc to then take the bolt out. My initial assumption was: The retainer pin was too far up, so I tightened it all the way and it still had the issue. I'm wondering if there's a difference between the m16a1 buffer tube and the xm177 buffer tube and there isn't enough "springiness" to send the bolt back... I've never encountered this issue before, so I have absolutely no idea what to check for or what could be the cause

It would also help the site owner/staff I feel too, if they see it is possible and can run smoothly then it’ll be more likely open the door for other people with similar situations.

My main concern would be the kind of thing where for example a player has lost his eye pro out in the field and everybody is shouting blind man, and he’s still moving around looking to shoot at people because he’s not aware. Also hit calling, sometimes you don’t feel the hit but hear it. Airsofters tend to get annoyed at hits not being called, even if accidentally. If he had for example a plate carrier on and he got hit and didn’t see the bb bounce off of him I would assume he would carry on like nothing had happened. And marshals not being able to communicate with him if an issue was to arise. Obviously it’s a really sad situation, and like above I think everybody should be able to partake in the hobby regardless - It might be worth (as again stated above) doing a smaller private game with him so it’s easier on the staff to keep an eye and with people that are understanding of the situation as to not soil his experience.

And then made ever so popular by Garand Thumb, when everybody and their Nan was looking for the rails 😂

Absolute legend, thank you so much!!!

It's close, but the B&T one is in the middle. Yeah, I'm aware they have them but it's a bit much imho once shipping and fees are added! Got a few of those knocking about, the Bundeswehr G36KA4 has a specific rail mount for their A4 rail and because I want to be as clone correct as possible, I may have to suck it up and get the proper thing 😂

Unable to take a picture of the pew because I can’t work out how to get the launcher off yet - but it’s part #150