Jump to content

JVacation

Members
  • Posts

    144
  • Joined

  • Last visited

  • Feedback

    88.9%

Everything posted by JVacation

  1. The quietest aeg that you can make is most likely something like an Aug or previously mentioned an F2000. The gearbox is very enclosed and the areas around it can be padded out with foam and etc for further sound proofing. Although that's only if all variables between all the different aegs are constant. Noises come from every single part of the gearbox. The motor, gears, piston, piston head and cylinder head slapping and other bits. The fact is if you take 10 aegs out of the box. All the same model and from the same manufacturer you will find each one sounds different
  2. When I wrote this post a couple days back I did not expect it to cause so much traction!
  3. I still think the best and easiest way to do it is: 1) Player goes to chrono and says what weight they are using 2) Marshall chooses a random amount of shots through the chrono 3) if all readings are in the limit; remove the mag and take a sample of bbs. 4) Weigh the bb on some micro scales (your typical drug dealer scale haha) 5) Approve the player if weight matches Yes this can be somewhat cheated still but it makes it far harder
  4. That's not true. If you turn up to the chrono and say you are using a 0.2g; the fps limit will the be 350 with joules at 1.13j and that's what the person doing the chrono will be checking. If you have a mag of 0.32g instead which is firing at 350 fps the joules is at 1.82j Unfortunately it happens
  5. In reality it is quite easy to cheat the chrono by just saying you are using a different bb weight than you are actually using. Some sites make you chrono and then take a single bb from the mag you used and weigh it. I understand it would take longer but it is something that would be good to see become the "standard". Thoughts?
  6. You can try leaving it pre-cocked, just be careful with it and don't leave it too long. The main thing to remember is that chronos read differently between each other. Even the same brand and model can read differently. I know that my chrono reads about 10 fps higher than the one at my normal site. No real idea which one is correct. If you can't get it lower by leaving it on pre-cock you can also try changing the springs or shortening your spring but I don't think the arp 9 has a straightforward spring change. Another option is looking at the bore and length of your inner barrel.
  7. Do you know which mosfet is in it? Some have cyma oem ones and some have eshooter in it.
  8. If I remember correctly they had a bit of a falling out with Warhead in general. I think it was due to the people at Warhead UK thinking that the support from Warhead global was inadequate and then warhead global tried cutting them off. Luke was posting stories on his Facebook saying that they were still offering support to customers regardless. Please correct me if I am wrong, I am only going off on what I "some what" remember and I apologise if what I'm saying is not 100% true.
  9. I've had it work on Cyma triggers so would assume it would work on quite a few. You are right though mentioning the metal content. AK triggers are in general a pain, The Perun Clicker does help a lot though if you are running a perun.
  10. A little trick with a V3 trigger and for other things. Use neodymium magnets to aid in holding the trigger in a little bit. Pop them on the opposite side of the case and most triggers will get held in by them. Also really handy for holding the anti reversal latch in.
  11. The annoying thing about LMGs in the UK is that the majority of sites do not have rules where they benefit over your typical assault rifle. I know Rift allow a little increase in joule limit and a longer full auto when mounted but it also introduces an engagement range. You also have to carry a sidearm due to most sites having semi auto only areas and under 10 metres.
  12. I wonder if the Cyma platinum v3 has been fixed yet. The first batch the 1st tooth of the sector gear would clip the 2nd tooth on the piston slightly. In theory it should be fine but not the quality you would expect from their platinum series.
  13. This advert is COMPLETED!

    • For sale
    • Used

    Hello, Selling my E&L Essential AK74MN which has been upgraded by Negative Airsoft. Features a Warhead Motor, Rotary hop up, Perun V3 Hybrid and the one of the first Perun V3 Hybrid Clickers. Has had the whole works on it done inside too. He has also made it easier to access the quick change spring. A video on the RIF is shown here: https://www.youtube.com/watch?v=Xprb-NRddx0 Also happy to share more photos, videos, chrono if needed. Comes with original box and original mag. Looking for £285 Postage will be £15 as it is quite heavy and done via Parcelforce.

    £285

    Stratford-upon-Avon

  14. Yeah just hand tight until it stops twisting on. Usually it will twist on easy at the start, then get a little harder stop until you are met with that "brick wall"
  15. The issue with TM is that they are designed for a specific market. Majority of that market is in Japan where joule limits are quite a bit lower. At that limit they are likely to last but once people start demanding more out of them that's where they start to struggle...
  16. It's a shame that there is no real benefit to using a LMG over a AR with a drum mag. I wonder what sites could do to try and encourage them.

    1. Show previous comments  7 more
    2. pyromancer6

      pyromancer6

      It's a shame box mags are just so wank unless you spend a fortune on one - it's much easier to get a ARP-9 or M4 to feed and fire on a drum then it is to get anything A&K or similar flavoured to feed correctly because, well - support gun activities :P

    3. Arclaw

      Arclaw

      Anecdotally, the brick-style gearbox used by most proper LMGs is more robust to long bursts of automatic fire than a V2. The thing is a pretty solid lump. Using an LMG like an LMG- for suppression-  I can trivially go through 5000 bbs in a day. Would a V2 have a problem with that?

      That said, I can attest that LMGs are the kit-cars of airsoft guns- you spend more time tinkering with them than driving them. And yes, I spent a lot getting mine to a usable state, including a new box mag. It's a labour of love...

      Having a big mag is only half the picture, you have to be out to play a suppressive role to make use of it. I have a hunch that being less mobile might help you stay in that playstyle by reducing the temptation to rush in with the rest of the team. I was supressing a base that was being attacked by our team the other day, and supressing fire was really helping keep the defenders down and our team advancing. When most of our team had reached the base and were moving to CQB to clear it I judged victory and made the poor decision to move up. It wasn't more than a few minutes before the defenders were back firing from the points I'd been suppressing and we were all our way back to respawn.

      The site I play at most often only has one distinction for LMGs rules wise, which is permitting longer bursts not fired at specific targets. I usually feather the trigger anyway, so this doesn't do much for me.

      Another site sometimes has LMGs-only full auto rule for some games that have a mix of close and open spaces, with the caveat that LMG users can't enter the close spaces. The LMG shines here, and it's a lot of fun, but it can lead to confusion/rage (No Full Auto!).
       

    4. Tactical Pith Helmet

      Tactical Pith Helmet

      Gunman use only the LMGs can use full auto rule.  

  17. @pyromancer6 regarding the hop unit and maple leaf. Barrels have a tiny amount of deviation in dimensions around the window. Some barrels go into the hop unit a tiny bit further than others, not much at all but means that the bottom lip of the maple leaf bucking goes too far into the unit meaning it blocks the feeding tube of the hop unit. To test this assemble the barrel, unit and the bucking as you would and flip it over so the tube which makes contact with your magazine is pointing up. Drop a bb down it and see if it goes all the way into the unit. If it does then it's all good however if it gets stuck halfway use something to test the resistance to push the bb into the unit completely. If you feel any resistance at all you will need to shave the bottom lip of the bucking a tiny bit just to give more space for it to drop.
  18. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • As new

    Looking for some handguards that would fit a E&L AK74m. Open to different styles and looks. Let me know what you have got and how much you are looking for it. Thank you

    NO VALUE SPECIFIED

  19. Just take it nice and slow. Will be the opposite side to the patch. Keep testing it by putting it back in the hop unit and dropping a bb down the feeding tube. As soon as it passes with no resistance you are good.
  20. @Pollynator_bravo2 - The maple leafs are too long for the DE hop unit. You can probably shave the bottom lip a little bit though which should resolve it.
  21. Think I made a topic on this a while ago. I still strongly believe that ghillies should be bolt action only. This would naturally limit the amount that are present in a game. I think the problem is that if a large percentage of players are wearing them it makes the games very slow and makes the games less exciting for everyone as it means more people are moving slower.
  22. So many people getting played/scammed when it comes to trades. I myself would never do a trade but if I was it would always be done in person. Always use Paypal goods and services!

    1. Chopper92

      Chopper92

      Agreed, seems to be the same name popping up over and over!

    2. Colin Allen

      Colin Allen

      Indeed.  I assume that those who have sent him stuff have his address.  🥊

  23. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    Hello, Looking for a shotgun to m4 adapter however please no 3d printed ones. Let me see what you have got. Thank you

    NO VALUE SPECIFIED

  24. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    Hello, Looking for a M870 Shotgun rail to put on a TM M870. Show me what you have got! Cheers

    NO VALUE SPECIFIED

  25. I don't see there being any real negative to having this. It protects staff and the players. So if a site feels like it's useful then so be it. I can see it being more useful for sites which cater for larger number of players for things such as recognition and for when things escalate on those larger sites where the next Marshall might be a 5 minute walk away. In my own experience players do seem to be getting more frustrated if not aggressive in the last few years. Especially after covid. Having more protection is never a bad thing.
×
×
  • Create New...