VonGrimm
-
Posts
155 -
Joined
-
Last visited
-
Feedback
100%
2 Followers
Recent Profile Visitors
3,942 profile views
VonGrimm's Achievements
-
Time Left: 4 days and 16 hours
- For sale
- Used
NOTE: Top rail not included. forgot to take that off for pictures 💀 Hey hi hello, bought this as a sniper backup but forgot how damn heavy it is for such a compact little gun. Overall good condition and fully working. Comes with the PDW folding stock, a 1913 picatinny stock adapter, a 3d printed 'prototype' foregrip/handguard and the original foregrip. Will come with a worling standard midcap mag (shown is a high cap mag which I will include as well but I think its busted) All works fine. My only complaint with it is that the semi auto fire rate is a bit sluggish, definitely not a spammy gun on semi but automatic is perfectly fine. Overall accuracy is better than I thought given the tiny inner barrel. Don't know the fire rate but it passed my local site's chrono on 0.28's and doesn't seem to be on the lower side.£125
Mexborough, South Yorkshire - GB
-
johnnyj reacted to an advert:
LCT AK G-04 NV
-
This advert is COMPLETED!
- For sale
- Used
Hoping I've got the model name right on this one 🤡 Bought this very recently but almost immediately became surplus to requirement when I acquired yet another Bizon. Was going to strip the metal with some steel wool and weather it up but figured I'd let someone more appreciative get a hold of it before I get back on my bullshit. In overall great condition with the exception of some scuffs and marks on the lower handguard. Internals all seem to be stock but it performs about as admirably as a £300-ish RRP gun ought to. The fire rate is fine, the range isn't anything to write home about but its not bad either. I've stock guns that performed much much worse than this hefty little unit. I don't know the FPS as I don't have a working chrono anymore but from using advanced technological methodology known as 'looking with my own two eyeballs' I wouldn't say its anything awful and it was lifting 0.28's 25m down to the end of the garden without any dipping. There's no drops in FPS leading to stray BB's falling short at all, and the overall accuracy is pretty good. I'd imagine your favourite flavour of hop up packing and nub is all you'd need to make this into a solid workhorse. Top wired to mini-tamiya Oh and the mags are horrible plastic high-caps. They function totally fine, they just cheapen the feel of what is otherwise a very solid and quite hefty gun. I'm just including them as these were what came with the gun and I don't have any other spare AK mags to hand sadly. If you buy this and like it enough to make it your skirmish weapon and haven't given this beautiful gun the new mags it deserves by your second match I will sneak into your home and take a leak in your kettle. Happy to post but new job keeps me out of the house until quite late in the evening. Worst case scenario; I'm free on Saturday mornings and can post it then. Feel free to ask any questions, request specific pictures, videos of it in action etc. etc. Postage is £10 due to weight. Open to reasonable offers£180
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Bought this a while back from nother user but didn't chance to use it too much myself. Its clearly seen some use as you can see from the Cyrillic markings done by the previous owner (I have no idea what they mean. I did a rough translation and one is a name, I don't recall what the others were but they weren't obscenities so I left them alone and just never got around to painting over them lol) I told myself I wouldn't sell this unless I managed to get lucky enough to get an AM-95. And then immediately managed to buy an AM-95. The visor has had repairs done where it cracked on the side which seems to be extremely common with Gearcraft ZSH-1-2M replicas. Padding inside is sufficient but the chin strap does need to be on nice and snug otherwise it will just constantly try to tip forward. I have a big fat 63cm bonce and this just about fits me so I would say best fit for 59cm and above. A bit of a rarity though lesser quality replicas from China are available. The visor is hella chonky and does absolutely stand up to BB impacts but due to the large gaps all around it I wouldn't risk it without actual eye pro underneath, and any site that gives a damn about being open for business will probably insist you do that as well. Postage is high due to the size and weight. Please note I am away from 24th - 28th so won't be able to post during that time frame. Offers and Collection in person are both welcome.£160
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
3x standard green gas magazines for airsoft EU / G series toy. None working unfortunately. All three are lacking inlet valves. One has a dodgy BB follower. Only one has a baseplate which had previously been modified to fit an HPA valve (not included) All include their springs, feed lips, rubber seal and outlet valve, though the outlet valves may or may not need replacement o-rings or lubricating since they've been sat in this state for over a year now.£18
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Lightly used but no longer needed. Fits the standard AAP-01 and AAP-01C lower, but can confirm it does not fit on the FUKU-2 with side panel grips installed.£8
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello Selling on this pair of steel 7.62 style 30rnd magazines for WE AK's. One fully intact, ths other is missing its magazine follower however. I was going to 3d print one then I sold my AK and since misplaced the model I made so I'm going to make it your problem (at a discount of course 😉) NOTE: both mags do have their base plates. I just forgot to put one on because I'm a pleb. Both of these were HPA tapped at one point so I've put the green gas input valves back in. They work fine but might want a double checking to make sure they're tight. Open to offers, combined postage costs if buying something else etc. etc. Feel free to ask any questions£35
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello for sale is a lightly used and lightly modified airtac hpa adapter for WE AK's. Advertised as for AK74 but can confirm it did work on my AK47 as well. This works fine, but I no longer have a gun to use it in so its no use to me now. It will require feedlips and a knocker valve to be donated from one of your WE gas magazines in order to work. Two things to point out - the first is that I lightly sanded part of the frame down because on my AK74UN there was a rivet just infront of the magwell that got in the way. You can just about see this in the one of the pictures and doesn't effect use or integrity in any way. Secondly - the BB retention nub is gone. This doesn't effect use once your mag is locked in, however it does mean that upon unloading your AEG magazine instead of 3 or 4 BB's dropping out from below the hop up, instead about 20 bb's will drop out so best running your mags to empty if you dont want to be wasting BB's every reload 😵 ALSO NOTE: it can be picky about specific AEG mags. It supposedly works best with CYMA mags but I haven't been able to confirm. I used some cheap all.metal 7.62 style mag (probably a nuprol or a battleaxe etc.) and it worked like a charm. It did however despise my G&G mags. Open to offers and such£40
Mexborough - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello Having a clear out of some old shite and have this WE GBBR AK mag taking up space. Its tso biggest faults are the crack around the shell just below the front locking ridge and a completely absent bb follower / feeder / whatever you wanna call it. In theory it just needs the follower to be functional but depends how comfortable you are using the cracked shell. could be better off as a donor mag for parts£17
- GB
-
Rollade reacted to an advert:
WE AK74UN GBBR w/ 9 mags & HPA adapter
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello Looking to sell on what was once my dream gun. Unfortunately I kept dreaming and now have my eyes set on something else. The gun is steel bodied I believe and in great working condition but cosmetically-speaking it would benefit from some polish or a paintjob. When I got this the previous owner(s) had done an extremely crusty job at painting it green for some reason (yes, the Zentico stock was painted green. I don't know why either.) and then an even crustier job painting it black ontop of that so I stripped all the paint off the body. I didn't get around to stripping the replica zentico PT-3 stock, and the paint thinner I had would have damaged the polymer handguard so I just bought a new set, though i will include the old handguard as well as the new. The holes crudely punched through the handguard were to mount rails. The top one can't hold a rail properly, however the bottom one holds a rail perfectly fine (albeit slightly angled forward due to the angle of the lower handguard by default) It comes with 9 WE branded magazines. 6x orange 40rd 5.45 style gas magazines 1x black 40rd 5.45 style gas magazines 2x steel 30rd 7.62 style gas magazines. 1 has had its feed lips removed and donated to the HPA adapter, and one is fully functional but has been HPA tapped. a standard WE gas inlet valve will convert it back to green gas. Internal upgrades are as follows: - Maple Leaf 229mm 6.02 GBB/AEG hybrid inner barrel - maple leaf 70degree bucking rubber (intended for HPA, but could benefit from dropping to a 50 or 60 bucking for green gas) - drop-in short stroke buffer kit Also included is an AirTac WE AK Magazine adapter to allow the use of AEG AK mags. One slight flaw with this is that the BB retention nub bit sprung out of the adapter and disappeared so when removing a magazine expect the adapter to piss out about 10-15bb's or so instead of the 3 or 4 you get with AEGs normally. I did sand part of the adapter down in order to make it fit flush around the rivet on the underside of the receiver. It also needs to be installed in halves, which is easy but does require an alen key to split the adapter in two parts, then reassemble. Tbh I'm slightly disappointed in the airtac adapters tolerances. It fits and it works, but its not perfect since it requires a tool to install/remove each time. Overall its a fun gun especially in close quarters but if running green gas the accuracy isn't amazing at long ranges. Running HPA does make up for that a bit though, and could be a result of me using a bucking that was too hard for poor green gas. This is going to be a big ol' parcel to post so I might end up splitting the lot into two parcels, I'm not sure yet. Collection welcome and very much preferred. May also consider parting ways with the magazines or an adapter separately from the gun for the right prices. I may consider trades but I'd be looking for something substantial of similar value, and the trade would have to be done in person. I'm NOT going to consider £500 worth of budget M4's, a springer sniper and some Raven 1911s or something. Open to negotiations on price, but please bear in mind the postage costs, and how much I could get for flogging the magazines alone on eBay.£520
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello I bought this second hand as a sort of back-up gun/loaner for a friend because I'm alergic to M4's but I forgot how much I hate AUG's two stage trigger so I'm looking to offload it already. Comes with one mid cap and one high cap mag. I'm not sure how old it is but its in great condition and has been well looked after. The previous owner has upgraded it with a longer tightbore inner barrel, hence the inclusion of a suppressor to cover it. He also upgraded the hop bucking from stock. I don't know what to but from taking a peak through the hop up chamber it looks pastel green which to me smells like a maple leaf. This being an older Tokyo Marui the power is lower, sitting at about 280fps on 0.20, assisted a bit by the upgraded barrel. Rate of fire is high but nothing crazy. I just can't get on with the two stage trigger. The first half of the pull is semi which when locked to semi feels fine. the latter half of the pull will make the gun fire full auto, complete with a hearty kerchunk as the trigger moves past that biting point. Totally functional and works as intended, but feels like shit. If you're a freak who likes stock Mk.23 striggers then the AUG trigger won't bother you. If you're spoiled by snappy hair trigger response like me then you'll probably hate it. The other thing to point are the charging handle springs for the hop cover are a bit squeaky as you'd expect on an older gun. This squeakyness is exaggerated by the AUG's chunky plastic body like an echo chamber. Its not obnoxiously loud, but you'll definitely notice it. The final thing to mention is there's no rear sight. I don't know what happened to it but its not there. NOTE: I forgot i changed front sight in the pics of it outdoors on the grass. the front sight you'll receive is the one shown in the pic of it laying on the gunbag 😅 Happy to provide videos£155
Mexborough, South Yorkshire - GB
-
spearedd reacted to an advert:
FMA FAST PJ Helmet (Large, Ranger Green) + Covers & extras
-
spearedd reacted to an advert:
Spitfire Tracer Unit
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Having a clear out of things I'm probably not going to use any time soon. Numbers and names correspond to the main picture and second listing pic: 1. HK416 style stock nice and heavy with rubber buttpad + AK solid stock buffer tube (also quite heavy). Its on tight with friction. Will take some elbow grease and a firm grip to remove which I lack with my busted thumb. (£20) 2. Ammomax Desert Eagle belt holster (£4) 3. Heavy M4 stock buffer tube (£3) 4. [[SOLD]] Nuprol 110rnd Steel M4/M16 Mid-Cap Mag (£4) 5. [RESERVED] Knurled 14mm CCW mock Suppressor (£6) [RESERVED] 6. Plastic 90 degree angled picatinny foregrip (£4) 7. Unknown/Generic V3 AK Motor & Cage (£4) 8. FAB Defence MG-20 (M4 Mag grip/holder) (£25) 9. [[SOLD]] Metal AK 7.62 style midcap (probs CYMA or Nuprol) (£4) 10. CYMA AK 47 Railed Dust Cover (painted & worn) (£7) 11. [[SOLD]] Unknown M4 handguard of some kind (Just pay postage. Free if ordering with another item.) 12. Unused Helikon Belt Molle Panel (£6 each or both for £10. Both unused, one still packaged) 13. [[SOLD]] 13. Custom AAP-01 All-in-one upper receiver / barrel with 14mm CCW thread (don't know much about it. never used it) (£8) 14. [[SOLD]] 'Tactical' Belt. Probs upto 42" waist. (£4) Postage for Helikon Molle Panels is £2, Postage for everything else is £3 - happy to combine postage costs or accept offers if buying multiple items.£25
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Found these sitting in the bottom of my box of misc. spares having forgotten about them. Think they're ones I got back in early 2023 for a WE G17 I had bought for my buddy and I recall them working fine in that. Unfortunately I have no idea what brand they are. They are still gas tight, one has been stored with BB's in to break the spring in a bit but the other was not loaded so the spring might be a bit stiff still idk. I would say like-new condition overall but they have been stored loose in a draw with other metal and plastic things so there are some mild scuff marks. Postage is £4, Collection is welcome too.£26
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello Selling on this Spitfire tracer unit. Used a couple of times but I have more tracers than I have a need for now so selling this one on. Fair condition, minus some sticker residue that I shall clean off. The Stay Spooky is a sticker of course. You can remove that one yourself. Illuminates fine, holds its charge fine, auto-wake works fine. Does not include an 11mm adapter or anything, so in its current state its solely for the usual 14mm CCW threads Offers welcome, Collection welcome£25
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello Selling on this FMA Fast Helmet that I no longer have a need for. Only used it once since I bought it earlier this year. Sized large and comfortably fits my massive 64cm bonce and includes the quick adjustment twisty dial doohickey on the back to loosen and tighten the fit on the fly. Comes with: 2 FMA rubber side protectors (the screws and mounts for them are included and are installed on the side rails if you look at the pictures, but for convenience I will take them off the helmet and attach them to the side protectors when posting.) A cheap flimsy plastic flip down visor. Bought for shits and giggles but was more of the prior than the latter. The visor tilt is nice and snappy, but the actual fit in the rails is a bit loose. I've also cut a bit of the top of the visor off to make it fit better over the NVG/Cam mount on the helmet, but its not perfect. Will need some tweaking to not just pop off if knocked or caught on gear. 3 covers - 1 used black multicam Emersongear cover that fits nicely, and 1 US MARPAT and 1 RU EMR / Digi Flora cover I got for cheap of Aliexpress. The aliexpress pair are a tighter fit as you can see from the EMR one that's installed in the pictures, but I've added some extra velcro inside the helmet to ensure a more snug fit across all three covers. Overall good condition. Offers welcome Collection welcome Otherwise I'll post for £5£30
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Overall great condition given its age. I believe Cactus Hobbies is now defunct or doesn't operate in the same capacity which is a shame. Seems to have had very little use in the field but has the usual age related cosmetic marks as you'd expect with a bit of dust build up in the crevices, mild stretching to the straps etc.. It has some heft and density to it with plenty of internal padding and is very comfortable to wear, unlike the modern mass produced ten bob Chinese stuff all over eBay. Never worn it to a match myself, I just already have 2 Cactus Hobbies masks laying around and decided to try make a collection of them before I realised I have no room and 30+ other masks already and so it must be sold.£30
Mexborough, South Yorkshire - GB
