itsme

Got me a few replacement parts for when I need them. Might need a replacement MWS aswel

I play with a dye paintball mask and makes it a lot easier to shoulder the weapon for me. I don’t like the looks of it either but it does the job really well. I would like the UNITY Fast Miceo  which is kind of the same height as this one but it’s super expensive over here. So for now it will do. 
 
 

 

Removed my silent fill o-rings from my greengas modded mags after having some trouble filling them up enough to shoot a whole magazine. 
 
problems are fixed and I can get about 2,5 mags worth of bb’s through a gas fill. 

Bonus picture of my CQB MWS build. 
looking to get a new buttstock. I want an SB tactical SBA3 but can’t seem to find a European resaler. If anyone knows one or a similar buttstock please let me know.  
 

so I eventually joined the MWS club and to make it have a variable FPS because of the crazy UK weather I fitted an NPAS

I was worried that the little adjustment tool would disappear into my bag never to be found again so I found a good solution.

Basically I dremeled a channel into the stock plate the same shape as the little tool. Now it won't get lost and always be handy.

So this is a thing, so question is guys what's the route I should take, g&p A2 buffer or the angry gun high speed? 
 
Cheers Chaps.

Personally I like a painted gun, but I wouldn't go painting a cerokoted mws though. Leave that for the cheaper poorly finished guns. I use
https://www.freedomstencils.com/
They're not cheap but give a nice finish in my opinion. Here's some examples I've done with krylon matt finish sprays. Taken to bare metal, primed, sprayed and clear coated at the end. That's my 2 cents.

Yesterday my rail came in so my friend at Repairsoft helped me out with the install. 
 
I went with the Madbull noveske NSR 7" freefloat rail. We went to try the PTS ring and the rail but it left too much space between the reciever and the rail. the ring was needed though but it didn't fit the barrel nut, it got stuck in there actually. Jeff milled the smallest ring so it would fit all the way into the barrel nut. This also fixed the space between the reciever and the handrail.
 

 
 
With the handrail in place it was time to get the barrels to length. 
I didn't get a new barrel and wanted to cut the original down. After putting it in the milling machine we saw that the outer barrel was conical which was a bit of a problem but we managed to get the job done pretty quickly. 
 
Then we cut off the inner barrel so it stuck out a little further than the outer barrel so it would be just in front of the LED in my tracer. 
 

 
After that the outer barrel needed just a little bit of paint and the job was done. 
 
Loving this CQB build, looking forward playing with it in the near future.
Only thing i'm looking for now is a real steel skeletonized pistol grip. 
Also i would like my vortex +- 1 inch higher without making it too bulky, minimalism is key imo. if anyone has an idea for that please let me know!

Hope you guys enjoy the build aswel.
 

 
 
 

Step one: buy a SixG brass super nub (best upgrade in my eyes)
 
step two: buy a modify tan bucking
 
step three: buy some geoffs .36 bb’s
 
step four: fit the parts and test
 
step five: return here to tell me I was right lol

yea will do. But it won't be till next month now... I blame all of you for tempting me to get the vortex sight hahaha. I got the asg short dot AND the vortex crossfire at the end. The vortex should be arriving tomorrow. 
So many things I wanna buy so little money. SAD TIMES!

mine's not arrived yet but ive ordered the vortex too. Worth it all day long in my opinion. never loose zero because it's real steel and the warranty is fantastic. Why sped £50 on an airsoft replica that'll either break or get shot out. I can shoot out a vortex and they'll just give me a new one, no questions asked.

When it comes to red dots.. something to bare in mind. If you have an astigmatism in your eye(s), you will never see a clean dot. One of my friends didn't realise that he had one and just assumed all red dots were a little blurry. 100% recommend the Vortex Optics though - they are worth every penny. 
 

Oh way cool then, one day! (I will get my license)
 
Yoi certainly don't need the Super Nub for range purposes but you will still benefit from the tighter grouping it gives, especially left/right flight deviation.

Oh awesome mate your going to love it. My local club (FPS) is hosting the European championship in a months time. I won't be shooting tho just recording footage.

I'm the same mate light and simple is the way to go, I plan on doing alot of practical rifle drills , 2 gun, ipsc but who doesn't like a shootout! 😂 The strikefire is quite large but it was the look that got me but I think I'll order a crossfire tonight as it's payday! 😁

How would I go about modding the MWS to look like a Vietnam era M16A1?  

I have mag envy 

Yeh I count out my rounds, that way you know where you are and sometimes you change mag prior to an assault or likewise.
 
@sonofsammo make sure to lube all seals and gaskets when assembling so that everything can seat in.
 
Got me another MWS mmmmmmm
 
To anyone on the fence, get one! You only live once hah!
 

Hhmmm i see some pople having issues with their MWS, i will count my lucky stars then.
 
Took my TM MWS out on Sunday and my oh my di it impress.
 
Yeah Using Green Gas she was shooting 330FPS using .020g BBs and around 295FPS on .28g BBs.
 
Stock Hop chamber, hop arm, hop rubber and bucking the MWS was sending BBs so far i was losing sight of them.

My Vortex optics was so on point that where ever i pointed it at was guaranteed a hit!
 
Gas in mags were good enough for full auto dump (not that i do this, i use mostly semi).
 
Lock back worked everytime, i must say iw as mucho impressed and plan to take her out again.

I've cut mine down and it holds more gas for sure, don't see any change in the consistensy of shots.
 
I stuck the same skewer i used to replace the mag spring into the tube to see where the filling valve was and used a marker to see how long i could cut it. I left +- 1 inch extra so the zinc tube is a bit larger than the filling valve as this is the reason why some people get inconsistent shots (i've heard.) 
 
Can only recommend the mod. 

Stay tuned!

Is your adapter alu or plastic? 
Mine fill realy bad with an alu adapter, plastic is better but i have the same problem as you never sure when its actually full. I'm gonna place some silent fill o rings monday so maybe this will fix things. I you have gas spitting out your mags aren't silent will ones as you wont see gas spitting out of them. You can clearly hear the gas go into the mag and you won't hear a thing when they are full. (atleast thats how it is with my hi capa mags)

Hello everybody, I upgraded my rif with parts recomended the most here, i.e. Modify TAN bucking + SuperG brass nub. I also added tightbore barrel MapleLeaf 410mm 6.01mm.
 

 
I never found any exact measurements of the difference in fps and projectile energy while using short and widebore barrel vs. long tightbore barrel. Therefore I decided to have a nice evening with chrono and several weights of bbs and measure it myself.
 
I used chrono AIR CHRONY MK1 (https://www.anareus.cz/detail.php?id=12868). The web is in Czech language but it basicaly says that this is high end and precise chrono. Measurement were all taken indoor with air temperature around 22 celcius. Humidity was around 45-50%, therefore indoor average. I measured velocity in m/s and then converted it to fps with conversion of 1m/s = 3.28084 FPS.
 
I used several weights of BBs. These are: BLS precision 0.20g; G&G white 0.28g; Madbull 0.40g; Novritsch 0.49; BLS Precision 0.50g.
 
First I used vanilla/stock rifle and took five shots of each BB. Then I did the upgrade, i.e. change bucking, nub and barrel, and again I took five shots each. You can find result in table hereunder. In green cells there are mws stock shots and in red cells there are shots after the upgrade. 

 MWS table.xlsx
Edit: Please ignore measurement of the fisrt shot with BB Novritsch 0.49 taken with stock MWS. It is a typo and I dont remember the correct measurement. 
 
What I find interesting is this:
 
1. I feel like I dont have enought fps in stock/vanilla rifle. If I remember correctly some people said their stock rifle has around 330fps. Can anyone confirm this?
2. Increase is not what I expected. I though it would be 20% and more because it is tightbore barrel which is 170mm longer than the stock one. Has anyone different experience?
 
3. Increase in fps and especially in energy is more significant with heavy weight BBs.
 
4. Consistency is very good. However I havent seen prolonged measurement in any other rifle and I took only 5 shots.
 
Please feel free to comment. I am very interested in your findings and opinions.
 
Thanks!

Well, go ahead and grab some coffee and hit play on that Spotify Playlist
 
Hello guys, Cheers from Panama City, Panama. (Central America just in case)
 
i bought my MTR16 a couple of months ago and was waiting to be a least on half of the build i am planing to share with you guys the excitement, the process and the findings with the journey
 

 
So, i have played once on a game and also several practices with my team as you can notice some scratches. 
I have to say that is one of the very best GBBRs that i have tested, i have shot with KWA LM4s, GHKs M4 and G5 and this is one of the most quality out of the box that i can feel.
Of course upgrades are necessary to give that personality and punch that the gun deserves to have
 
I play Milsim / Hardcore Milsim like 90% and even tho my main roll on my team is to be a sniper ( got a JG BAR10 tune up with Action Army Parts hitting 400 fps with 0.43 @3.07 Joules if you are interested)
i really wanted to go for the GBBR experience by being DMR/ Assault when i have the change or not allowed to play sniper at some areas or specific games. also being one of the instructors for some drills on the Practices with my team is great to have the your very own mainstream gun :v
 
Vanilla version of the gun was like this
 

 
 
 
My Limits for DMR are   2.23J máx. – 490 FPS
and for Assault are 1.60J máx. - 415 FPS
 
did some research since i was point blank on how GBBRs worked, had a clue but definitely not a Pro. decided to go for the ORGA LEX05 6.05 410mm for the inner barrel with the Modify TAN hop up and SixG nub ( classic copy paste from the 1st pages of the thread)
 

 
Dont you love that outer barrel? i really enjoy this design
 
Since the MTR comes with a 250mm even tho it came on a 16" barrel ( a shame on my opinion) i decided to go full on outer barrel length.  this barrel was a PAIN to get. since there is not much sites that sell them ( as far as i know) tried but finally got it from French (i believe) with POWAIR6.
 

 
here you can appreciate the good work of Dave. fitting perfectly  and in symphony with the Modify TAN that has a singular density... perhaps i will try the Maple Leaf Autobot and Decepticon here since i use them on my Sniper having good results just  to see or confirm the findings of Wolf1 on the first pages of the thread regarding the hop up buckings.
 
something i have to mention is that TM put Thread Lock on everything on the barrel, from the muzzle break to the NUTS! wink wink.... it was a PAIN in the ass to unscrew all the nuts from the M-Lok barrel, took hammer, a nail, and 4 arms to hold it and being able to take it apart... i though i would damage the inlays for the tool with it.. and to put it back was a pain too. while hammering the middle section, hit o the threads for the outer nut and was almost impossible to put back in.
 
So after installing these, i literally got NO changes on the chrono neither FPS or JOULES change with these. i was expecting at least some 20-40 fps up due to the length of the barrel. but it looks like what i gain on length, i loose it on the bore of the barrel. since is a 6.05. i originally was looking for a 6.01 but was not able to find anyone anywhere. well there was some 6.01 but most are 250 or 370 something around that, but for me that was a Nope.
 
but yes, i had an ace under my sleeve...actually two

 
to Power up i decided to go with some options on  so called "high flow valves"
on your Left (red one just in case) you will find the G&P CNC Enhanced Nozzle Valve Set 5.0 and pay attention to the numbers since they change with the number. the higher the number the higher the power. but it still adaptable with this part
on your Right you will see the Dynamic Precision Enhanced Nozze Valve.
 
Now.
with the Dynamic Precision i felt a little bit happy since i see some hope to power up this thing

 
so with the Dynamic Precision Valve i went almost 100 fps up with .50 joules up.  and by the way this is with NO other Nozzle Enhanced part but the Dynamic Precision Enhanced Sealing Buffer which i find better quality than tm's original, also a bit tougher

 
 
for a DMR that previous reading was still weak for what i was looking for, but dont worry , remember i got 2 aces and this time went full hardcore with no measurements or holding on the go
 
I went with the G&P Nozzle and i have to tell you that i really was expecting, not  poor quality but at least mediocre from this coming from the G&P since is a mid level quality company and it actually leave me with my jaw drop to the ground. you will see why
 
but did not tried just the Nozzle, but went also with some upgrades for the Nozzle parts from Dynamic Precision...
 
A full set of Enhanced Nozzle Spring Sets

 
there is the Valve Spring, the Guide Spring, the Nozzle Return Spring
they feel really good quality and the return spring is some tighter from the original and that helps on the performance
 
installed the G&P Valve and used the Valve Stopper ( i will call this part like that since i forgot the real name) all the way from what i thought could be the max power set up... these valves comes with this so you can tune up on 3 different settings. Min- Mid- And Max power. 
 
and i got... this monstrosity
 

 
520 Fps with 0.20 at 2.52 Joules, and this is not the 1st reading,  i forgot to take a picture of the first shots. it was at 2.8 joules almost at 545 fps
 
this might be nothing compared other builds here that i know could be shooting higher and harder but for me was joy, i was astonish with the results
 
Sadly it was TOO HOT, i actually over pass my team and also marshals limits
 
then i decided to put it on the minimum settings, and i went down all the back like back with the TM stock valve.
forgot to take a picture of this, since i started to worry, it was getting late on the day and i was worry that the last resort. the MID section will not be either enough or will still by over passing the limits......
 
so dismount and put everything back with the MID section... and at this point i was so frustrated that i laterally was making plans to sell the gun with everything if it does not worked out ... almost like a rage quit when you loose those ranked matches at league of legends due to some troller's fault
 
so back to topic... my limits are 2.23 Joules - 490 FPS and then finally i was.... drums roll!!!

 
JUST ON FUC^%&(* point!!!!
 
i almost cried when i saw these!! nothing was in vain!! all those over time hours of receiving calls from Kumar Patel with a problem on his Outlook were worth it!!!!
 
Finally hit this mark and im really satisfied with these results. the readings were very consistent.
 
i have not decided with what weight i will play... thinking about some .36s or .40s depending on the results .
 
 
Additionally have some extra parts.
 
i went with the Angry Gun Hard Kick Recoil Buffer. and i got to tell you that yes there is a lot of difference on this. even tho its angry gun, it fits just fine!
 

 
and by the way that whitey creamy thing is PTFE Grease.... and yes you might be thinking i am a dumb already, but i have still not find out if the is good or not for it. i cleaned it out already... putted also some on the bolt carrier but i dont think is good there so cleaned out too....
can you tell me what you use to clean and lubricate yours?
 
so wrapping up i am very happy with this DMR/Assault build.... half way trough it. now moving o the externals
 
if you guys have any questions or would like me to post the part list that i used including the externals you see on the picture so far just let me know or reply to the post with your inquiry!

I also want to say thanks to all of those who have shared their finding, experiences and knowledge on this thread, they have been of great help,  hoping to make it bigger and better!! to all of you keep up with the good work !!
 
 
 

Its more for aesthetics but comes into its own during indoor cqb. Plus the ridiculous amount of front end weight is helping with my own exercise!

Hi guys, long time lurker, first time poster. Here’s my baby. Have some tan alternative fittings (peq, stock, grip etc) for different loadouts.