Stevobeavo

Try contacting Taiwan gun and see if they can help. They seem to work very closely with DE.

It's just a M4 with a bigger more awkward magazine.

First time I used the mp5 mag at the weekend. All fed perfectly with zero issues.

I use a mix of ares, specna arms and nulpro pmags mid caps and they all fit and feed fine

Are we talking stock bucking and nub? If so my stock DE UTR 45 that is the same as the 90* range internally couldn't lift .3 I've swapped all my DE guns to a zci hop unit with maple leaf bucking of some sort and nub and can now lift .3 plus easily

Been having it for the last couple of days. Only website that does it for me so not my phone. Anyone else having this issue

Taiwangun. But ordered through patrolbase. Hopefully patrolbase get hold of some for there stock too

Mag adapters and mp5 mags for my DE UTR45 turned up today. Also a Daniel defense handguard I got off here turned up. Seems to be a insert in the barrel nut to make it narrower so doesn't fit over my outer barrel., So I'll take it it into work and see if it presses out

Finally got my mag adapters to run the more manageable mp5 mags. mag wobble is no more than the standard magazines. I'll test them out this weekend for any feeding issues

Put a order request Into patrolbase to order stuff from their site. Takes 4-6 weeks as I think they do a monthly request order to them. I've just had a few bits turn up today from doing this.

I emailed them about Airsoft barrel nuts and they replied saying they currently on do real steel threaded barrel nuts.

I had teeth snap off my spur gear on my specna edge. I've ended up getting a new zci shell from ak2m4 with all new Gears and internals

I've just fitted this kit into my specna arms E07. https://www.ak2m4.co.uk/internal-parts/gearbox-kits/m4-compression-upgrade-kit Excellent consistently.

Another option is using a tool box, hardboard foam and a few cans of plasti dip

Could be that as the old bucking was covered in silicon oil there was less resistance as the BB passed through it.

I'm another double eagle fan. I have the 904G, H and the UTR 45. For the money I think they are brilliant. Not had a single problem in any of them. Swap out the barrel and bucking and your laughing.

Thanks for your help. I think I'm going to go with a specna arms 13.5" hand guard or the a nulpro one if I can find one in stock in the size I want.

It had the e07 hand guard on it. I ideally want mlok like my other guns but Ive read about different thread sizes etc.

Hi all, I'm looking to change my hand guard on my specna arms edge E07 for a longer one. Does anyone know which would would be a straight swap. This is the type of barrel nut fitted

I have one of the XT 22 in a DMR build I'm doing at the moment. Had it for over a year but only just started using it. I'm surprised by how snappy it is compared to the specna edge 'upgraded' motor.

Finally got round to testing the gun out. The guns now shooting 1.09J so a slight increase over what it was new and I've gained 0.14J from my last game day, so I'm happy with that.

That's interesting, everywhere you read says to replace with one with a o-ring. I'm only just getting into teching, that's why I got one of your ZCI gearboxes last month to play with in my dead specna arms. Once I test I'll put the readings up for you. I definitely need to get a few decent springs for my DE guns, just never got round to it yet. How did you turn yours into a DMR, cover the full auto optical sensor or stop the selector plate moving that far?

had a morning session last sunday and noticed at chrono my 904G was down to 0.95J from a constant 1.07J in all previous games (on stock spring still) and also after about 2 years of owning my 904G I thought it's best that I actually do some maintenance on the gun. Stripped the gun down Although there was barely any grease left in the gearbox there wasn't much wear on the gears Checking the air seal, without the nozzle on it as pretty good but with the nozzle on it was actually pretty poor, nozzle has no o ring. So I've found my old specna arms cylinder head and nozzle with o-ring swapped them over and now I have a really good seal. Had to drill out the cylinder head holes by 0.5mm for it to fit on the lugs in the box. All lubed up with Waldo custom grease and reassembled. Ill be chronoing it in a few days to see what's it's shooting. But im certain it will be more due to the new nozzle sealing properly.

I've put ZCI Barrels, ZCI hop up units and maple leaf bucking in all my DE guns. They shot great now. As for the motor can't say I feel like it's lacking. ROF I think is pretty good on a 11.1v . I personally don't see the need to fire 25+ BBS a second.

My mag leaked out the box but I took it apart and greased the o-rings up and its been ok, but doesn't hold as much has as the WE ones. Also try adding a little lube on all the moving parts. Mine came with barely a drop on the gun.