paradoxum

Is that re: me? I guess it's more of a "what I just bought and has arrived" then than what I literally just paid for? I thought the former was for the gear and pic thread.

3x EPM1-Short mags! Does anyone know what follower the EPM1's have stock? For example is it worth getting https://www.fire-support.co.uk/product/pts-epm--epm1-orange-follower-3pcs--pack these or are they the same as the stock ones?

/Almost/ finished my custom ICS BCM Hera Arms CQR: I'm getting fancy takedown pins, forward assist, dust cover, trigger guard, getting the mags cerakoted the same colour but leaving the baseplates black, should look good. I've got a black NGAL and one of the new MAWLs on the way, don't know which I'll end up using. Any suggestions for a sling for this? I am thinking maybe a single-point attached to the stock, P90 style? Also finally my PTS ACR stock got off the boat after 3 long months, I loosely slapped the gun together for a pic: Just waiting on a Warhead motor for this and I can put it together. I am getting a black Wilcox mount to swap that with, and might swap to a MAWL on this too depending on how I like the look.

I just realized it's because i'm standing in front of my huge fish tank which has two big bright CFL tubes, they were probably lighting up part of me and not the rest. They're bright white, while my ceiling bulb is warm yellow. Notice the couch near the front of the picture compared to the back of the room.

I think it's because my curtains are a dark maroon colour, it tints everything in the room slightly. Probably that or just the lighting - both parts are the same green, the only brown is the stretchy fabric between the joins.

Nah they're not tight at all, very comfy, could even be tighter so they'r less baggy. Probably just because I have thicc thighs maybe?

The new IDOGEAR G3 repro set is really good:

Finally snagged a Tactical Airsoft Fast Frag 60: https://ampedairsoft.com/tactical-airsoft-combat-simulations-fast-frag-60-single/ They're hand-made in small batches so had to wait like 6 months, and snagged the last OD one. It's for holding my Tornado2. Got my Milspectailor belt too: Great quality highly recommend. https://www.milspectailor.com/product-page/gen1-shooter-belt And 3x InvaderGear 40mm pouches for my master mikes:

I like bullpups in general but something about the design of that looks off to me. maybe because it's mostly polymer plastic?

I just ordered the same one for my Hera CQR

https://www.deltamikefacepro.co.uk/product-page/dark-woodland-face-protection-snood 1 x lambda Five Inner Barrel (AEG) Length 208mm 1 x Prometheus Air Seal Chamber Packing 1 x Firefly Namazu Flat Hop Nub for AEGs with Stainless Steel Pin Hardness Hard Prometheus Hard Selector Plate NEO For the Hera Arms CQR.

New gun: BCM Hera Arms CQR I think I'm gonna get it cerakoted the same colour (the red looks darker and better IRL than in the pics). What optics should I get for it? I don't like the stock plastic ironsights, what ones should I get to replace em' with? How's these for optics? https://www.egtactical.com/scope/326-674-a-aevolutiongear-acog-w-3d-letter-markings-2020ver-perfect-replica-in-stock.html#/33-color-black/63-dot_color-red_dot https://discord.com/channels/564112231927906324/564291020171378709/867012976400400385

I made my surefire hl1 clone a bit less chunky and more low profile against the rail on the helmet, previously: Now: Looks a lot better imho. Thinking of buying a real surefire, they're only like £90.

got mine from https://www.weapon762.com/ there's a new "2021" version out that apparently has improved audio you can find here: https://www.egtactical.com/headphone/408-720-fcs-rac-headsets.html#/39-color-dark_earth

nice guns! The headsets are great, even if not using voice comms the amplified 3D audio sound is great, and when not in use they just swing back, easily adjustable for a comfortable fit on your ears too.

Did some final changes to my helmet, I mixed and matched two caiman mandibles (a tan and black), the black one with shorter struts so it sits closer to the face and I can actually aim down my eotech. I'm not sure if I should use the Tan main part of the mandible instead of the black, I'll post a comparison pic soon. It's because I don't really like the colour of the tan on it, looks very plastic-y. There's a Foliage Green model of it that I might get and try that with (rest of my kit is all ranger green / multicam). TMC Flowing Helmet Light Ver. (MC) IDOGEAR Helmet Cover for FAST Helmet (Multicam) EmersonGear Helmet MK1 Battery Case for USB battery for gopro. SEIGNEER Helmet Strobe Signal Light (Red) Element EX-029 Helmet LED Light Set Gen.2 3M Nitrous Safety Glasses ANSI Z87.1 Certified (Clear) TMC RAC Adjustable Swing Headset (Tan) (Might try and get a black pair and mix and match the mounting parts) PTT Switch - Earmor PTT Unit - Kenwood version [M51-KEN] Baofeng UV-5R Dual Band UHF VHF Walkie Talkie Ham FM Two Way Radio Waiting on a brainexploder mount for camera.

Took the flipup sights off. I think it looks better. Going to replace the grip with Should look a lot better.

Thanks, I made a few changes to it, and the side-light (forgot what they're called) is mostly just for aesthetics, I'll almost never use it.

https://www.aliexpress.com/item/4000734485224.html

Well I hardly get to use comms so I end up swinging them back which is why I went for them really, they're comfortable and have two different settings of 'tightness' on your ears for a snug fit, with the 'length' on the arm also adjustable, I'm always worried about them snapping out of the arc rails when I adjust the tightness bit though, even though it has only happened a couple times, that'd be my only complaint. Edit: Changed some things, just aesthetics really: kit now: want a slimmer belt, probably drop the double stack mags on the belt Helm finished need to get a brainexploder camera mount; https://www.brainexplodermerch.com/product-page/adjustable-nvg-mount-gopro-style and there's nothing else I'd change now.

Finished setting up my helm today; TMC helm, mandible, headset, cover, xiaomi yi action camera, lipo usb battery in back pouch for camera power. 3M clear safety glasses. Wove some cord through the arc rails, might swap the nvg shroud for a tan one, or how does black look? I wanted black rails with tan cord, too, but couldn't find any spare parts for it (TMC helmet, but I bought some black TMC rails from aliexpress and they aren't the same shape). My kit (clothing) is multicam, gear like belt/rig/pouches all ranger green, primary a SCARH with heavy tan/black aesthetic.

It's from Parker Mountain Machine, along with the rail elimenation panels, PRE, and lightweight vented lower rail. Are you right handed? Because I think I actually have a spare front mount in black that they sent me (they don't ship internationally and I had to get a buddy in the US to proxy them to me.)

Finished my SCAR-H finally now after 2 years. Only thing I'm missing is a black EGLM. https://imgur.com/a/vGdXzIF So shiny.

I think I'm finally done with my VFC SCAR-H. Parts: https://docs.google.com/spreadsheets/d/12v6YkUH44YzoyB8OpJLW5I2xgpuF0jbp0GJial5D-7Y/edit?usp=sharing I'm probably going to remove the flashlight, is there a smaller/lower profile one I could use? it's too chunky.