heroshark

Hi-flow valves modded from stock and a longer inner barrel. 400 one is an old 6.03 I cut to about 250mm. The 350 one is the CJ one that sticks out a little on a standard gun, think it's 150mm.

Forgot to say surgu may be a good option. I often cut mine out other hops though.

Well set then ☺️.

Try a standard AEG barrel. The groove should actually help locate the retaining screw and barrel orientation. Could even add a divet for the screw to sit. Cutting the barrel flat and making a hop window are the hardest part if it's ready done you are a good way there.

Why go with a longer barrel and cut?What's to stop you fitting a barrel the correct length and using the window that's already there?

Not pulling it apart in case it doesn't go back right, sorry.

Still adjustable. I can't remember if I did it in my CT but I've used a piece of tin can to back it before now on other guns I've Modded hops in. So it's not just the screw against the rubber.

Ah yes it's the same. Terrible design gives such inconsistent spin it's unbelievable. I understand it in the ct25 with the space. Suppose it's kinda tight. Took a small hand file to the barrel. Widening and lengthening into a larger square window. Then made a hop patch to fit the window. It halved the grouping size.

sounds like the ct25 hop. I ripped mine out cut a proper window and made a flat hop in the ct25.

Shot from Sunday.

In woodland/outdoor site I find myself more and more just running the mk23 and gbbp. I have 2 uppers for my mk 350 and 400. Some sites don't allow my DMP but even with the 350 upper I can make the same hits.

The suppressor does not effect power alone . Only with the clone guns with the suppressor having an inner barrel. I use mine as a long range gun the hammer is da/sa so you can negate the long pull and take a steadier shot. But in a less sneaky close up target rich environment I prefer a good gbb.

Two different animals. Both good in their own right. You should get both.

I have a great fondness for old spring guns myself. Has been posted before and I need to get a new pic as I've got about 20 more since this picture. One day I will have a gun wall.

@PydracorVery jealous, one day I hope to have a space to display my spring gun collection. Nice maverick btw.

I don't think they sting as much.

I remember batting someone in the forehead with my little marushin cop years ago and he went of complaining to the Marshall. Was only about 250ish on 0.2g . I tend to just use my 8mm they're only little anyway.

Couple of pics from the gangster city event at sparta.

I stick inner tube rubber in my hard pouches.

I prefer something that's easier to get the mags in quickly so I don't need a dump pouch. I still keep some in more secure conventional velcro pouches and just cycle them through

tbf I remember they had had to stop using bangs at tac house Chesterfield for a while and it was good fun.

Ooh my sister lives in Newbury definitely be down for that. Maybe drag my brother in law along, that would be funny.

Sad I couldn't go.

Decided to keep this in the end, cybergun licenced king arms python . Spent hours re-boring the cylinder to take the multi-shot shells from the kwc python and upping the gas output to find it doesn't perform as well as the kwc. Ah well its prettier with the trades and more accurate frame shape. Grip angle/shape is way uncomfortable compared to the grips of all colt python replicas I have had though.