Slaverius

Hey guys, I've been eyeing an KJW CZ-75 SP01 to replace my nearly dead, old school CZ, as the ergonomics really click with me. Not to mention out of the box for, their price these are quite decent side arms. I've been rocking mine for 2 years now prolly 12k rounds though it 2k of witch were with the nozzle housing shattered in half. But all good things must come to an end I suppose. So on to the question what are the differences between the standard KJW Pistols and the APlus Custom ones? Can't seem to find any info on that. Is it better internals, because looking at pictures externally they seem identical. Except the APlus Custom Sticker slaped on the box and it is not even straight... Cheers in advance.

Yeah it does. Well if I can't find any info I'll just have to buy one and risk find out.

Hey guys, Can any of you shed some light on what cylinder head is in the CM.099 VSS Vintorez by Cyma. Or what would work on the GB I want to build a DMR and don't think the stock one will last long. There is one disassembly video on the tubes but the dude does not notice the difference. From what I have seen on the webs it's an S&T variant but still no idea what that head is. Or have you worked on one?

It's ok. I am out side the UK. It's crazy I live and play in Bulgaria. The limit here is 100mps and 1.3j with 0.30s for AR's minimum distance 5 meters and no indoor shooting. That's where the KP-09 and KP-13 shine. Yep Warfet already installed. But none the less the battery needs to go. After the 3rd shot in quick succession there is a noticeable slow down in the cycle. I've ordered and have the rest of the parts lying around I'll give it a try. If not all chuck all of it in my MK18 and have it be more CQB oriented.

Hey guys, I've been stage building my CYMA CM.040D AK and so far so good. I''m quite happy with the power, range and consistency with the compression upgrade I did. I'm getting 395 FPS and 1 joules with 0.20 g. and 311 FPS 1.3 joules 0.30 g. BB's with fluctuations of an average of 3 FPS up and down.. Now I want to get a sort of balance between snappy trigger response, reliability and not lose the power. Here is the parts list so far: Retro Arms Aluminum Piston Head - X FPS Softair: Full Metal Rack Zero Shock Piston, Cylinder Head, AOE Nylon shim, Aluminum O-ring Nozzle (will be testing a Retro Arms Nozzle) Nuprol Stainless Steel Ribbed Full Cylinder (polished) E&L Tappet Plate (will be testing a RetroArms) SHS V3 Aluminium Spring Guide M100 SHS Spring Low resistance silver wire Dual signal wired Warfet set for Precock and full auto set to 50% I run it on 1200 mhA 20/40c 11.1v Li-Po. The rest is stock. I'm thinking getting a set of 13:1 gears and Replace the Bevel with a 9 tooth one to bring them down, from what I understand to something like 15:1. And a ZCI 22 TPA or a 28 TPA if I can find a short shaft one except for ASG, they seem to be rare in that price point. So question is would this need SS and/or TP spring fiddling. Also would that battery just be to weak for that kind of build ( Still don''t get how a higher C rating and mhA battery at 7.4 volts would affect trigger response), FullAuto is slower, therefore cycle is slower so trigger would be slower even with Precock, unless there is something I''m missing here? But its an AK from what I've searched in shops I can''t find a bigger stick type that would fit in the hand guard. And I have a M4 Buffer Tube Stock conversion planned, so I guess I can slap a PTS stock and fit a 1800 mhA 25/50C 11.1v Brick Li-Po in it , but would like to keep it, at least for now for now as Russky as possible. Any Ideas how that Gear/Motor combo would work, if at all would be appreciated. Also if there is a way to use the stick battery and have a passable trigger response with the Precock that would save (a whole new replica) amount of money.

Hey peeps. Does this count as a factory defect? Didn't even run these with just a motor. Never been even set on a half GB shell. Guess how it happened and what Brand?

Sorry for the typo. And thanks for the answer AH. The lady in my local electronics shop could not figure it out from a photo so I asked. And now I know. Totally of topic but guess what hapeened here?

Hey guys, Can any one tell me what typa the dual signal wire connector is on gate mosfets. Thanks.