All Activity
- Past hour
-
Enid_Puceflange reacted to a post in a topic:
New Viva Arms "Ranch Boy" Ruger 10/22 GBBR (Samson-style stock)
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Selling my Secutor Corvus, Glock 17 & Recover Tactical 20/20 carbine kit This thing is a beast and very fun to use in tight cqb arena or large outdoor fields. Sale includes the Sector Glock 17 Recover Tactical carbine kit 1 x co2 mag 1x Green gas mag 1x Gas drum mag 1x Tracer/ suppressor 1x Holster retail box i did have a drum mag for it but unsure if it still works, this will be included if i can find it pistol works as it should. Co2 mag has never been used, green gas mag is gas tight but missing a base plate. The drum mag is gas tight and work great but was glued at the top by a previous owner. so is now permanently gas tight 😂 can be posted but prefer collection or local delivery reason for sale is leaving the hobby200.00 GBP
Barking
-
Firstly I wanted to preface this by saying, I wasn't entirely sure exactly where this thread would/should belong, so apologies in advanced to the forum mods if it's in the wrong section (if so please move accordingly). In short my question is as follows; "Does anyone know what specific tool is required to unscrew the APS Cam870 (MK3/MKIII) bolt pin retaining plate?" _______________ The longer story; So recently I've been working on trying to finish my custom M-41A Pulse Rifle (dw, I'll document that entire build process elsewhere once finished ), but I've unfortunately since encounter a rather annoying issue. When showcasing the build to some peers I happened to notice that the APS Cam870 (MK3/MKIII) that was installed inside the PR some time back was no longer feeding shells properly!! After a tediously long process of dismantling, inspecting and attempting to reassemble/reinstall everything I finally found the issue; Namely that the Cam870s internal bolt pin had deformed over time!! Apparently a well know issue as a result of dry firing them (wish I'd know this beforehand). Prior to just giving up replacing the entire Cam870 bolt (which is still an option, they're relatively cheap), I found that APS do also sell a "reinforced firing-pin". As such I figured I'd see if I could simply replace the part that was causing the problems, but unfortunately I personally have no idea and have not been able to find any additional info regarding the specific tool(s) used to unscrew this plate! Any information that anyone could provide regarding the specifically required tool(s) needed to disassemble and ultimately fix this part would be greatly appreciated. Thanks in advanced CoCost
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! Viper Rifle Sling in Tan Used but great condition. Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry. Any questions, pls ask!7.50 GBP
High Wycombe , Buckinghamshire - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! 4x Mk14 Magazine holders, for attaching to a plate carrier etc. *Magazines not included* Used but great condition. Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry. Any questions, pls ask!10.00 GBP
High Wycombe , Buckinghamshire - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! LiPo Battery Balancer and Power Supply, as well as Battery Charging Bag. Connectors for most battery types. Used but great condition. Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry. Any questions, pls ask!15.00 GBP
High Wycombe, Buckinghamshire - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
Hello! Brand new Soldering Set, including Soldering Iron, Solder Pump, Stand and 'Helping Hands' tool. New and never used. Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry. Any questions, pls ask!10.00 GBP
High Wycombe , Buckinghamshire - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! Magazines for MP5 3x Mid-Cap Used but in great condition Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry. Any questions, pls ask!15.00 GBP
High Wycombe , Buckinghamshire - GB
-
ak2m4 reacted to a post in a topic:
Buying bolt carriers from asia
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! Magazines for Mk14 3x Mid-Cap (w/ MagPuls) 1x Hi-Cap Used but in great condition Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry. Any questions, pls ask!20.00 GBP
High Wycombe - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! Strike Sytems Plate Carrier in Tan Used but in great condition Comes with a variety of pouches, as well as a rifle sling. Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry. Any questions, pls ask!75.00 GBP
High Wycombe , Buckinghamshire - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! CYMA MP5SD ~310fps Used on two skirmish days but has not been used/fired for a good couple of years. As such, it is sold as seen. Internals are stock. Will include two additional stocks; one fixed and one sliding CQB style. Also includes one mid-cap and one hi-cap magazine. Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry.90.00 GBP
High Wycombe, Buckinghamshire - GB
-
MSSNAFU reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
shatis reacted to a post in a topic:
Buying bolt carriers from asia
-
MSSNAFU reacted to a post in a topic:
Cringe in Airsoft
-
shatis reacted to a post in a topic:
Buying bolt carriers from asia
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hello! CYMA Mk14 EBR ~310fps Used on two skirmish days but has not been used/fired for a good couple of years. As such, it is sold as seen. Internals are stock. Will include the Harris-style bipod, foregrip and magnified scope. Also includes one mid-cap and one hi-cap magazine. Will not consider Swaps. Open to reasonable offers. Collection is preferred. Will courier at the buyer's expense - price determined upon enquiry.150.00 GBP
High Wycombe, Buckinghamshire - GB
-
Custom Ghillie Suit (cloak ghillie trouser chestrig) Competition Proven
GhostGhillie posted an advert in Gear
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Custom Ghillie Suit + Full Gear Set – Competition Proven Hand-crafted ghillie suit, fully customised for realism and stealth. Comes complete with KMCS Cloak XL, Novritsch ghillie pants with shoulder straps, and a blended crafted chest rig & hpa tank bag 🏆 Proven Performance: Used to place 3rd at Kicking Mustang Hide & Seek 2024. Features: breathable mesh base, 3D layering, natural foliage loops. Full set: £260260.00 GBP
- GB
-
Hudson reacted to a post in a topic:
Cringe in Airsoft
-
PopRocket123 reacted to a post in a topic:
British Forces weapons
- Today
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
Pretty much as the title🙂 I don't know too much about the sniper types as I don't have the paitience or mobility for the role. I think one or two of the cylinders are stainless steel, and there is a metal piston in one of them, plus all the odd bits pictured. Doubtless there are parts missing or not obviously damaged. This is why they're in the boneyard 🙂 Total is about 7.5Kg of bolt action Airsoft bits, for spares repairs. £25.00 including p+p UK only and Paypal only please. (btw please don't use friends and familly - I don't begrudge them their pound or two, and it makes sorting out the p+p much quicker & easier as address etc. is not shown on a f&f transaction).25.00 GBP
-
Custom Vietnam spec M60 (A&K) with ORIGINAL & LCT parts
Austeyr commented on Uleu's advert in Other Electric
This is a work of art, truly -
Love pistol & shotgun games, so rare to hear of them these days😕
-
My local site has them up for pre order and apparently you can use the multishot bases from a TRMR with them
-
Time Left: 6 days and 21 hours
- FOR SALE
- NEW
Crib Gogh constrictor jump pack 40L bergan Rare bit of kit that's not available for the civi market, manufactured exclusively for the RM, SAS and SBS IYKYK100.00 GBP
- GB
-
MUH FAIRY DUST
-
I have to say, I've only done a couple; both by the lightfighter crew back in the day and really enjoyed the Halloween events! Pistol & shotgun only, which made things much more interesting, some cracking design and thought put into them and overall just great fun! Can't speak for any these days though; last one was about 2008/9
-
Due in early November, based on the Nov SSQ system, so if you're already into the platform then mag availability won't be an issue for you. 1J out of the box, can change quite easily using the various nozzles already on the market for the platform. Rifle and magazines available at https://www.raresoft.co.uk/product-page/viva-arms-ranch-boy-gbbr
-
- 6
-
-
-
I have always done this, but UPS still refuse to use their eyes and demand I fill in one of their stupid declaration forms. Best to just avoid them as a carrier altogether. The best carrier I have found (certainly from WGC Shop at least) is EMS
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
Up for grabs is a very, very long project of mine. A&K M60 "VN" that I have been lovingly working on for a number of years. The base A&K model is not really accurate to the real thing, having a mix of fake & M60E3 parts, which for a nerd like myself was pretty unacceptable. I won't bore you (too much) with the details and history but here are the modifications done to it to closely match a 1967 vietnam era spec M60: LCT Trigger assembly added with correct profile and correct ORIGINAL leaf spring added Modified top cover, M60E3 profiles filled, filed down and then painted the correct black gloss color Body painted to match the parkerized grey tone of the original, instead of the flat black they come painted as Furniture lightly painted with black gloss to try and immitate the rubberized texture of the real thing 3rd brass deflector hole drilled, M60E3 receiver had only 2 TOP (?) rear sight added, steel made, parkerized finish, rather nice I've got to say Carrying handle lugs filed down so the handle can fold all the way down "Lightening" cut from the barrel release lever removed Trunnion has been marked with trades, NEW ENGLAND MAREMONT M60 Handguard sling swivel has been moved to point upwards, unlike the angled ones on post 1970 M60s ORIGINAL gas cylinder plug/screw added and safety wired to the gas cylinder LCT STEEL mag/bandolier plate holder, the A&K ones all inevitably snap as poorly spot-welded ALSO comes with 3D printed magazine/chute bracket. All Vietnam war M60s had those installed by default, "mag" plate came later Original 1975 dated M60 bandolier to use with the box magazine, more accurate and frankly more convenient as it doesn't stick out nearly as much as the A&K one. I still don't know what A&K was smoking when they put these guns together, but it at least made for an entertaining project lol. Internally it has an airsoftpro hop-up installed, new spring and motor, upgraded micro-switch, it's deans wired in the stock, and the fire-rate increase/decrease wheel has been bypassed. I've always babied it as although these guns looks tough as nails, some parts can be fragile. The bipod yoke is still in one piece. Would recommend a tightening of ALL screws as well as those do come loose over time and some are missing from the handguard inserts. Works, though keep in mind it has been over 5 years since I have actually fielded it & played with it so may need some TLC. Back then it used to shoot at around 350 and had a relatively slow but satisfying fire-rate. Has mainly been a reenacting/display gun since. Any questions, picture requests etc, do please let me know and I will be happy to clue you in. Can ship, though prefer collection somewhere in the west mids.600.00 GBP
- GB
-
Time Left: 6 days and 21 hours
- WANTED
- USED
Looking for a m249 box mag in this style. Let me know if your selling.Ask for price
-
But but but it's tokyo marui which means it's mega good and worth loads of money!!!!!
-
£120 for a TM springer! I want to know what they are smoking?
.jpg.f77ea671b0eb9f99d2cdace88363c673.jpg)
