Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. mightyjebus left Positive feedback for Regamuffin
  3.    Austeyr reacted to a reply to a status update: A little while ago a dude messaged me about G&P Peq 2's, I left the chat and now
  4.    Austeyr reacted to a post in a topic: Perun AB++ MOSFET showing steady purple LED
  5. Lord_Mandrake
    OK, thanks very much for all your help – greatly appreciated. Guess I'd better get on YouTube and learn how to solder wires together 🤭 As you say, failing that I'll try to find a tech to sort it.
  6. Austeyr
    Jesus 😳 You'll need to replace that piece for sure. You should be able to cut damaged part out and then resolder the connector back onto the good wire. It'll obviously be a bit shorter though so make sure you will have enough wire in place before the snip, if not then you'd need to strip the wiring and rewire an extension in and then protect it with shrink wrap. If you do the latter then make sure the wire is the same as the perun such as gauge otherwise you may run into issues (I'm not 100% on that as I've never done that but best to keep everything the same as it was!) If you're not sure on the process, it should be a simple and (hopefully) cheap fix for a tech
  7. Lord_Mandrake
    Ah, I think I've found the issue ... the black wire from the Perun to the battery was slightly damaged so i bodged some electrical tape around it. I've just checked it and it's hanging by a thread 😕 Sorry if it's a dumb question, but can you suggest the best way to repair this?
  8.    HZR13 reacted to a post in a topic: The 'What have you just bought' Thread
  9.    GeorgePlaysAirsoft reacted to a post in a topic: The 'What have you just bought' Thread
  10.    GeorgePlaysAirsoft reacted to a post in a topic: The 'What have you just bought' Thread
  11. Gunboat Diplomat
    Interesting, I'm planning to HPA this one and I know the Maxx units are hit and miss when it comes to nozzle alignment.
  12. Austeyr
    Yeah, it can be triggered by something as simple as holding the trigger down when you connected the battery or something like dirt/debris on the magnet. Best (And easiest) bet would be to open it up and check around the trigger area and see if anything has moved and recheck your positioning. You can also diagnose with the case open which will help too. A while ago a friend had an issue with his Perun and he had a shorted wire which had damaged the unit and that was also throwing up the purple light iirc - But fingers crossed for you that isn't the case 😂
  13. EXIT
    EXIT joined the community
  14. Lord_Mandrake
    Thank you very much - somehow, I missed that part, my bad. By "closed", does it mean the trigger is being permanently activated?
  15. Today
  16.    ButcherBill reacted to a post in a topic: The 'What have you just bought' Thread
  17. Adolf Hamster
    This is the issue with giving cookie cutter replacement part lists. A given product might be great, but if it aint a good fit for the gun it aint a good fit. And it doesnt matter how premium it is, for as much as a fusion engine costs the internet is littered with "how to align your nozzle" guides when the reciever doesnt quite match up.
  18.    Baser reacted to a post in a topic: British Forces weapons
  19. The_Lord_Poncho
    A specna stainless steel inner barrel (apparently the same as fitted to their 'prime' series). Absolutely shocking - the crowning is so wildly uneven, all shots through it consistently veer wildly off to one side. I'm considering chopping it, and re-crowning - even a DIY job can't be as bad as the current factory finish. Avoid!
  20. Shae
    Shae joined the community
  21. Craigb

    Tokyo Marui MP7

    Craigb posted an advert in Gas Rifles

    Time Left: 6 days and 22 hours

    • FOR SALE
    • NEW

    Tm mp7 gbb fantastic little smg great recoil 5 gas tight mags quick detach suppressor new aim point high riser sent via 48 hour parcel force (£15) 07999501693 [email protected]

    415.00 GBP

    - GB

  22. GRIZZLYBEAR

    Time Left: 6 days and 22 hours

    • FOR SALE
    • USED

    4 Tokyo marui mws magazines They have had the "green gas mod" so they hold approx 3x more gas the standard. PayPal or banks transfer £40 £5 postage edit: 2 remaining

    40.00 GBP

  23. BYRNEMORGAN52 left Positive feedback for MoriMoriMan
  24. Isawatree

    Bolt br47

    Isawatree posted an advert in Boneyard

    Time Left: 6 days and 22 hours

    • FOR SALE
    • USED

    Gearbox needs building all parts included. buffer tube has been hollowed out so you can rear wire recoil will not work well without new buffer tube externally very good condition. Installed Cyma zeus mosfet, confirmed working before snipping the wiring to feed into the stock tube (thanks bolt) ASG Ultimate bearings Cyma zeus mosfet Quantum bucking and nub SHS M110 spring Looking for £100

    100.00 GBP

  25. StaffSgtSherwin

    Time Left: 6 days and 22 hours

    • FOR SALE
    • NEW

    For sale 2 x Nurpol 120rnd L-Mags for M4/AR rifles Polymer mags Never used Postage included in price

    15.00 GBP

  26. DerDer
    Had some unpleasant experiences with some hop up units in the past. Lonex AK hop unit that required filing and cutting to fit together. Required modification to assemble it and attach it to the barrel. Did fit in a Galil that was quite picky with hop chambers. Then there was a LCT HK33 which I tried three aftermarket hop units. One wouldn't fit at all. The second fit the AEG but after assembly wouldn't allow a magazine to lock in. The third did but just wouldn't feed. One of the units was a Retro arms and the other a G&G, going off memory. Eventually just put the stock unit back in and sold it at a heavy loss to a local at a site.
  27. Cannonfodder
    Iirc rift/white sphere tactical use him too.
  28. StaffSgtSherwin

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    For sale CYMA Glock AEP is two tone blue but has been krylon spray painted green in its past life I do not have the battery or charger for it but they are easily found online Comes with 2 x extended capacity magazines Fire modes - auto/single FPS - approx 220fps on 0.2 Postage included in price

    40.00 GBP

  29.    PopRocket123 reacted to a post in a topic: Gun picture thread
  30.    Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
  31. Austeyr
    To be fair, your linked post does also have the error code colours... So it has started up, because it's showing a light 🤔 According to Perun the purple solid light means the trigger contacts are closed
  32.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  33. Austeyr

    A little while ago a dude messaged me about G&P Peq 2's, I left the chat and now typically need the link again. If you could dm me the place again please 😂

    1. GeorgePlaysAirsoft

      GeorgePlaysAirsoft

      somogear do peq2s now they have a version with all the features and a more basic one without IR

    2. Austeyr

      Austeyr

      Ooooh cheers, I knew of the IR one but didn't wanna fork out £250. The non IR one is exactly what I'm looking for!

  34. Prolish
    Just to clarify, rep handguards fit perfectly on the VFC MP5 - I’ve tested it with both the early skinny handguard, as well as the aftermarket surefire one (pictured as proof!). Additionally, VFC is also compatible with all (that I’ve tested so far) real optics and optics rails too, and I’ve tested quite a niche range. Side note- if anyone is after the burst lower, I’ve got the original one off my MP5 that I’d be willing to dig out and part with.
  35. ButcherBill
    Then my apologies
  36. Lord_Mandrake
    Thanks for trying to help, however the answer you found refers to the programming modes, not the error codes that I'm asking about. The MOSFET is not starting up at all when the battery is connected, therefore, it has detected an unspecified error, indicated by a solid purple light.
  37. ChrisHB96
    ChrisHB96 joined the community
  38. ButcherBill
    Took about 30 seconds to google this... No sound signal while LED glows purple means, that the DMR mode is disabled. https://perunairsoft.pl/abplusplus.pdf
  39. Lord_Mandrake
    Hi all, having some trouble with my M4 AEG. Usually, when I connect the battery, the Perun AB++ flashes green for a few seconds then beeps once loudly with a solid green light = good to go. However, it now just shows a constant purple light and never does its usual handshake with the motor. I've checked the diagnostics codes in the manual but it doesn't mention a solid purple light. Can anyone help?
  40. Lozza17

    Time Left: 6 days and 20 hours

    • FOR SALE
    • USED

    For sale, used but excellent condition Aero Precision Atlas R-one 9.3" M-lok handguard for the AR15, Black. Boxed with all of the mounting hardware. Real Steel. £80 posted (To UK mainland only)

    80.00 GBP

  41. milsimtactical

    Time Left: 6 days and 20 hours

    • FOR SALE
    • USED

    tm mp5sd NGRS come with 8 mag in total 3 lipo battery Odin Speed loader adapter upgrade prometheus EG barrel Purple Hob rubber samarium cobalt motor

    650.00 GBP

  42. Johndaniel4863
    Hi everyone what would be a fair price all in for the following: As new DE UTR45 7xmagazines Acetech tracer Eotech clone M600 clone AN PEQ15 clone with red laser Double pressure pad Its just been sat as an impulsive buy from new but never used in anger sadly
  1. Load more activity
×
×
  • Create New...