All Activity
- Past hour
-
Actually …. the washing machine is not an absolute no. But whenever I’ve needed to give vests, chest rigs etc a good clean I have dunked them in the bath after me, left them in the bath or over the bath to drip overnight and then hung up. For the washing machine: dismantle / remove any possible separate pouches Ensure every pouch, pocket, lining etc is empty turn it inside out and zip it up, buckle it etc (on the assumption that any dangly bits such as fixed pockets, straps etc will then be inside the main body) put it inside something (the something would ideally be a net laundry bag, but could be a pillow cover or other fabric bag - this aims to protect the vest from your washing machine drum and your drum from the vest) run the machine on a reasonable setting, such as not the fastest spin Be amazed at how pristine it is on completion and don’t complain to me if it gets ripped/your machine breaks down/you get caught by your other half
-
Most times I just hang it up outside to air off. If it gets particuarly bad, put some washing gear in a bucket with warm water and give it a couple swirls/dunks. Leave for about 30 mins, rinse in clean water and hang dry.
-
Time Left: 6 days and 23 hours
- For sale
- Used
Whole load of bits selling only selling this lot as bought an expensive thing postage available at prices stated or collection either form coalville Leicestershire or I often play at SIXMIL CYMA platinum mp5k variant This one : CYMA CM.041L SMG-5K M-LOK Upgraded Version Works fine but only on high discharge 11.1v Comes with mag mid cap I’ve only used it for 1 game of about 1 and half hours had for around year tho Comes in original box £180 posted Krytac kris vector 5 mids 1 drum mag angle customs I believe 1 broken mid cap Fully functional works well all fire modes work Reluctant sale but need money for recent purchase £430 posted HPA KINGS ARMS VSS mancraft PDIK mechanical engine 5 short mid caps 1 large hi cap Set up as dmr semi only Real wood I just don’t use dmrs and need cash for recent purchases Asking £500 posted Specna arms feather weight para m249 Box mag works fine other than sound control being temperamental as usual Weighs around 4 kg if that £200 posted Steyr scout 3 mags + loader Scope Sling mounts and sling both you usually have to buy extra Bottle of .4s Mint rifle absolutely love it but needs must I used .4s on this and can hit targets at 70M can absolutely use heavier rounds and probably get further New this package cost around 510 so asking £370 posted Golden eagle gas shotgun Short version Holds Gas fine both 3 and 6 shot functions work fine £110 posted WE px4 storm 3 mags 1 extended Holster Cool little gun like it a lot but barely use it £100 posted TM MK23 upgraded carbine bundle Tm mk23- upgraded Crazy jet barrel Hadron TDC hop adjuster Hop and nub can’t remember which put it together ages ago I believe it was maple leaf basically the build KM showed a good few years back shoots bloody miles Suppressor is custom gutted and filled with custom baffles and expansion chambers 3d print carbine kit nice and light but solid build HPA adapter to mp5 mags from air tac Scope super cheap basic one Front mag holder Over all this cost approximately 350 ish to build maybe a bit more asking £250 posted Unknown brand G17 + 1 leaky mag £55 posted P226 we I think no mag tested with my other p226 mags works fine £45 posted Also have 2 AEP g18s battery’s chargers and bunch mags if anyone interested 80 for bothNO VALUE SPECIFIED
- GB
-
Hi, can anyone recommend mid caps which fit and feed well in this? Preferably "classic" stanag style, and preferably metal shell
-
Moon on a stick springs to mind.
-
Most of the time I just hang it up and leave it to air. If it's bad, I'll give it a hose down first.
-
Flailing_Ben left Positive feedback for iesty2711
- Today
-
Dunk it in a bucket of water or hose it off , leave it to dry .
-
snuff reacted to a post in a topic: Pain in the ....
-
But they are good to hunt and shoot...😁
-
Time Left: 6 days and 22 hours
- For sale
- As new
KRYTAC KRISS® Vector V2 AEG - £519.99 SEMI/BURST/FULL AUTOMATIC BRAND NEW COMES WITH - -Aim-O Flip-Up Mini Red Dot Reflex Sight (Black) -£49.99 -2 MAGAZINE -£29.99 (60£) -1 VAPEX 7.4v 1450mAh 25C LiPo Crane Battery -£17.99 -1 Specna Arms 7.4V 1200mAh -£12.99 -1 Dummy Silencer £10.99 -1 Skeleton Front Grip -£9.99 -stock ironsight ------------------------------------ Tatal £682 I can post it if necessary appon request£600
WAKEFIELD, WAKEFIELD - GB
-
-
-
Stefan12 joined the community
-
-
Time Left: 6 days and 22 hours
- For sale
- Used
Up for sale is my TM SGR-12 Mosfet, including all the wires needed to plug and play. I removed this to replace with a custom wiring loom so I can add pre-cocking to the gun. This mosfet works just fine however. This will be an ideal replacement for any dead mosfets in: TM SGR-12, TM AA-12 or the CYMA SGR-12 clone. All the parts are there, fuse, fuse holder, motor connectors, insulating rubber, plastic cover, screws to attach the fet to the gearbox, power LED and the connecting plug to attach to the trigger wiring loom. Please note: It has been rewired to deans. This has been used, but not particularly heavily, always with a 7.4v Lipo. Paypal is fine, looking for £35 posted, £30 collected from CB6.£35
Ely, Cambridgeshire - GB
-
After a particularly sweaty day on Sunday, my chest rug was left a little damp. How are you all cleaning yours? I know I can't just throw it in the washing machine! Is Fabreeze the way to go? 🤷♂️
-
Time Left: 6 days and 22 hours
- For sale
- As new
Ares L85 ETU (Product code AR-85-EFCS). Had this sitting around a while as got it for a project that I never ended up collecting! Never been used, removed from packaging to inspect but put back inside and not used since. I'm not planning on getting an Ares L85 anytime soon, so this is surplus to requirements. Looking for £40 all in. Paypal is fine, happy to post or collection around CB6 and i'll do it for £32 cash.£40
Ely, Cambridgeshire - GB
-
-
Hard to really say it's worth it when you could build out a VFC AK74M pretty close to that for about the same or slightly more. And it wouldn't be a ten year old design pretending to be a lost relic. GHK AKs were great in their day but the V2s especially have a number of really annoying flaws, and aftermarket doesn't really fix a few of them. This would be half the price if the V3s weren't so dogshit that everyone got rose tinted glasses for the V2s.
-
This. Also it's worth remembering that we're using things which are relatively mass produced and put together without any precision or tuning so 2 identical guns could easily produce different noise levels depending on whether they were put together at the start or 10 minutes before the end of shift
-
Cannonfodder reacted to a post in a topic: What is the quietest standard AEG?
-
Overpriced, but i kinda like the paint job. (Grip and handguard look shit though.)
-
🤢🤮
-
Macks airsoft dreamers of the week thread
Cannonfodder replied to Mack's topic in General Discussion
What are everyone's thoughts on this? -
Tackle reacted to a post in a topic: Pain in the ....
-
Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Time Left: 6 days and 21 hours
- For sale
- As new
Full box, few minor marks on the top but almost good as new, had to turn it on to double check it wasn't the real one I'm selling. It's a great repro only real give away is the red dot not being the full holographic but that's like £400. NV works on this, goes to an IR diode. Just found an small allen key option to mount the optic to rails in the box, always wondered why they went with the huge flat head bit there, so it comes with a choice. £85 posted£85
-
Pburn joined the community
-
Sorry to hear Snuff. Even if you have to reduce the number of game days, be thankful you can still play. Some of us(me) can't play at all anymore 😢
-
EDcase reacted to a post in a topic: Pain in the ....
-
-
Ghillies are by far the most boring players.