All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale
- Used
I am clearing out, as you can see I'm a TM fanboy 🚀 Looking for one buyer to pick up everything 💰 Collection only, cash or bank transfer on collection 🏦 North London, N6 🇬🇧 Require valid defence 📰 This is what I have for sale: Tokyo Marui MP5A5 High Cycle AEG Full working order No mods This thing is bonkers, it's rapid (I ran it on an 8.4 LiPo) and the hop is crazy good like with all TMs, has really good range for how small it is Has signs of wear and tear I have installed a RIS rail that can be removed Comes with the TM high capacity magazine 400rd Comes with 4 additional magazines / some are winder 200rd, some are 100rd speedloader fed The bolt catch is a little bit wonky but it still works Comes with a case Value contribution to bundle - £150 Tokyo Marui VSR 10 G SPEC OLIVE Full working order No mods Original box Excellent condition (never even took it to a site) This is the version that comes with the TM silencer Comes with 2 original magazines Value contribution to bundle - £120 Tokyo Marui M870 Gas Pump Full working order No mods Original box I have lost the gas tank The pump is a bit shaky - this is a known issue with the model but it works The receiver is scratched - see photos Comes with one original shell Value contribution to the bundle - £120 G&G Combat Machine 16 CM16 R8-L DST AEG Full working order Fantastic condition Original box Come with grip with quick release bipod Modded with a wicked SHS Motor for increased fire rate Modded with a tight bore barrel Two original G&G 450rd winding magazines Value contribution to the bundle - £150 Bunch of tactical gear All of it used I ran out of photos, sorry Ammo box NATO UK Viper Tactical Vest Some Italian MOLLE carrier Tactical gloves fingerless 3 pairs pants M/L 2 viper MOLLE holsters 4-5 assorted MOLLE pouches Value contribution to the bundle - £50 The total here is £590 Discounted to £500 for a rapid sale Thanks£500
London - GB
-
-
-
As the man above said, if its for shooting at, whatever takes your fancy that you don't mind getting damaged. I'd be more interested in what your planning on using as a backstop, what's behind your garden that needs to be considered if any shots go wide of the target (or through it ?🤕), especially in regards to airguns. PS I find jam jar lids suspended on a line by clothes pegs make effective targets for airsoft, get a nice "ding" when you hit them.
-
-
Tackle reacted to a post in a topic: Show us your plinking target setups
-
Ah. Good point. I didn't read that properly. I wonder if that means there will be Redux BBs and also a competing identical product from whoever takes over UK operations at Warhead?
-
DBGXXI left Positive feedback for Scott Clark
-
Hudson left Positive feedback for OliverAxel
-
-
It could be worth trying. Although you're gonna have X psi requirement to get a good cycle, which might put you over the limit so you'd need some method of dropping it back down. Shimming a standard rocket valve does the same thing as an npas, and might be more repeatable, or a shorter inner barrel can do the job too (dont worry if it's shorter than the outer)
-
I have 4 TM MWS variants that all have Federal Concepts NPAS valves, but I have gone done the HPA route and bought adapters from airtac. question I have is should I change the NPAS valve back to standard as I am seeing a 10 fps fluctuation which I wasn’t expecting with HPA?
-
TheFull9 reacted to a post in a topic: The 'What have you just bought' Thread
-
-
Cannonfodder reacted to a post in a topic: Warhead UK rebranding to Redux Airsoft
-
Time Left: 6 days and 23 hours
- For sale
- Used
This is my Golden eagle M56al shotgun ( tri shot ) ive only skirmished it a few times so there are some scratches. Im sellimg due to not using it enough and need to slim line my collection a little. It comes with 19 shell 8 are nuprol and 11 are GE shells the shell have got a whit mark on back so i could tell which were mine from other players. The gun also comes with bandolier as seen and shell holder on the stock and one that could be attached to webbing ETC Ask for 60 with fee and postage£60
-
I just draw a rough circle on a cardboard box and prop it up on a plastic garden chair. Imo there's no point in buying anything fancy if I'm just going to shoot holes in it
-
Time Left: 6 days and 23 hours
- For sale
- As new
Custom build based on the ICS Lightweight Peleador featuring a custom paint job, ICS split gearbox, Perun V2 Hybrid mostfet with Clicker. Build as a project for fun but now it's just sitting in a rifle bag unused. Would make a truly unique CQB weapon. Message for further details. Pick up from North Bristol area. Can be seen working.£175
Bristol, Avon - GB
-
And if there was any doubt as to the return of the TM G17.5 MOS, TM have confirmed they will be exhibiting at the 63rd Shizuoka Hobby Show from next Wednesday - May 14th. 'TM will have a "Test Firing Corner." at their booth to allow trade visitors the opportunity to experience the performance of the Tokyo Marui G17 Gen 5 MOS Gas Blowback Pistol, enhanced with a mounted Micro Pro Sight'.
-
-
My interpretation was that they will be dealing directly with the factory and selling the same BBs under their own name.
-
Time Left: 6 days and 23 hours
- For sale
- Used
Would ideally like to sell as a complete package TM NGRS M4 - has a mosfet installed and wired to the stock TM Glock 17 Gen4 - never been used in a game, comes with olight TM Desert Eagle nuprol hard case 4 x TM mid caps 2 x Magpul EPM collection only St Helens Merseyside any questions send me a message£650
St Helens, Merseyside - GB
-
Time Left: 6 days and 23 hours
- For sale or swap
- Used
Specna Arms Mk18-based DMR Serviced and Build to sell - Fully upgraded - FPS: 379-384 (for 400fps limit) - can power up to fit higher dmr limits if required Brand New Parts; Rear-wired (deans) Perun v2 optical mosfet - currently set to: Safe/Semi/Semi - can also set to: Safe/Semi/Safe, if preferred - program card included Perun v2 Clicker PRO ZCI poly rotary M4 hop Maple Leaf macaron 60 and XT omega nub XT 22TPA high torque motor, XT piston head, XT cylinder head, XT 21mm o-ring nozzle ZCI 8mm bushings JST m120 spring Cyma steel rack piston Solink 16:1 Gearset - both short stroked by 2 FMA 107mm suppressor FMA short grip TT Rail covers XT m105 spring - power down to AEG ~330fps Other; ZCI 509mm Tightbore inner barrel Rifle Scope - Nice and clear, however is slightly off and won't zero, so is mostly for show - flip up end sight is effective enough, if you prefer to remove it 2x Hi-cap mags Has functional bolt-hold-open feature --- As stated above, this is a fully upgraded gun Very easily powered down to aeg power limits with aeg spring included and quick change buffer tube system. Then simply change the auto fire from safe/semi to 2,3,4,5 round burst or auto I would recommend setting to 3 round burst for AEG power, and keeping the rest of the settings as is. >Test fire video< - test video is gun firing with; 7.4v li-ion, .28g, light wind, clear day, over long distance I would recommend using heavier bbs than the .28g used in the test-fire video to get the most out of the effective range would recommend .32g - .36g bbs --- Rail has remnants of previously removed red two-tone, as seen in pictures I will make efforts to remove these, however some red staining can be seen and may persist on the lettering. Looks nice, in my opinion, in some areas as it also has a tint-sheen to it. Your opinion may vary. Can also remove and clean up stickers on right side of gun if preferred I planned to take this DMR to a future game day in June, hence the branding ~~ Collection (preferred) - £350 or Posted (via PF48) - £365 Any questions, feel free to ask£350
Doncaster, South Yorkshire - GB
-
Welcome 🤚 Its a bit before my time so I don't know what may have changed mechanically since then but the minimum you should do is open up the gearbox and clean/re-lube. You'll likely need to change the piston O-ring and change the main spring. I'm sure others will comment with better info.
- Today
-
Colin Allen reacted to a post in a topic: The 'How Did Your Airsoft Day Go? Thread
-
Hi all Had an Tokyo marui AK47 since about 2003, used it a lot back then but ever since it's been kept in storage. Last time I did use it maybe around 2008, it was chronod and I could see it had lost some power, I imagine its lost even more now. I want to bring it back to life, is there anything I should consider due to its age? And is there a relevant upgrade kit for that age+ model AK47? Many thanks
-
AirsoftElite joined the community
-
-
-
Great day out at Invicta Woodlands. Usual good vibes, some great weapons and tactics deployed, highlight was a HPA M249 LMG with a steam/flash/tracer device on the front of it, you could hear it firing across the field, such a distinctive sound. The guy running it had to go out and reload a couple of times mid game, that’s a lot of ammo given the 2500 BB’s in a box mag. The ghillie snipers taking to the (literal) swamp to flank was exceptionally good work! Played 4 games, capture the flag and hold the base/location, swapping spawns to give both teams the same advantages/disadvantages. Was close until the last game when a few of the red team went home (or we ran out of steam and blew it). Took my recently purchased and rebuilt boneyard Cyma MP5 which shot admirably for its first day on the field with me. Chronoed right at the field limit and shot laser straight. I took the 1200 round drum mag and used it for the first game but switched back to mid caps for the other games as just blasting away on full auto is fun but not very tactical and I found it took something from the game? Usual few not taking their hits and there seemed to be a few players with very long range DMR’s who were impossible to hit back, even though I was right at the max limit on the chrono, 340 vs 400fps makes a difference but it felt like a bigger distance than usual. Food truck was ace, bacon, sausage and hash brown roll for brekkie and a burger with chips made a great lunch. Bought a mock suppressor for the MP5 from platoon stores on site just to add to the look. Overall throughly enjoyed, thanks to AJ and the team!
-
RF1995 joined the community
-
Time Left: 6 days and 22 hours
- For sale
- Used
Real steel stuff for sale Blue force gear stuff UDL padded bungee sling with HK hook £60 Small whisper utility pouch £30 Ten-Speed Ultralight Dump Pouch £30 Esstac stuff KYWI single pistol no inner but fits single double stack fine. £10 KYWI Single 556 shorty £15 KYWI side by side + gap £30 Ferro concept Slingster with genuine d loop, single HK hook and quick connnect to turn to single point £55 Genuine RS Pistol lanyard £12 Gunpoint gear plackard mount kit. Converts JPC ect into quick connect plackard mounts. £15 for both sets Source 400151 Kangaroo 1L with Pouch Multicam x2 £35 ea. Source 400033 Tactical 3L WXP Multicam £50 Genuine Jay jays belt LGE £15 Airsoft Angry gun L119A2 flash hinder. £25 all payments via G&S PayPal please. Postage is extra but discount on multi buys.NO VALUE SPECIFIED
, Kent - GB
-
byby25 joined the community
-
Rado reacted to an advert: For sale ANA Tactical EMR Digiflora IFAK pouch
-