Spec ops Posted January 22, 2012 Posted January 22, 2012 does anyone know why my G&G GR16 gearbox is blocking it will shot fine for 5 - 20 shots then it will block please help
RR01 Posted January 22, 2012 Posted January 22, 2012 does anyone know why my G&G GR16 gearbox is blockingit will shot fine for 5 - 20 shots then it will block please help Could you explain exactly what you mean by block? Is the gun stopping firing at all (i.e. pull trigger and nothing happens) or do you mean it will shoot for a while then stop propelling BBs out of the barrel?
padraigthesniper Posted January 22, 2012 Posted January 22, 2012 same happened to me in middle of skirmish check the body pins are in tightlly and the magazine it happened to me becuase of mag/body wobble a pin fell off
Spec ops Posted January 22, 2012 Author Posted January 22, 2012 Could you explain exactly what you mean by block? Is the gun stopping firing at all (i.e. pull trigger and nothing happens) or do you mean it will shoot for a while then stop propelling BBs out of the barrel? i fire on semi then it stops fireing i switch to full auto, it will fire then i switch back to semi then after a few shots repeat again same happened to me in middle of skirmish check the body pins are in tightlly and the magazine it happened to me becuase of mag/body wobble a pin fell off its nothing to do with the mag well, body or magazine
Supporters TPI Posted January 22, 2012 Supporters Posted January 22, 2012 it need`s wearing in it happen`s alot on KWA and other variant`s when brand new just keep shooting and it should eventually go away
Supporters Airsoft-Ed Posted January 23, 2012 Supporters Posted January 23, 2012 It sounds like your typical semi-lock issue, all the AEGs I've had have had it happen at some point apart from my G&G MP5, though never none of them have ever had it happen that frequently... I've always been able to make do and cope with it. It tends to happen when I try to fire quickly using semi. If you make slower follow up shots it ought to be alright, or just use auto all the time and fire in bursts. See if that helps.
Klayer04 Posted January 23, 2012 Posted January 23, 2012 I was under the impression it was when you fire in semi, but the gears dont make a full turn either because you dont hold the trigger down for a full revolution or were firing too quickly for your battery to cope and the same thing happens (a full revolution of the gears is not made). Simple fix: Just use full auto Its not difficult to pull one round off in full auto. Better fix: Bigger battery The better the battery, the quicker those gears will turn and make a full rev, creating a smaller window of opportunity for you to let go, miss time etc a trigger pull. You dont even need to upgrade Voltage. I bought a 8.4v 3300Mah battery to replace my 8.4 stock, and the rate of fire increased considirably. BE WARNED: Your gun may not be built to withstand the stress of super high ROF and there is probably a massive discussion somewhere on here about this, so its up to you to work out how much you want to increase rof etc. Just dont be stupid and whack a 10.8v Li-po In there or you might create similar conditions preceding the event we know as the big bang.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.