Enid_Puceflange Posted September 19 Share Posted September 19 (edited) 5 hours ago, MistakenMexican said: so I’ve now got two of these. The one below with aluminium slide, steel barrel and ACRO. I’ve built an identical one with steel slide and micro pro sight. Despite its bulk, the gen5 doesn’t seem to struggle shifting the ACRO and it’s pretty easy to aim. Thats cool, I just ordered an Acro for mine today Which means I’ll be putting a BoomArms MOS plate for an SRO in the classifieds Edited September 19 by Enid_Puceflange MistakenMexican, Mr Dellski and ButcherBill 3 Link to comment Share on other sites More sharing options...
MistakenMexican Posted September 19 Share Posted September 19 (edited) 39 minutes ago, Enid_Puceflange said: Thats cool, I just ordered an Acro for mine today Which means I’ll be putting a BoomArms MOS plate for an SRO in the classifieds Get the bomber or the angry gun ACRO plate. Boomarms and JKarmy have them. WGC also do the angry gun one and shipping is only £7 for orders under £90. Edited September 19 by MistakenMexican I can’t read at a gcse level apparently. Mr Dellski and Enid_Puceflange 2 Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 3 Share Posted October 3 Got one of my G17s back from West Laser. Posted it on Monday. Arrived back today. I highly recommend them 👍🏽 ButcherBill, Panama and Enid_Puceflange 2 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 3 Share Posted October 3 On 19/09/2024 at 21:12, MistakenMexican said: Get the bomber or the angry gun ACRO plate. Boomarms and JKarmy have them. WGC also do the angry gun one and shipping is only £7 for orders under £90. Thanks for that My Acro has arrived, WGC’s order has only just been dispatched 😂 Both ordered within a half hour of each other Tick followed Tock…… Quite digging your Ceracote job, but a bit bold for me Ive been tempted to get the soldering iron and Dremel out to do some stippling, though I’d like a knackered lower to practice on first Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 3 Share Posted October 3 49 minutes ago, Enid_Puceflange said: Thanks for that My Acro has arrived, WGC’s order has only just been dispatched 😂 Both ordered within a half hour of each other Tick followed Tock…… Quite digging your Ceracote job, but a bit bold for me Ive been tempted to get the soldering iron and Dremel out to do some stippling, though I’d like a knackered lower to practice on first to be fair, I have a cherry Red Cherry G17 gen3, so midnight brown is quite conservative 😂 yeah. You can’t control how quickly they get through the orders. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 9 Share Posted October 9 (edited) Angry Gun MOS plate arrived along with a set of Pro Arms steel sights. All went together easily with no modification needed Edited October 9 by Enid_Puceflange ButcherBill, MistakenMexican and Mr Dellski 2 1 Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 9 Share Posted October 9 7 hours ago, Enid_Puceflange said: Angry Gun MOS plate arrived along with a set of Pro Arms steel sights. All went together easily with no modification needed £15 on eBay and a bit of super glue, you can convert those sights in tritium sights 👌🏽 I can’t remember the hole size, I think it’s 1.6mm. Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 9 Share Posted October 9 2 hours ago, MistakenMexican said: £15 on eBay and a bit of super glue, you can convert those sights in tritium sights 👌🏽 I can’t remember the hole size, I think it’s 1.6mm. I might just investigate that The holes aren’t very deep, maybe 5mm I’ve already gone and filled them with titanium white acrylic, looks quite decent akchewallly MistakenMexican 1 Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 10 Share Posted October 10 2 hours ago, Enid_Puceflange said: I might just investigate that The holes aren’t very deep, maybe 5mm I’ve already gone and filled them with titanium white acrylic, looks quite decent akchewallly That’s about right - the fishing lure tritium vials you get are about 1.6mmx5mm. You can sometimes get watch specification tritium vials from Switzerland which are brighter. They tend to be a lot more expensive but it’s still cheaper than buying pre made tritium sights. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 10 Share Posted October 10 7 hours ago, MistakenMexican said: That’s about right - the fishing lure tritium vials you get are about 1.6mmx5mm. You can sometimes get watch specification tritium vials from Switzerland which are brighter. They tend to be a lot more expensive but it’s still cheaper than buying pre made tritium sights. That’s definitely on my shopping list, I’d better go have a search about for them 👍 Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 12 Share Posted October 12 Had another one in Elite Midnight ButcherBill and Mr Dellski 2 Link to comment Share on other sites More sharing options...
danf1234 Posted October 12 Share Posted October 12 Could someone please tell which is the correct 6.03 laylax barrel for the TM G17 G5. Is it the 97mm 6.03 for the Glock 18c? Link to comment Share on other sites More sharing options...
Krisz Posted October 12 Share Posted October 12 (edited) 32 minutes ago, danf1234 said: Could someone please tell which is the correct 6.03 laylax barrel for the TM G17 G5. Is it the 97mm 6.03 for the Glock 18c? Stock pistols usually come with 97mm or similar length inner barrels. I don't spend money on 97mm personally when I can get away with ~106mm for example. More fps on the same pressure but you don't have to hide with suppressor or tracer if you don't want to. A few mil between the inner and outer barrel. Edited October 12 by Krisz Link to comment Share on other sites More sharing options...
danf1234 Posted October 12 Share Posted October 12 (edited) 1 hour ago, Krisz said: Stock pistols usually come with 97mm or similar length inner barrels. I don't spend money on 97mm personally when I can get away with ~106mm for example. More fps on the same pressure but you don't have to hide with suppressor or tracer if you don't want to. A few mil between the inner and outer barrel. 1 hour ago, Krisz said: Stock pistols usually come with 97mm or similar length inner barrels. I don't spend money on 97mm personally when I can get away with ~106mm for example. More fps on the same pressure but you don't have to hide with suppressor or tracer if you don't want to. A few mil between the inner and outer barrel. 2 minutes ago, danf1234 said: Do you have a link for that Barrel? Edited October 12 by danf1234 Delete Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 12 Share Posted October 12 1 hour ago, danf1234 said: Could someone please tell which is the correct 6.03 laylax barrel for the TM G17 G5. Is it the 97mm 6.03 for the Glock 18c? Standard glock 17 barrel length is 97mm. Link to comment Share on other sites More sharing options...
Krisz Posted October 12 Share Posted October 12 24 minutes ago, danf1234 said: Do you have a link for that Barrel? https://www.outdoorandtactical.co.uk/product/maple-leaf-gbb-aeg-hybrid-106mm-6-02mm-inner-barrel Link to comment Share on other sites More sharing options...
hitmanNo2 Posted October 12 Share Posted October 12 Is there a compatibility list for gen 3, 4 & 5? I gather mags are interchangeable but can you say, swap slides etc? Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 12 Share Posted October 12 4 minutes ago, hitmanNo2 said: Is there a compatibility list for gen 3, 4 & 5? I gather mags are interchangeable but can you say, swap slides etc? G17 Gen 3, 4, 5: Mags inner barrels hop rubbers hop tensioners (ML I-Bar) G17 Gen4, 5: recoil springs hop arm G19 Gen3 and Gen4, G17 Gen5 Hop unit That’s about it. Basically everything else in the Gen5 is different. Even the pins in the hammer mechanism are different. Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 12 Share Posted October 12 9 minutes ago, hitmanNo2 said: Is there a compatibility list for gen 3, 4 & 5? I gather mags are interchangeable but can you say, swap slides etc? Jaeger precision popped a video up a couple of days ago, admitting he is late to the party 😁 Mr Dellski and MistakenMexican 1 1 Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 12 Share Posted October 12 5 minutes ago, Enid_Puceflange said: Jaeger precision popped a video up a couple of days ago, admitting he is late to the party 😁 saw this. i was going to do some videos and how to’s but i struggle for time to film and time to edit. so far is disassembled mine down to springs and screws and reassembled. Daunting at first but it makes sense now. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 18 Share Posted October 18 I’m a happy bunny Mr Dellski, ButcherBill, MistakenMexican and 1 other 4 Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 18 Share Posted October 18 9 hours ago, Enid_Puceflange said: I’m a happy bunny Those sights are tidy 👌🏽 those the same Proarms sights with the new tritium rods in? Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 18 Share Posted October 18 30 minutes ago, MistakenMexican said: Those sights are tidy 👌🏽 those the same Proarms sights with the new tritium rods in? Thanks bud, Yeah, that’s the ProArms ones, but I filled the holes with Ti White Acrylic paint Worked quite well MistakenMexican 1 Link to comment Share on other sites More sharing options...
GiantKiwi Posted October 19 Share Posted October 19 Looks like I won't be getting one despite my intentions - Baton, who rebrand KJW pistols, particularly CO2 models, now 'own' the license for Glock in Japan - which ultimately means Gen 5 MOS will cease to be made. Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 19 Share Posted October 19 1 hour ago, GiantKiwi said: Looks like I won't be getting one despite my intentions - Baton, who rebrand KJW pistols, particularly CO2 models, now 'own' the license for Glock in Japan - which ultimately means Gen 5 MOS will cease to be made. You can still buy them from Airsoft World? we’ll have to see how it goes - Asian airsoft companies are famed for ignoring trademarks and license. I haven’t seen anything in the news about it but maybe I’m not looking hard enough. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now