Jump to content

custom aeg project


masadanator
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

hi guys

what do you think of this

G&P Ready-Mag

 

G&P 8mm Bearing Gearbox

 

G&P Limited Edition Magpul Type Metal Body (Black)

 

Madbull Daniel Defence licensed 16 Inch M4 Outer Barrel

 

Prometheus EG Barrel 407mm for M4A1/ SR16/ SG551+

 

Systema Air Seal Nozzle for M16-A2/M4

 

Systema ENERGY Cylinder Set for M4A1

 

Systema All Helical Gear Full Set High Speed Ratio

 

Systema Selector Plate for M-16 / M4 / SR16 / M733

 

Systema Switch Assembly VER II (REAR STOCK Battery Configuration)

 

Systema Reversal Stop Latch

 

Systema Metal Shim Set

 

Systema Cut Off Lever VER II

 

Systema ENERGY Tappet Plate Ver. 2

 

Prometheus EG Spring Guide w. Smoother Ver. 2&8

 

MADBULL ACE M4 Stock Tube with Quick Detach Base

 

G&P M4 AEG Steel Trigger

 

King Arms 8mm Bearing

 

Madbull 9 inch Daniel Defence Lite Rail Picatinny Handguard (Black)

 

Madbull Delta Ring Modification Kit - PRO Level

 

Magpul PTS MOE Stock (Dark Earth)

 

Magpul PTS MIAD Grip (for M4 / M16) (Full Kit) (DE)

 

Magpul PTS XTM Rail Panels (Black)

 

Magpul PTS XTM Rail Panels (DE)

 

Magpul PTS AFG (Angled Fore-Grip / Dark Earth)

 

Magpul PTS EMAG Magazine (Mid Cap 120 Rds) - Black

G&P Grease Set

 

 

madbull Ultimate Silicone Oil (30ml)

 

 

G&P M120 High Speed Motor GP561

Plus: Daniel Defence barrel nut and wrench, also pmag ranger plate DE 3 pack x2

post-3203-1312666960_thumb.jpg

Link to comment
Share on other sites

  • Supporters

Copycat :P

I thought u wanted a Masada?

 

Anyway, a few things... your buying a gearbox and replacing nearly every part? Why not just custom build a gearbox?

You also need a gas block and tube that's about all you're missing that I can think of ;)

BTW, why not us your ka as a base to upgrade?

Good spec list etc though

 

 

Too much magpul :P

Link to comment
Share on other sites

Copycat :P

I thought u wanted a Masada?

 

Anyway, a few things... your buying a gearbox and replacing nearly every part? Why not just custom build a gearbox?

You also need a gas block and tube that's about all you're missing that I can think of ;)

BTW, why not us your ka as a base to upgrade?

Good spec list etc though

 

 

Too much magpul :P

it says gearbox i meant to put casing

and yea i do want a masada these are parts im building up over time

@M.T.T.A it will be around 800

Link to comment
Share on other sites

I think u missed the spring too :P kinda important....

 

Fair enough u going on Wednesday?

 

oh yea its a prometheus ms100 spring

 

no cant make wednesday have to buy a new lipo charger an imax one £80.00 so may not be going for a while

Link to comment
Share on other sites

Ok, just a thought- might be worth miss out the ready mag if your using hichcaps, theres not much point

 

no i will be use 120rd emag's

Link to comment
Share on other sites

  • Supporters

There are a lot of internal parts that I personally feel would be better off with other things, especially at the price, you want everything working smoothly.

I would get an ASCU V2 for it, trigger response like a PTW from mine and mine's the old one cycling stock marui gears on a CA high-torque motor.

 

Helical gears are super quiet, but are by all accounts a complete b*tch to set up correctly and get working smoothly.

Link to comment
Share on other sites

There are a lot of internal parts that I personally feel would be better off with other things, especially at the price, you want everything working smoothly.

I would get an ASCU V2 for it, trigger response like a PTW from mine and mine's the old one cycling stock marui gears on a CA high-torque motor.

 

Helical gears are super quiet, but are by all accounts a complete b*tch to set up correctly and get working smoothly.

 

how do you fit a ASCU i've been looking at one

Link to comment
Share on other sites

  • Supporters

Not all of the systema upgrades are bad but some of their parts, springs four example are pants. As are the drop in gearbox's.

Just be wary and look around for the best parts before buying :)

 

Just realised, u forgot the hop up, bucking and nub ;)

Link to comment
Share on other sites

Not all of the systema upgrades are bad but some of their parts, springs four example are pants. As are the drop in gearbox's.

Just be wary and look around for the best parts before buying :)

 

Just realised, u forgot the hop up, bucking and nub ;)

 

no i havent you get a g&p hop up unit and bucking with the body

and no cam im not copying you because a im building it completely from scratch and b i cant be copying you as i know you wouldent allow you gun to have all that magpul

Link to comment
Share on other sites

  • Supporters

Dont use the g&p hop up parts, they aren't very good,

Use a madbull ultimate or systema chamber with madbull red/guarder clear/ prommy purple bucking.

Might be worth getting a pdi barrel.

What gas block r u using?

 

What type of gun are u looking for? Standard AR or a DMR?

 

i know you wouldent allow you gun to have all that magpul

 

 

Because he's clever :P

Link to comment
Share on other sites

@marksman556

 

oh ok i was thinking of a systema metal hop with prometheus purple bucking

and im using a vltor lowprofile i dont think its on the list

its gonna be a standard ar because of the rate of fire i will have

plus i dont plan to start it till atleast next year after ive sorted out the masada

Link to comment
Share on other sites

  • Supporters
Not trying to copy my (Not finished) DMR are you?

 

I could say the same thing about you but my plans were deliberatly unpublished so have you been snooping aroun my place?

Link to comment
Share on other sites

Because he's addicted to fagpul :P:lol:

 

ha ha so ture love the stuff

 

Why not ditch the CTR/MOE stock in and have a SOCOM stock? Better looking and eveyone has magpul stocks.

 

http://www.specshop.pl/images/Madbull_ACE_...lar_Stock_1.jpg

 

Also the madbull hop up units are exellant bits of kit.

 

yea one of ma mates has one they do look quite good i might get both

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...