Jump to content

Ares striker AS-01 long range issue


hairyballs
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi,

 

My striker is fully upgraded but it's sending BB's after about 60m to the left, I'm using .48s which is bang on putting rounds into the same target again and again butt the aim off is about 4 to 5 feet.

 

Any help would be great.

Link to comment
Share on other sites

On 09/05/2022 at 20:01, hairyballs said:

fully upgraded

Maybe that's the issue.

 

Care to write down a parts list?

 

Maybe your hop rubber is slightly tilted or the TDC isn't applying proper pressure.

Link to comment
Share on other sites

The upgrades are

Maple leaf MR 70 bucking

Maple leaf Omega nub

Teflon cyinder

AA hop up unit 

Lycan Romeo Sear 

Jaeger Precision Hagane AS01 Trigger - Heat Treated 

AED feed tube

6.01mm 550mm thigh bore barrel

Airsoft Pro Upgrade set for Ares Amoeba Striker with M150 spring. 

Upgrade set for Ares Amoeba Striker spring action rifle. The package contains the basic parts to increase the performance.
 
Hybrid Piston:
 
Fully lightweight aluminum body (lighter than upgrade piston from Ares)
Two polyacetal (POM) rings with lubricating groove for good slip in the cylinder.
Stainless steel piston catch.
Rubber front pad. The impacts of the piston are so quieter and the impact is spread over a larger area.
Back pressure head improove sealing due to six air channels.
Spring guide:
 
Made of stainless steel on CNC machines
Equipped with a ball bearing to reduce spring tension when compressed.
 
Spring:
 
M150 Tempered steel spring Included. 
 
 

 

Link to comment
Share on other sites

So they go straight up to 60m then veer left?

Or does the BB gradually move along its path?

 

 

Edited by Skara
Link to comment
Share on other sites

  • Moderators

It's an easy fix, you just need to rotate your bb's 90° degrees when loading.

Simples🦧

Link to comment
Share on other sites

  • Supporters

If it's not that two diameter cylinder, like the edgi, then there's nowhere near enough air volume for a 0.48g BB and an 550 barrel.

70 hardness rubber is too hard for that weight. The recommended hardnesses are for the measured FPS on the weight you use, not the FPS it would be on 0.20g.

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...