Raytd Posted June 25, 2019 Share Posted June 25, 2019 Need a repair ASAP in Kent anyone know a guy? Please and thanks rather not post off to a website one Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted June 26, 2019 Mostly Retired Moderators Share Posted June 26, 2019 He's about an hour from you, but @rocketdogbert might be able to help? Link to comment Share on other sites More sharing options...
Guest Posted June 26, 2019 Share Posted June 26, 2019 Lol depends what is Link to comment Share on other sites More sharing options...
MikeMarden Posted June 26, 2019 Share Posted June 26, 2019 James Johnathon Minns - Can be found on Facebook, very reputable & does a lot of good tech work based in Kent Hope this helps Link to comment Share on other sites More sharing options...
Raytd Posted June 26, 2019 Author Share Posted June 26, 2019 Thanks everyone @rocketdogbert i have an asg mac10 Ingram it’s barely been used but as a rare backup now the issue is I changed the battery over and when I put the front back on I popped a mag in and put off of safety but discovered the safety is stuck on safe and I can’t get it to switch and I’m scared of taking apart airsoft guns I tried once it didn’t go well lol maybe you can take a look Forgot to mention my friend is wanting to use it on his first skirmish hence I need to get it fixed 😕 6 hours ago, MikeMarden said: James Johnathon Minns - Can be found on Facebook, very reputable & does a lot of good tech work based in Kent Hope this helps Thank you unfortunately I refuse to make a Facebook account XD been there done that won’t go back XD any other means of contact incase @rocketdogbert is unable ps @rocketdogbert where are u based? Link to comment Share on other sites More sharing options...
Guest Posted June 26, 2019 Share Posted June 26, 2019 I’m in SE Essex, not super close. If it needs parts, that might be an issue, especially for timing, it also for cost. Everything is fixable, but there is also a trade off between cost of repair/spec of repair/time to repair. I’d recommend diving in yourself, plenty of top people here who can help, it’s very likely a misaligned or broken selector plate, but equally I’ll happily have a look. Where in Kent are you? Link to comment Share on other sites More sharing options...
Raytd Posted June 26, 2019 Author Share Posted June 26, 2019 Rainham In Kent I suppose self service is the way I have to go perhaps Link to comment Share on other sites More sharing options...
Guest Posted June 26, 2019 Share Posted June 26, 2019 How much are they new? And are parts available? Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted June 26, 2019 Supporters Share Posted June 26, 2019 @rocketdogbert they are awful just steer clear of it. Nasty cheap AEP made by JG and everything about it is awful. Replacement parts are hard to get. Even when the guns were easy to get hold of it was a case of just bin it as they were cheap. To the OP not worth the bother as even when working they are awful. Link to comment Share on other sites More sharing options...
Moderators Tackle Posted June 26, 2019 Moderators Share Posted June 26, 2019 1 hour ago, Raytd said: Thanks everyone @rocketdogbert i have an asg mac10 Ingram it’s barely been used but as a rare backup now the issue is I changed the battery over and when I put the front back on I popped a mag in and put off of safety but discovered the safety is stuck on safe and I can’t get it to switch and I’m scared of taking apart airsoft guns I tried once it didn’t go well lol dude, did you put the locking pin that holds the front on the right way round ?. I had one & had that happen to me, its not a major fault, but rather a finicky part of the design, just fiddle with it & you'll sort it, just don't force nothing. Link to comment Share on other sites More sharing options...
Raytd Posted June 26, 2019 Author Share Posted June 26, 2019 @ImTriggerHappy honestly I disagree it’s performed brilliantly for me till now but if you wanna buy me a decent gun feel free I’ll bin it no problems but when your unimployed and disabled y’all don’t get to pick and choose 1 minute ago, Tackle said: dude, did you put the locking pin that holds the front on the right way round ?. I had one & had that happen to me, its not a major fault, but rather a finicky part of the design, just fiddle with it & you'll sort it, just don't force nothing. @Tackle huh yeah I had that issue b4 thinking about it I’ve tried to play w the pin but it feels a tad loose maybe that’s the issue 😕 I can replace the pin for like 5 quid so worth a try then Ehh i can’t remember where I saw the spare parts tho lol Link to comment Share on other sites More sharing options...
Moderators Tackle Posted June 26, 2019 Moderators Share Posted June 26, 2019 the pin has a number of cut-outs on it, if any aren't aligned, that could be enough to cause the issue. Link to comment Share on other sites More sharing options...
Raytd Posted June 26, 2019 Author Share Posted June 26, 2019 9 minutes ago, Tackle said: the pin has a number of cut-outs on it, if any aren't aligned, that could be enough to cause the issue. Hmm I wish I could just replace with a better gun but I’m currently short about 100 bucks from replacing it w anything good atm I’ll fiddle more w it see if I can make it slot in Link to comment Share on other sites More sharing options...
Raytd Posted June 26, 2019 Author Share Posted June 26, 2019 Hoping to get a cyma p90 that has been upgraded but I have to wait until I can afford to get it 😭 never thought I’d say this but I miss work XD having a paycheck used to be awesome haha 1 hour ago, rocketdogbert said: How much are they new? And are parts available? They were 89 new and yes there were some parts available when I watched Looked * Link to comment Share on other sites More sharing options...
Guest Posted June 26, 2019 Share Posted June 26, 2019 6 minutes ago, Raytd said: They were 89 new and yes there were some parts available when I watched Looked * Not worth repairing unless you do it yourself and parts are less than £20 all in matey Link to comment Share on other sites More sharing options...
Raytd Posted June 26, 2019 Author Share Posted June 26, 2019 Where did you find the parts someone showed me a website that sold them before but I can’t find it Link to comment Share on other sites More sharing options...
Raytd Posted June 26, 2019 Author Share Posted June 26, 2019 As y’all can tell I’m no expert I used to think src was a good make and bbguns4less was the best place to buy airsoft stuff lol i now know better ish Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted June 27, 2019 Supporters Share Posted June 27, 2019 12 hours ago, Raytd said: @ImTriggerHappy honestly I disagree it’s performed brilliantly for me till now but if you wanna buy me a decent gun feel free I’ll bin it no problems but when your unimployed and disabled y’all don’t get to pick and choose Disagree all you like but it is still a crap gun. If money is that tight save it towards a better gun rather than spend it trying to fix a bad one. Cost of parts, labour and postage is more than it is worth. Link to comment Share on other sites More sharing options...
Raytd Posted June 27, 2019 Author Share Posted June 27, 2019 I managed to get it working I had an upgraded motor a while ago on it the bastard glued the top part to the bottom so I couldn’t disassemble myself but when it broke free of glue I managed to take apart they have a latch that stops it from changing safety if disassembled ana the front plate broke a bit and wasn’t pushing that lever down so I got some bluetack and stuck the latch to a bit of plastic it’s now able to change safety whenever but no locking if disassembled i had I think was a cyma aep motor about a year ago shoots solid 320fps stock gun was 260 but thanks all for reply’s @ImTriggerHappy me and my m8 are going half on a cyma fully upgraded p90 we know the guy he got it did it up then got himself a gas sniper and never used the p90 he is selling it for 150 so I think I’ll be going for that what do u think ? Fully upgraded parts can’t remember what they were but I had someone check the upgraded bits out and they are better stuff for sure it has the front rail and a nice holographic sight 7 hours ago, ImTriggerHappy said: Disagree all you like but it is still a crap gun. If money is that tight save it towards a better gun rather than spend it trying to fix a bad one. Cost of parts, labour and postage is more than it is worth. Yeah saving for new one doesn’t go down well with my partner I have to tip toe round subject of money I’m going halves on one w my m8 sneaky sneak Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.