GothicGhost Posted June 6, 2016 Share Posted June 6, 2016 Been looking at a few in my price range I think it would be the G&G GC16 wild hog metal version. https://www.red1airsoft.co.uk/airsoft_weapons/assault_rifles/m4-m16-airsoft-rifles/G_and_G_GC16_Wild_Hog_12_Keymod?sort=p.price&order=ASC&limit=100 I read about the metal version being bit better internals then the plastic one. Ics looks nice like the ics cxp-hog or cpx-uk1. http://www.icsbb.com/product-category/electric-gun/electric-gun-cxp/electric-gun-cxp-cxp-hog/ http://www.icsbb.com/product-category/electric-gun/electric-gun-cxp/electric-gun-cxp-cxp-uk1/ I am not sure if parts are hard to get with ICS aegs? I don't mind other brands I just don't really know what is good right now. £300 just for the gun itself I will add extras later. Thanks for any advice. Link to comment Share on other sites More sharing options...
Supporters Monty Posted June 6, 2016 Supporters Share Posted June 6, 2016 Krytac.. Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted June 6, 2016 Supporters Share Posted June 6, 2016 G&G are ok if spending up to £200 absolute max - well really £160 max on their starters The new ETU models can be picky If you spend too much on a G&G then imho that could be unwise ICS are supported brilliantly by FireSupport and most stuff is compatible in there - mainly hop/bucking the other stuff uses normal aeg stuff Krytac - end of - we keep saying coz if you want a recommended gun to get - well uhm ergh Krytac then it is that simple - you see where the extra bit of dosh went - stuff inside is VERY GOOD (I'll admit not 101% perfect but as a fussy bastid - it comes closer than most out there) Link to comment Share on other sites More sharing options...
GothicGhost Posted June 6, 2016 Author Share Posted June 6, 2016 I was looking at the Krytac trident but was not sure if it's worth the extra and I was reading about version 2 coming out? http://www.patrolbase.co.uk/airsoft-m4-m15-m16-variants/krytac-trident-spr-dark-earth.htm#.V1WzOb7G-Uk Thanks. Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted June 6, 2016 Supporters Share Posted June 6, 2016 if you wanna wait for the next batch for a particular model/colour then fine tbh the mk2's were gonna have a few revisions like forward assist/AR spring release but that feature got scrapped but also a slightly cheaper version is planned basically my gut feeling is a few revisions in new range then the old tried tested stuff gets a price drop and launched in the Alpha range: http://www.evike.com/products/63113/ don't get ya hopes on $275 - wow maybe £200 time you factor vat & retailers mark up but might see that get knocked out at about £250 comparing current models price in $ to £ might even get a little lower but think £250 or same price as titchy bastid one that goes for about £250-£260 over here (they making a titchy budget version of that too so that could be well under £250 - FireHawk owners beware) Link to comment Share on other sites More sharing options...
NathyB Posted June 7, 2016 Share Posted June 7, 2016 I wanted a Krytac CRB but there's not stock any where any one know of any ? Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted June 7, 2016 Supporters Share Posted June 7, 2016 I wanted a Krytac CRB but there's not stock any where any one know of any ? And 5 secs later: http://www.surplusstore.co.uk/krytac-trident-crb.html or http://www.surplusstore.co.uk/krytac-trident-crb-wolf-grey.html Link to comment Share on other sites More sharing options...
NathyB Posted June 7, 2016 Share Posted June 7, 2016 Cheers dude was going to get a G&G gc16 warthog metal because I thought no where had them getting my ukcara Sunday just hope they stay in stock Link to comment Share on other sites More sharing options...
Brauster Posted June 7, 2016 Share Posted June 7, 2016 Are the Krytec metal body or polymer? Link to comment Share on other sites More sharing options...
Sacarathe Posted June 7, 2016 Share Posted June 7, 2016 Are the Krytec metal body or polymer? Yes. Link to comment Share on other sites More sharing options...
Brauster Posted June 8, 2016 Share Posted June 8, 2016 Brauster, on 07 Jun 2016 - 6:47 PM, said: Are the Krytec metal body or polymer? Yes. Ok so which one or do you mean they come in both options Link to comment Share on other sites More sharing options...
Skyblade Posted June 8, 2016 Share Posted June 8, 2016 They are metal apart from the stock and the flash hinder,got mine couple of weeks ago,I got the SPR,used it Sunday,you will jot be disappointed Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted June 8, 2016 Supporters Share Posted June 8, 2016 That is like when you ask a somebody the question: Tea or coffee ??? and they answer - Yes please but I am not raising my hand to this - only coz I'm confused as to which is left or right damn it nailed it: just raise both Link to comment Share on other sites More sharing options...
Sacarathe Posted June 8, 2016 Share Posted June 8, 2016 That is like when you ask a somebody the question: Tea or coffee ??? and they answer - Yes please but I am not raising my hand to this - only coz I'm confused as to which is left or right damn it nailed it: just raise both Well, I did provide a link, which after a quick spelling error correction from google provides the answer with almost every link on the page. Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted June 8, 2016 Supporters Share Posted June 8, 2016 I'm not saying anything.... I can look very deep in thought sometimes (others say grumpy) Then I open my mouth and realise brain is not in gear or even connected sometimes Link to comment Share on other sites More sharing options...
Moderators djben9 Posted June 11, 2016 Moderators Share Posted June 11, 2016 so the G&G still your preferred choice??.....I went for the UK1 back in October, never let me down since , also now have the ICS M4 EBB and again perfect for me so alternate use in games.....may look nto this Krytac revolution one day but not in a rush Link to comment Share on other sites More sharing options...
Trojan Posted June 11, 2016 Share Posted June 11, 2016 Well, I did provide a link, which after a quick spelling error correction from google provides the answer with almost every link on the page. You're an odd person, aren't you? Link to comment Share on other sites More sharing options...
GothicGhost Posted June 11, 2016 Author Share Posted June 11, 2016 I was looking on ICS website and the uk1 looks very nice. http://www.icsbb.com/product/ics-265-cxp-uk1-r/ I think that is the rear wired one. Link to comment Share on other sites More sharing options...
Sacarathe Posted June 12, 2016 Share Posted June 12, 2016 You're an odd person, aren't you? Please explain. LMGTFY is a perfectly legitimate educational tool. Link to comment Share on other sites More sharing options...
Moderators djben9 Posted June 12, 2016 Moderators Share Posted June 12, 2016 yeah rear wired, ICS-265, thats the 'long version', ICS-264 is the 'shorter' version, which I have . When I got mine, FS had loads of front wired ones in as I believe ICS then updated to rear wire not long after, hence some good deals on the Tan ones earlier in the year Link to comment Share on other sites More sharing options...
Trojan Posted June 12, 2016 Share Posted June 12, 2016 Please explain. LMGTFY is a perfectly legitimate educational tool. Is the Krytac body metal or polymer? 'Yes'. That's called being pedantic and arrogant for no reason. Link to comment Share on other sites More sharing options...
Sacarathe Posted June 12, 2016 Share Posted June 12, 2016 Is the Krytac body metal or polymer? 'Yes'. That's called being pedantic and arrogant for no reason. I don't think that's either of those sir, and I don't think preventing someone wasting people's time is no reason. If you ask a question on a forum which can be answered verbatim by google, you deserve to get LMGTFY'd. I answered yes because it was a teachable moment, and I did not want to spend time deconstructing the question as that could be insulting. The person who asked the question, did not even click the link - that's potentially insulting. I've been on the receiving end of LMGTFY many times, and eventually you take away positive things from it when people link it to you. Link to comment Share on other sites More sharing options...
Trojan Posted June 12, 2016 Share Posted June 12, 2016 I don't think that's either of those sir, and I don't think preventing someone wasting people's time is no reason. If you ask a question on a forum which can be answered verbatim by google, you deserve to get LMGTFY'd. I answered yes because it was a teachable moment, and I did not want to spend time deconstructing the question as that could be insulting. The person who asked the question, did not even click the link - that's potentially insulting. I've been on the receiving end of LMGTFY many times, and eventually you take away positive things from it when people link it to you. That's a nice verbose statement. His question could have simply been answered with one word, "metal". You chose otherwise. Nobody is wasting anybodys time. You choose to help on forums because you either want to contribute to society or you enjoy it. If you find a particular question to be time-wasting then you do not answer it. Link to comment Share on other sites More sharing options...
Sacarathe Posted June 12, 2016 Share Posted June 12, 2016 That's a nice verbose statement. His question could have simply been answered with one word, "metal". You chose otherwise. Nobody is wasting anybodys time. You choose to help on forums because you either want to contribute to society or you enjoy it. If you find a particular question to be time-wasting then you do not answer it. The faster those questions are resolved the less time is wasted; need a non insulting way to educate people to avoid more of those questions? Use LMGTFY. Think about it, if 20 people ignore an easy question, that's 19 people's time wasted. I love how you're finding a way to slip an insult into every post, carry on. Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted June 12, 2016 Supporters Share Posted June 12, 2016 FFS - both calm the f*ck down it was an easy oversight in answering a question just like the classic tea or coffee question I posted easily done - nobody should be judging anybody or trying to be smart or $hit like that I don't really give a f*ck - just remember it takes TWO to make an arguement so ffs chill out a bit..... I could go on and nitpick loads here but I know for a fact I'm far from perfect and often have made myself to look an even bigger pratt than I already am if you can't let it go then I'm gonna tell a teacher - aka mod and thread gets locked which we should not really have to do on here and I don't care either who started it - mellow out a bit - jeeeeezzzzzzzzzz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.