og123 Posted April 11, 2016 Posted April 11, 2016 Hello, I have a umarex hk ump 45. I was wandering if anyone knows how I can improve the trigger response other than using a new battery because my gun can only fit up to an 8.4. How can I improve trigger response ? Thanks!
Supporters jcheeseright Posted April 11, 2016 Supporters Posted April 11, 2016 hardwired MOSFET, Gate Nano is a good option. 7.4v LiPo will give you a bit of a boost over your current 8.4v NiMh.
Supporters Sitting Duck Posted April 11, 2016 Supporters Posted April 11, 2016 Unsure of motor type used SIG uses medium motor Otherwise I'd say use a SHS speed motor or fast neodym motor Really the whole lot should be done But cheap option is fit deans if ya budget is really tight like a camel's ar$e in a sandstorm
GunmanAirsoft Posted April 12, 2016 Posted April 12, 2016 Cheapest option is a lipo. Next is a MOSFET as well. After that you're getting into gearbox and motor stuff
og123 Posted April 12, 2016 Author Posted April 12, 2016 Cheapest option is a lipo. Next is a MOSFET as well. After that you're getting into gearbox and motor stuff Yes I want to get a lipo but the ump can only take the stick/tubular batteries
callumbagshaw Posted April 12, 2016 Posted April 12, 2016 Consider changing the wiring from Tamiya to Deans too. Apparently you get a better arc, and a faster response as it's gold plating set on brass... but I'm no expert.
Supporters Samurai Posted April 12, 2016 Supporters Posted April 12, 2016 Yes I want to get a lipo but the ump can only take the stick/tubular batteries Like this? http://www.hobbyking.com/hobbyking/store/__84545__Turnigy_nano_tech_1300mAh_2S_25_50C_Lipo_AIRSOFT_Pack_T_connector_UK_Warehouse_.html
GunmanAirsoft Posted April 14, 2016 Posted April 14, 2016 Yes I want to get a lipo but the ump can only take the stick/tubular batteries That's fine, there's loads of lipos which will fit
Recommended Posts
Archived
This topic is now archived and is closed to further replies.