LazzurusMan

Gbb. I've sprayed up the pistol grip, didn't use primer as it just peeled off, the black went on lovely, just waiting for the matt coat to dry then I'll be slapping it back on the noveske. It's only to make it look how I want for a game this Sunday.

I know it will chip, this is just a stop gap until the moe k2+ comes back in stock in black where I can get it without paying international shipping and tax.

I've got some grey plastic primer from halfords, worked fine on motorcycle fairings and has never let me down on models either. Also got white, so plenty of options. Is it worth apply a matt coat afterwards to try and preserve the paint job?

So, I'll start this by saying I'm no newcomer to spraying and airbrushing (airsoft isn't my only expensive hobby), but I do just want to pick a few brains for some quick advice before I break out the rattle can. I want to spray up my pistol grip cause the magpul moe k2 is out of stock in black almost everywhere and my rifle would look so much better with a black pistol grip. I won't be sanding it as it has a nice texture to it that I don't want to ruin, so the paint might not adhere great. Is it worth giving it a matt coat, or will it still wear off regardless? Same with undercoating it first, is it really worth it if the paint won't last long regardless?

Ended up getting an angrygun bolt with mpa for now. Seems pretty consistent so far, and it's way lighter than the stock bolt. Just LOTS of tiny adjustments to get to 1.13j on .32 with red gas.

Me again, with yet another stupid question for you gbbr veterans. When putting a bucking on a gbbr barrel, do I need to use the little metal ring that came with the bucking? Put a maple leaf autobot 60, laylax hop arm and laylax barrel into a friend's tm mws and he's getting about 20 meters with full hop, and the bbs almost fall out of the barrel with no hop applied. That metal ring that comes with the bucking is the only thing I can think of that might be causing issues, and I don't have a long enough garden to change it and test it myself.

Cheers guys. I'll pick some up next time I'm b&q direction.

Ok, cheers everyone. Ive got some silicone oil that I use on my pistol, ill probably go with that for now. By 3 in 1, do you mean like wd40 type stuff? Ive got my daughter this weekend so my brain is currently fried from being repeatedly asked "why" and "whats that".

Saw in the mws thread they were suggesting chain lube for the metal moving parts. Would the muck off all weather lube be OK? I already have some so it saves me a trip to halfords and a little extra money.

Dk armaments. Looked like they had a few in both black and tan if you're after one.

So today I'm picking up an evo bolt and ra-tech npas for my noveske. I've searched online and YouTube, but I cannot find a decent video of how to properly fit an npas. Half the videos have all the bits I need to know being done under/out of the cameras view, the other half are from East Asia and unfortunately I can only speak the one language and they don't have subtitles. Can anyone give me a breakdown or link me a tutorial on how to fit an npas correctly? If I can't figure it out in a few hours I'll have to get the angrygun bolt (comes with npas pre fitted) and I'd rather avoid angrygun.

Picked mine up last weekend. Feels and looks great, not very efficient on gas (only running green gas so might have been to cold) and I'm pretty sure I got one of the newer gens with the new black, noveske branded bolt. Barely hops .3s, so tomorrow I'm sticking in a longer barrel, autobot bucking, omega nub, evo lightweight bolt and ra-tech npas.

Hang on, just watched the video again. Every other video I've seen of the n4 shows it with a silver bolt, that video shows a black one with noveske logo. The black bolt is what I have in my n4 I bought last weekend. If I'm right and I have the "newer" version.......efficiency isn't great from what I've experienced. It'll do a whole mag on semi but definitely felt like it was getting sluggish, but won't do a mag on auto.

I want the feda, but it's out of stock and firesupport have the ra tech in, and I'm going there tomorrow.

I see your point. I have about 24hr to make up my mind about which I'm gonna go with, and whether I want to go with a 250mm laylax barrel, or a slightly longer crazy jet (they don't have a 250 jet barrel in)

I have seen earlier in this thread people have had issues with the angry gun bolts not cycling or locking back properly. And I've seen they apparently have qc issues. I'll probably go with the evo bolt and gm npas. It's cheaper too.

Figured there's no better place to ask than here, but for an mws (or clone) which would everyone rate better. Angrygun lightweight bolt with gen2 mpa Or Evo lightweight bolt with an Ra tech npas?

Around the same price? Everywhere I've looked the gm mags are 85 and the de mags are 65. That 20 quid soon adds up when you're looking at running 6 of them.

Quick question, is there any advantage in a gbbr going for a silicone bucking?

No, they use the email function to hide their usernames, however it does still give you their email, which admins might be able to work with.

Hope an admin sees this. Whoever this is tried to sell me a sig556, used a photo from Google images. Thought I'd let the admins know there's another scammer about.

They're not inserts I have atm, they're prescription lenses for a different set of bolle safety glasses I got from boots opticians. I'll go for the raiders and see if my lenses fit. My prescription isn't majorly important, but I do see slightly better with it, so I can still airsoft even if they don't fit.

Afternoon all, My bolle prescription glasses have fallen apart, so I need to order myself some new eye pro before I cxan airsoft again on th 9th of march. Ive been looking at the bolle raider kkit as it doesn't seem too expensive amd has the bit to hold pescription inserts. I just need to know from anyone that has these glasses if I need to egt new pescription lenses from bolle specifically for the inserts, or will the lenses from my now useless bolle eye pro fit?