sp00n

556 sight 1" raiser for the sight Fore grip Sometimes a torch

ok so not bought ... but i have 3D printed some LRB spacers for my TM VSR G-spec

i could understand if they was a bio bb, but there not sold as a bio bb besides no where makes a bio bb this heavy

just noticed something abit off on ASPUK's ammo, looking at the pic is says:- "store in a dry, air tight container. use within 2months of opening" eh? why what happens after 2 months ... they go bad? seriously lol

yes they both are

Doh, sorry i forgot to add that lol they are both sold as 1000rd, but the reaper is approx 1inch longer, so i suspect the alyan is only a 800rds

Here is my review on the Alyan Arisoft and Reaper Airsoft GBBR m4 hi-cap mags. For the purpose of this review i am using my bog standard (no npas) WE SCAR rifle. why HPA mags?, i really don't like real caps, gas can get expensive, gas mags are not cheap, winter, and i already have HPA gear. (both mags are sold as 1000rd mags, but the Alyan is 1inch shorter so i suspect its only a 800rd mag) Alyan Airsoft mag This was the first out of the 2 mags i bought. from the outside this mag looks really nice, however its not very good at all. My first problem was i could not get bb's to feed, they kept getting stuck in the alloy top part, i found there was a small tube inside the head, 5mins with some emery paper soon sorted that, then on to testing. I could not get the FPS above 265fps (0.25's) and the FPS would vary wildly from shot to shot, i went as far as getting a palmers regulator and taking the air pressure up to 180PSI, with out joy. at this point i decided to open up the mag and see what was what. Just behind the fitting that screws into the alloy block, was clogged with PTFE tape, and this lead to another discovery ... the valve that Alyan use's is ... well rubbish. It is not one that's designed for gas, its backwards (literally), and you are relying on the spring that goes to the brass striker on the back to keep it closed! (unlike most valves that the gas pressure aids in keeping the valve closed, this one the gas fights against the spring). No matter what i did, i cannot get this mag to work. Its pants don't, buy one you will waste 120 Euro's Reaper Airsoft After being burned by Alyan, i noticed that a lot of people who ran GBBR's, used standard WE mags but with the russian HPA tap. This is where Reaper Airsoft comes In! They don't try to reinvent the wheel (valve arrangement) they do it right, basically they use the top end of a standard WE GBBR mag mated to the hi cap mag, and it works brilliantly, proper British engineering!. with approx 65PSI i was getting 300FPS (0.25's). They where brilliant when i was asking about the mag, and sent me loads of pics that i asked for. Now don't get me wrong, it is £140, but it works! and for me its worth every penny. also major plus points go to this mag, as should the gas valve fail, being standard WE item, its easily replaced Conclusion :- Alyan Airsoft= useless waste of time and money if they was on fire and i had a glass of water .. i would suddenly be very hydrated Reaper Airsoft = extremely well made mag, that dose exactly what it is supposed to do i would buy from them again.

Arrr good point, thought they would be relatively cheap mind. Have you tried the owners group on Facebook?

Apparently real steel exterior parts fit, if you believe e&l's video's etc

Pretty sure ASPUK are going to be selling there own brand of bbs soon

i have no idea did you set your address to UK or UNITED KINGDOM?? oooh got another email from hobby king this morning OMG OMG OMG Edit 06/11/15 :- OMFG it shipped today

Dunno it's been 24hrs and no email yet fingers crossed lol edit :- from hobbykings webby "you order has been printed and is being packed"

Last night l ordered a WE Apache mp5 SD3 from hobbyking £185.61 with shipping OMFG!!! (What's the bets that they cancel the order, I have had a confirmation email mind)

i only paid £15.99 per mag

dunno if i should feel sorry for pro airsoft supplies or not, i ordered and have just recieved 2 G&G SR25 50rd mags, and paid £15.99 each off there website there website still lists them as £15.99 each ....... screw it i dont feel bad, but i am gunna have to order atleast another 2 lol edit :- ordered 2 more and there out of stock

your out of luck with the c-clip atm, there both out of stock. as for the o-ring neither lists them, so i am guessing either they don't wear (unlikely) or they are the same as .... errr i don't know to be honest , try sending aspuk a message on there face book

thanks mate

what parts are you after? i mainly use ASPUK and airsoftpro

as per title, has anyone used http://www.jtac-custom.co.uk/ ?? thanks in advance

have you considered the Action Army hopup chamber? i have one in my vsr, the only down side to them is unless you have done a TDC mod, its a pain to adjust the hop mid game. but if i am honest i dont tend to adjust my hop at all once i have it set.

ATM all stock settings, gunna be trying different barrels and hop rubbers now

Bet they don't get any universal pistol holster in multi cam, in stock before the offer ends >.<

yeah the rear of the "piston" (sorry cannot think of a better word to describe it) is different. that said i did use my original 45degree trigger, with a 90degree mancraft kit, for a weekend or 2, until i got the brass tube shortened, i suffered no ill effects or lockups etc, but i would not advise it ... just incase. i am now using my 90degree trigger.

I have the 90degree trigger, I had to turn (cut) down the brass tube to get the air pipe to fit, as space is tight with this trigger. It's your call though, you will save money with the stock trigger, and wouldn't have to cut the trigger guard down etc