GiantKiwi

Finally managed a reasonably good photo of this that isn't completely blurry Edit: even if it's monster dimensions :/

Yeah, a paltry sum of £741.95 o.o

Should be excellent, as its just a GHK G5 in a TAR chassis.

Clone CTR Stock (black) Clone AFG (black) ACM Surefire M300 ACM Dual function rail mount tape switch 3x Jefftron V2 mosfet 1x Lonex Titan A2 motor 1x Lonex M4 hop chamber & hop bucking 6x VP 1300mAh 11.1v LiPo's (deans)

8x KJW KC-02 CO2 Mags 250 CO2 Capsules Should keep me going for a few months

Baofeng's are Kenwood dual pin for PTT's.

I still don't understand this fascination

Have to question what the point of the MOSFET in them is (outside of the obvious) if it can't do cycle completion but hey ho...

You would be looking at about £360 without the Modelworks stock, and £460 with it. (excluding p&p)

but but magpul x22

£160 better spent on a G&G Combat Machine, it will last longer.

Good luck with that. Airsoft was only legalised in the Netherlands a few years ago, and to take RIF's over you have to apply for an exemption for them with the Dutch Airsoft Sports Club (NABV) months in advance (I was told 3 months was usually minimum acceptable by a cousin who plays over there and holds NABV Membership).

As it explicitly says airsoft guns, its pretty well clear cut that its going to affect us.

They are all clones regardless, which is why those convoluted semantics make no sense whatsoever.

Going secret isn't to hide the group, its just to gain greater control over who is entering the group as people have to be invited to join, or at least that's my reasoning.

That makes no sense whatsoever..

Except when 2 other skan chrono's professionally calibrated 2 days before going to one of their events disagreed with their's, as I had once. Even had them, and their calibration certificates with me and they still reckon my 2 were wrong with readings of sub 1J and theirs claiming 4 guns were 1.4J..

Yes, to change the front sight post you've got to replace the entire outer barrel.

Bank of M&D?

Other alternatives: Maddog Airsoft in Brampton, Cambridgeshire - Big, long and open site, has a bit of a scrapyard feel to it. Commando Elite in Monkswood, Abbots Ripton, Cambridgeshire - Forest, and they have armoured vehicles which are used occasionally - originally only a Paintball site, have recently branched into airsoft as well. Urban Assault in RAF Upwood nr Ramsey, Cambridgeshire - Big urban site, has fallen a little into disrepair as of late. RIFT at Cottenham

G&G Wildhog 7" G&P T1 with High Mount Element PEQ-15A PTS Fortis SHIFT Short Angled Keymod Foregrip PTS Unity Tactical Fusion Mounting System Solarforce L2 with 550 Lumen CREE Single Mode LED Internal changes are Lonex Metal Hop Unit, Lonex Bucking, and soon will also be Lonex Titan A2 motor.

Which is why i've got a Lonex A2 on it's way to me in the post, borrowed one from another AEG to test, and the difference was astounding.

I am straight out calling bullshit on that one from G&G, i've been using an ETU model for a few months on 7.4v LiPo's with no problems with the ETU.

Incidentally, http://www.componentshop.co.uk/7-4v-1300mah-25c-continuous-discharge-cranestock-lipo-battery.html are about the only ones which fit at all in that stock. 11.1v version is a no go as the mosfet is in the stock tube.

At one point, Nuprol's were all that were allowed to be used at a local site, and that was when I had them shatter on my skin... So yeah, pretty sure it was nuprol's, and the amount of air pockets is fairly meaningless as it wasn't a case of lack of external structural integrity, but instead flawed external coating that meant they were soft enough to be impacted just by squeezing them between fingertips.