Anonymoose

I bought a TM recoil 417 and am currently waiting on the mortgage for its upgrades to be approved.

I think that is the case, but they may well be fitted in with sealant too.

This is GBB so it's the mags that make the whole lot heavy. The gun itself isn't bad at all. Not fond of the FN/SCAR UGL, its design doesn't match the SCAR to me. I'm mostly happy with this now, except maybe needing slightly taller scope rings.

I'll have a look into it. The block itself is probably pretty basic and the regulator will come out. Looks like there's a channel drilled inside that's blocked off with a plug on the left. Adapters are probably fairly simple too. The pin's probably pressed or bonded in. Making adapters for ½" UNF is probably as easy as any other.

If taking an AEG from a 275mm barrel to ~210mm will i need to change the cylinder size due to the ratio or will it still work ok? Also how badly will it affect the range by losing 65mm of barrel length?

If anyone can post some detailed pics of the block the capsules screw into i can tell you if it's something i can make with different threads to suit different capsules.

The pitch is wrong. 18 TPI is roughly 1.4mm vs the M16's 1.5mm.

I've used them a bunch of times and had no issues at all.

Don't know about the G36s, but my VFC MP5s didn't come with an NPAS. ☹️ Is it because they have the lugs to join them and the sides aren't flat? I cut all the lugs off my 55s mags and they're still a pain to get into most pouches.

I think no matter what you use to coat the artwork it'll wear off. Don't know how quickly, but it'll wear. For example, this gun's probably done 6-7 games and there's already anodizing wearing off the handguard.

So you want the design to go on a gun you're going to use or as a wall hanger?

The VFC SCAR-Hs have a nice hard kick too, and come with factory NPAS.

SCAR 😏

Got a pic of what you're after? G3s usually had an HK-style birdcage. If you mean a long 4-prong type that sounds like a G36 flash hider.

Where's your sense of adventure? Excellent, our first volunteer! Nine more to go..

Oooh i see. Do they need a special launcher or any 40mm one?

What exactly are they? They look like huge riot control rubber bullets.

I think it was fully upgraded.

Huh.. that's not the advert i posted. In fact, i didn't even see that. I posted a Marui SCAR for 1,200. 🤔

😐

I'll have a look at mine later and see if i had to do anything to it.

As Kiwi said, the Acetech Blaster M. I've tried to buy one before and they're out of stock everywhere except Evike US and some place in Italy. I'll see what others fit when it arrives.

I think the front pin was a little tight, but otherwise it went straight on.

After trying to make my own from scratch, with limited success, i gave in and bought the AngryGun KAC silencer with flash/tracer inside. I'll still salvage my attempt and use it on something.