gunbod007

So I noticed the nozzle on my Marui bolt had some rotation to it. Gave it a bit of a nudge and felt like this was a lot of play Is this normal or could this cause a problem for the seal with the magazine. So far most of the things I have worried about on this forum have actually not been a big deal and I hope this isn't either, but just checking as I can't find a video that clearly shows how much play there could be.

Does anyone know the difference between these two parts. Both NPAS for Tokyo Marui MWS RAG-Marui-060 http://en.ratech.com.tw/english/index.php?option=com_content&view=article&id=1645:rag-marui-60&catid=43&Itemid=157 RAG-MArui-010 http://en.ratech.com.tw/english/index.php?option=com_content&view=article&id=290:rag-marui-010&catid=43&Itemid=157 I am shooting a sub 350FPS auto on abbey predator ultra. maybe higher gas in extreme weather.

Okay thanks, I know there is a doc with recommend npas but out of interest which one are you using? What was putting me off, was hearing that they can actually be quite inconsistent Also are your BCG and nozzle spring stock or upgraded to handle the gas?

fair enough, trying to avoid messing with an npas if possible. I think the Abbey ultra should be fine.

DO you know the difference between the K2 and the PTS EPG? I couldn't find any K2 in stock so went with the EPG they seem similar

I was honestly going to get the new SSP-18 because who doesn't want a full auto pistol but now I think it would make me look like an asshole with the Novristch logo on haha

And can I ask what sort of FPS you get with the Nuprol or Ultra without any npas or regulator for it?

Abbey or Nuprol Is this chart remotely right? Abbey 144a = Nuprol 1 Abbey Ultra = Nuprol 2 Abbey Vertex = Nuprol 3,4 I feel like maybe the abbey is slightly weaker than the nuprol but I have been scratching my head as everyone has a different favourite gas. Anyone with actual experience with these two? I am thinking to go Ultra by abbey or Nuprol 2 for everyday unless very hot or very cold P.S thanks to anyone putting up with an MWS noob and all my noonish comments. I have been trying to scroll through the 160 pages and It is really useful! best forum th

Bada bing has a video where he disassembles his ags and he says he doesn't think you will get one on. But that isn't 100% as he didn't actually try it.

Now that I would love to try

Yeah I used to play years a go and have just had the urge to get back into it during lockdown. Used to run AEG but going all out GBB this time

The O ring off the magazine or speed loader?

Thanks, will make a note. But as per the OP are the recoil springs sensitive. Seems pretty beefy so I am assuming I probably didn't cause any damage.

Thanks all I went with the TM M4 style

It's ground floor into my garden with 6 feet fences but I appreciate the heads up. It is a TM Sorry for not including the model. It is a TM MWS I appreciate it, but it is from my ground floor, into my garden with a 6 feet fence and I informed neighbours just incase. I am somewhat of a hypochondriac with this things but thank you TM MWS sorry for that, Abbey 144a. As recommended by TM but Zero one recently were surprised and said use a stronger gas. So I have Abbey Predator Ultra gas coming soon. Think that should be similar to green gas

I tried this with my fingers and it wasn't having any of it. Which is strange because usually no problem.

Buffer spring accident. So I reassembled the gun and forgot to put the BCG back in. The buffer shot forwards into the upper and that made for a fun 30 mins wiggling it out. Had to use some small tools, applying pressure, trying to PUSH the buffer back into the tube, PULL it forward into the receiver and even a little bit of twisting. Doesn't visibly look damaged but obviously a very important component. How likely are these to get damaged easily in this situation? Note for my earlier Full auto problems I did this mistake after those problems occurred.

Noob problem alert. Ok so I have a gun thats a day old and having issues dumping a mag on 144a. First video is day one. it functioned fine with an expected slight slow down at the end on the weaker gas. Second video is the best I have been able to get out of it all day. Most of they day it has been failing to cycle a whole shot. Missfiring, not having enough power to lock back and barely getting through a 3 round burst. The second video is not terrible but is obviously much slower rate of fire and more sluggish than the first. Filmed 1 day apart with blaster .25 on 144a and a room temp magazine. Am I just being a noob here? Not filling the mag correctly, not enough, maybe over filling. I really don't know. Going to try on Green Gas when it arrives and if problems persist will make an update. But I am considering sending it back already! Didn't wanna be "that guy" I also am a bit of a hypochondriac so problems with a new gun certainly worry me MAKE: TM MWS IMG_0850.mov IMG_0858.mov

Noob problem alert. Ok so I have a gun thats a day old and having issues dumping a mag on 144a. First video is day one. it functioned fine with an expected slight slow down at the end on the weaker gas. Second video is the best I have been able to get out of it all day. Most of they day it has been failing to cycle a whole shot. Missfiring, not having enough power to lock back and barely getting through a 3 round burst. The second video is not terrible but is obviously much slower rate of fire and more sluggish than the first. Filmed 1 day apart with blaster .25 on 144a and a room temp magazine. Am I just being a noob here? Not filling the mag correctly, not enough, maybe over filling. I really don't know. Going to try on Green Gas when it arrives and if problems persist will make an update. But I am considering sending it back already! Didn't wanna be "that guy" I also am a bit of a hypochondriac so problems with a new gun certainly worry me IMG_0850.mov IMG_0858.mov IMG_0858.mov

Mag dump problem, Hey all, new to GBB. Using 144a weak I know but should still be able to handle at least 1 mag dump. When I got the gun, brand new, I was able to pull off a full auto mag dump in cold weather on about 8/10 seconds fill no green gas mod. That was yesterday. Ever since, every time I try to repeat this it starts off with a very slow RoF and doesn't make it all the way through before it stops cycling. Switch to semi and it works but is. big sluggish. Any suggestions. The gun is a day old.

Green GAS GAS GAS... So what's everyone saying about gas? I have been using Abbey predator 144a which is basically the low power gas TM recommend. I am finding the fire rate to drop at the end of a mag dump. Have heard lots about Green gas. Do I need to do this green gas mod everyone is on about? seems like the newer mags don't need it. Also why would you need to do the mod in the first place? I assume green gas takes up more volume in the magazine? How's everyones durability when running Green? Would you say only use it in the cold? Any internal upgrade required for improve durability? Basically if I use Green gas in my gun am I gonna break it! Finally heard bits about Nuprol but I didnt think they were a good brand?

Sounds like the GHK is the right one for you. It is a tad more expensive, but more realistic. I believe it should be easier to remove the front post as well. The MWS rail requires something like the front sight post to keep it in place. I personally just bought an MWS but for all the opposite reasons. I want something with ultimate performance for skirmishing. and the TM is realistic enough that it gives me a sense of emersion. But from my research the GHK is much more like a real steel. I have even seen people fit them with real steal fire selectors, buffer tubes and stocks. Check out this YouTube channel. The guy bought one last year for very similar reasons to you.

What pistol grips and stocks is everyone rocking. I have a new basic MWS and want to trick it out with some sweet externals. Does everything fit or any brands to look out for?

Barrel cleaning, So who here removes their outer barrel and hop up to clean there barrel and who leaves it all attached. If you're careful and turn the hop off is it that bad to leave it on?

TM and leave the slide plastic, helps with the cold weather performance and higher RoF