JimFromHorsham

Just got my Hipower back from @EDcase, couldn’t of asked for more really , quick to reply , quick to the work which was at a very reasonable price , and very quick to get it returned . More projects will hopefully be on the way soon !! before - and after

I went ahead and fitted a Perun in my SR30 because I wanted to fit a warhead motor in there and the G&G ETU won’t let you switch off the AB , I’ve put perhaps 4-5k over 4 game mornings through and it’s been flawless , everything else is stock and I use G&G G2 mags in it , the Perun addition also retains the mag stop feature . Bit fiddly to program but got their after a few tries. I use 11.1 / 1100mah and it all still fits in the buffer tube . Perun is so simple I did it all on my own 😂 all my other AEGS have either Asters or Titans in which whilst great are a bit more involved in the fitting , you may lose some features and sometimes don’t go in as smoothly as you’d like ( or so I’ve witnessed from my gun minion 😛 )

The eBay gods smiled upon me , £22 delivered

Haven’t done any for airsoft , stuff changes way too quick in my hands 😂 couple of my keeper air rifles I have though 😎

Guarder kit arrived for the V-10 , another successful drop in with zero fettling required

mine is also sitting in the “to do” pile 😂

£450 ish , probably better off breaking it down and listing the bits separately on eBay though .

Helikon do nearly all sizes in their MBDU style , flat colours around £60 , Multicam goes up to around £100 I think . These are decent quality . if you want “combat” as in with knee pads then I’d just set up a search on eBay and hold out for second hand Crye 36L or similar .

If it’s at Stanford of No Hope , as said could be a week , could be the 35th of Neverember

Dogtag for me this morning , mixed bag really , played some area that haven’t been used in a long time so that was good as everyone was on an even footing with the layout . Marshalling was pretty decent , clear objectives (attack and defend 😂) and not so bad on boundaries . hit taking however was a bit poor , multiple times I had to take a breath and walk away , from players on both sides I might add 😕 . think I’ll pop along somewhere different when time permits , maybe Worthing or DriversWood , although being local and in touch with quite a few regulars the latter I hear very mixed accounts of player honesty , Marshall’s and site layout .

KWA I think

In a retail setting and Depending where you go I’d say £20-£40ph + parts 😕

Magpul’d the Apache , Magache? 🤷🏼‍♂️

certainly a game of two halves that thread 👍🏼

Many orders , no complaints

Nice and straight on these ones, same Lot# no. Too 💪🏼😎

genuine Troy Ind , AEG fitment 🤔

Do you have a tape measure ? All should become apparent with one of those

I wouldn’t advise soaking as such just incase the chinesium anodising goes funny , for odd shapes and awkward pieces I simply use an old tooth brush to work it in then rinse and repeat .

I’ve found acetone free nail varnish remover pretty good , you’ll need to strip it down as far as you can for the best job , use cotton wool pads / balls just use them like they are free , the paint will absorb into them and then start respreading the diluted paint , just draw the paint off in the same direction rather than scrub at it . After that I’d give the plastic parts a refresh with black Krylon .