JinxDuh

Versions. TN03 will be the 2022 edition, with prior issues fixed.

Real men carry mags in their pockets 💪

Bought a Cyma SVD from them, arrived with the stock hanging off so returned it. Sent an email with pictures, they replied once saying they'd look into it? They went quiet after that, I had to call numerous times and when I finally got through the guy was extremely rude. He said he’d call me back in an hour, never did. Rang them 3 hours after and the guy I originally spoke to answered and said “I told you I’ll call you when I’m ready” and hung up on me, so I rang back again and spoke to somebody else, one of their techs iirc. Got it all sorted and sent it back to them, again it went quiet. I emailed them twice with no answers, called and was told they had received the package and would call back once it was checked out. Spoiler: they didn’t. I left it for a week before calling them back again, turns out they “lost” the return slip that was in with the replica and they had no idea who the return was sent by or what was wrong with the replica (Despite the stock hanging off!!!). They finally informed me a replacement would be sent out, which was also delayed. All in all, it took me 3 weeks to receive my replacement purchase.

You can always donate it to me 😏 Not a VFC, but I went with a 470mm Maple Leaf hybrid inner for my WE A1 and it's performed really well paired with the unicorn bucking!

Yeah that guy is proper suspect, wouldn't trust them at all!

Have you removed the two grub screws on the side of the handguard that press against the receiver? Have you removed the two bolts that run through the base of the urgi handguard?

Elcans typically also have short eye relief. It sits somewhere in the middle of lpvo (good) and acog (bad) in terms of eye relief. You have to get a good position to clearly see down them. That being said, I do absolutely love my elcan and use it on a lot of my pews.

Yeah that's what I done haha Ironically the few pews I've put titans into have never had any issues!

I couldn't see an option to simply turn off active brake, it had "Adaptive" and "Manual". I noticed my nozzle has a small chunk knocked out of it, so I think the nozzle may be getting caught up on the shell or hop unit. Going to change it out tomorrow and try with the mosfet again, worst case scenario I'll move my RPK gearbox out into the AK105 as the RPK is now sat in the corner after being replaced by the PKM 😂

@Tackle Just renewed three ad's instinctively but can't do the time stamp pics until tomorrow, please don't ban me 🥺😂

After testing for about 30 minutes: I get the odd double feed My full auto cycle dry fires and then gets maybe 3 bb’s then back to dry firing Motor gets hot, very fast None of the above happened without the mosfet, I’m wondering if I’ve got a dodgy mosfet or it just doesn’t like LCT’s 🤔

It’s cured one issue and made another… it’ll feed, stop firing but if I move the selector it’ll carry on feeding 🤔😂

Cycle control is enabled, active brake is adaptive as standard. Turning active brake to manual and setting it to 0 seems to have cured the issue?

It's beautiful 🥺

At the risk of sounding very stupid (Me, asking stupid questions? Shocker I know!) I bought this... https://www.angrygun.com/products/angry-gun-steel-outer-barrel-nut-spacer-for-marui-mws-gbbr-series but have no idea where it goes, other than over the barrel. Does it literally just sit there and then I tighten my AEG barrel nut down over it?

I'll reinstall it tomorrow and check/update the post!

Three of my ak’s have had this issue, I look at the settings but it might as well be in Egyptian hieroglyphs. Probably make more sense too 🤣

Replaced the old wiring harness, working fine and every shot is coming out like should be so it’s definitely mosfet related

My LCT AK105 was firing lovely prior (Although underpowered at about .8j), I fitted a slim grip and motor and opted for the above gate aster to help get a more snappy trigger response (As well as monitor battery etc). Prior to fitting the mosfet, every trigger pull meant a BB would fly out the end… Testing today, every second shot the pew dry fires… this is the fourth replica (Both v2 and v3) that I’ve fitted an aster into that has ran into this issue and I’m still yet to work out why… I’m not 100% if it is the aster being the cause but it’s the only thing common in the 4 problematic builds, and the only thing I’ve changed in the LCT since it was working fine… Anybody have any ideas?!

Drop me a message with your postage details, I have a spare base knocking about from where I switched to the unity. I'll send it to you so you can salvage your purchase.

And it got chewed up by the T1. That normally only happens if it's forced on too tight which goes against what you've said. Does the mount have some damage or bending? 🤔

Is it a plastic receiver?