MistakenMexican
-
Posts
351 -
Joined
-
Last visited
-
Days Won
9 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by MistakenMexican
-
Time Left: 1 day and 15 hours
- For sale
- As new
For sale: brand new, made to order display stands for your kit. I currently have stands for the following: Glock Hicapa HK45 FN5-7 CZ P10 GHM9K (MP9 version) PCC45 MP7 Pistol stands are £9 plus postage (£4 flat rate) the SMG/PCC stands are £15 each plus postage (again, £4 flat rate). Base colours are blue or black. If you want other base colours, contact me and we’ll see what we can do. logo colours: black, blue, white, red, gold, glow in the dark (£1 extra). I have other colours I haven’t tried yet. I can accommodate more logos than the ones pictured. If you want a specific logo and it’s something not too complicated, I can do it. Also have to look at doing bespoke stands if you want them customised within reason.£9
-
Time Left: 1 day and 15 hours
- For sale
- As new
4 slides for TM glpicks. stock TM G19 gen4 slide w/ outer barrel and recoil rod: £40 stock TM G19 gen3 slide w/ barrel and recoil rod: £40 complete stock G17 gen4 upper inc internals: £70 wiitech TM G17 gen5 MOS aluminium slide w/ steel barrel and matching comp - £120 * notes: does not come with a MOS plate or internals. The MOS plate in the photo was from the wrong slide. Detonator TM Gen5 MOS standard edition aluminium slide w/ aluminium barrel - £170 G&P Ark strike industries titanium slide for a TM spec G17 gen3 (slide and recoil rod only) - £200. all slides are in full working condition. All mags sold. postage - £3.50 per order. I’ll send the detonator slide and ARK slide at a cost of £7 due to their value.£40
, South wales
-
Not really a question. But looking at the slide, it does look like a guarder aluminium slide. -
This advert is COMPLETED!
- For sale
- As new
Fully assembled (but untested) firewad AAP. The lower is printed from PLA-CF in two simultaneous colours - so despite being black and red, the lower is a solid piece. sold as seen as I don’t have an M4 AEG mag to test with. I’m sure it works as the donor AAP worked and the lower bb channels have been tested separately. The grip is G19 length as I finished this print early. A G19 WE mag is provided. But you could easily run a standard length mag if you wished. asking for £100 all in - which is the cost of the AAP and the cost of printing. Typically I’d charge a lot more for a fully assembled kit that I had verified.£100
, Monmouthshire - GB
-
This advert is COMPLETED!
- For sale
- Used
TM G19 gen4. In very good condition. The magazine pins looks a bit sad due to the previous owner trying his hand at repairing the mags. The mag has been resealed and is now leak free. It’s been tested and works reliably putting out around 0.6-0.7J over a whole magazine. completely stock. £120 all in.£120
, Monmouthshire - GB
-
This advert is COMPLETED!
- For sale
- As new
TM G34. largely stock with the following upgrades: TTI G34 slide (threaded for a tracer) guarder black inner barrel (6.03 I believe) Guarder extended slide stop in chrome TTI style magwell. fully functional. Happy to share videos of it on the chrono or dry firing. 1 stock TM mag included. Leak free. £155 all in to your door.£155
, Monmouthshire - GB
-
Got a new dremel with angle grinder pads. turns out gen3/4 triggers will fit the gen5 if you’re handy with a dremel. 🤣
-
Poorly shimmed AEG gear boxes really grind my gears.
- 54 replies
-
- 10
-
-
-
Time Left: 1 day and 15 hours
- For sale
- As new
4 x chrome desert eagle magazines for TM desert eagle. all fully functional and gas tight. £22 each all in. or I can do a deal on all 4 - £80 all in.£22
-
If you have the file to print it, and the licensing allows for it, then there’s a bunch of us that can print it. I typically print things for cost so that Airsofters can get what they want for their airsoft guns. Others do it as an actual business and charge different prices. if you need the design work doing, that’s were it gets expensive. If it’s something simple like a supressor or a small part, some people can CAD it for a small cost but something like a rail is quite labour intensive and may not be cost effective. Jez said “for £53 buy that one”. I think he’s right. The SRU pre-made one will likely be cheaper and better quality than getting some random bloke off the forums to print you one.
-
9:45am in stock at WGC. 10:15am. Sold out 🤣
-
Are Glock 17 and 18 exhaust valves universal
MistakenMexican replied to Wegalaxy's topic in Gas Guns
So to answer the title of the thread: No. some brands of glock have slightly different exhaust valves. But generally speaking most modern GBB glocks all use the same exhaust valve. To answer the actual question, I’m fairly sure the valve you’ve linked on AliExpress will fit. -
In my opinion, the M&P9L and hicapa 4.3 are vastly different pistols. The 9L is a “long barrel” pistol. Similar in length to the hicapa 5.1. Personally I’d recommend the Hicapa as they have a more abundant spare parts and upgrades. the M&Ps used to have loads of upgrades and spare parts but most of that has dried up as popularity dropped off.
-
maybe we can trust the TM to be a bit more reliable?
-
played a game at CQB Swindon back in the day. A bloke brought his 12 year old daughter along to play. She was absolutely lethal 🤣 she’d run around the corner screaming “you wouldn’t shoot a girl, would you?” - the little girls voice would give just enough pause that she’d get the drop on our team every single time 🤣
-
Macks airsoft dreamers of the week thread
MistakenMexican replied to Mack's topic in General Discussion
Back to this point of this thread 🤣 why buy an EXA brand new when you can buy one second hand (absolutely ragged) for retail. its a bargain though. It’s a great pistol…. That’s the justification for selling at re-fail rates. -
it still boggles my mind that people will buy a Vorsk or Nuprol Hicapa/glock over the Japanese equivalent. Lots of the Vorsk hicapas are a good £10 more than a TM Hicapa government model. yes they don’t look as fancy, but they’ll last much longer.
-
it’s looking promising 🤣 they have no excuses now they’ve done the new glocks, the P320, the pink P90 and the extra hicapas that literally no one was asking for 🤣
-
As they’ve built from the ground up, do you think the P320 will have a realistic ND feature? That would be quite exciting 🤣 Also, this bodes well for those who complain about no browning high power. Another 5 years and we might get one 🤣🤣
-
Winding up strangers on the internet is far from it 🤣 To be fair, they probably have standard Japanese work ethic of getting it perfect first try. Hence why they’re not pumping out a million variations of the same thing that break on the first game *cough**vorsk**cough*
-
Also, I’d be willing to bet the V2 G19 mags will just be V1 G19 mags with orange followers 🙈 they’d already adopted the awful pinned base design for G19 mags.
-
“TM can’t produce any more glocks” also TM…
-
This advert is COMPLETED!
- For sale
- Used
Largely stock TM G19 gen4. Fitted with a CCT steel guide rod. Fully functional. Comes with a G19 magazine. £130 all in. Can include upto 3 extra magazines for an extra £10 each.£130
, South Wales - GB
-
This advert is COMPLETED!
- For sale
- Used
3 x Tokyo Marui G17 V2 mags. all leak free and fully functional. £25 each plus postage. Or all 3 for £78 all in. Compatible will all generations of TM Glock. Will likely work on TM clones such as WE.£25
, South wales - GB
-
Hi all, I couldn’t find a thread specifically about the GHM9, so I thought I’d start one. I previously had two, the GHM9-G (glock mags) and GHM9-K (MP9 mags). I sold the GHM9-K recently as I didn’t use it. But I kept the GHM9-G as I use it and want to use it more. I really like it, however out of the box it has one big flaw - it’s gas efficiency. The stock mag only allows you to load 30bbs, which I think was probably strategic when they realised it wouldn’t finish a long mag. It would be fine in the height of summer, I could finish a 50rd mag. But terrible in typical British weather. Recently I’ve fitted a 230mm TBB which is hidden in the supressor and runs into a tracer. However, the muzzle energy shot up from 1.1J to 1.6J. This prompted me to find a way to reduce the muzzle power and increase the gas efficiency. This resulted in a nozzle valve spacer and a short stroke spacer. I also found my GHM9 stock had nothing on the end, so I made a knurled butt plate for the stock. I don’t have any photos, but there was quite a bit of work involved in getting guarder magazines to fit. I’ll have to wait until winter, but I’m hoping the end result is something that runs all year around!
- 1 reply
-
- 2
-
